lkml.org 
[lkml]   [2022]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 0/3] phy: freescale: Add i.MX8qm Mixel LVDS PHY support
On 06-07-22, 11:48, Liu Ying wrote:
> Hi,
>
> This series aims to add Freescale i.MX8qm LVDS PHY driver and dt-binding
> support.
>
> The PHY IP is from Mixel, Inc.
> The PHY IP supports two LVDS PHYs, thus two LVDS channels.
>
> Each LVDS PHY may work by itself to support a LVDS display device.
>
> When two LVDS PHYs are enabled simultaneously, PHY configurations and reference
> clock rate have to be the same since there is only one set of PHY registers.
> In this case, the two LVDS PHYs are usually used to support a dual LVDS link
> display device, one as master PHY and the other as slave PHY.

Applied, thanks

--
~Vinod

\
 
 \ /
  Last update: 2022-07-08 07:14    [W:0.052 / U:25.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site