lkml.org 
[lkml]   [2022]   [Aug]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 4.19 2/4] spi: spi-rspi: Fix PIO fallback on RZ platforms
Date
From: Biju Das <biju.das.jz@bp.renesas.com>

[ Upstream commit b620aa3a7be346f04ae7789b165937615c6ee8d3 ]

RSPI IP on RZ/{A, G2L} SoC's has the same signal for both interrupt
and DMA transfer request. Setting DMARS register for DMA transfer
makes the signal to work as a DMA transfer request signal and
subsequent interrupt requests to the interrupt controller
are masked.

PIO fallback does not work as interrupt signal is disabled.

This patch fixes this issue by re-enabling the interrupts by
calling dmaengine_synchronize().

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220721143449.879257-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-rspi.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
index d61120822f02..ef604e12a428 100644
--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -603,6 +603,10 @@ static int rspi_dma_transfer(struct rspi_data *rspi, struct sg_table *tx,
rspi->dma_callbacked, HZ);
if (ret > 0 && rspi->dma_callbacked) {
ret = 0;
+ if (tx)
+ dmaengine_synchronize(rspi->ctlr->dma_tx);
+ if (rx)
+ dmaengine_synchronize(rspi->ctlr->dma_rx);
} else {
if (!ret) {
dev_err(&rspi->master->dev, "DMA timeout\n");
--
2.35.1
\
 
 \ /
  Last update: 2022-08-01 21:06    [W:0.048 / U:3.968 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site