lkml.org 
[lkml]   [2022]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCHv3] iommu/arm-smmu-qcom: Add debug support for TLB sync timeouts
From
On 2022-07-08 10:42, Sai Prakash Ranjan wrote:
> TLB sync timeouts can be due to various reasons such as TBU power down
> or pending TCU/TBU invalidation/sync and so on. Debugging these often
> require dumping of some implementation defined registers to know the
> status of TBU/TCU operations and some of these registers are not
> accessible in non-secure world such as from kernel and requires SMC
> calls to read them in the secure world. So, add this debug support
> to dump implementation defined registers for TLB sync timeout issues.

FWIW,

Acked-by: Robin Murphy <robin.murphy@arm.com>

> Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
> ---
>
> Changes in v3:
> * Move this debug feature to arm-smmu-qcom-debug.c (Will Deacon).
> * Keep single ratelimit state and remove local variable (Robin).
>
> Changes in v2:
> * Use scm call consistently so that it works on older chipsets where
> some of these regs are secure registers.
> * Add device specific data to get the implementation defined register
> offsets.
>
> ---
> drivers/iommu/Kconfig | 10 ++
> drivers/iommu/arm/arm-smmu/Makefile | 1 +
> .../iommu/arm/arm-smmu/arm-smmu-qcom-debug.c | 142 ++++++++++++++++++
> drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 32 +++-
> drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h | 28 ++++
> drivers/iommu/arm/arm-smmu/arm-smmu.c | 6 +-
> drivers/iommu/arm/arm-smmu/arm-smmu.h | 1 +
> 7 files changed, 211 insertions(+), 9 deletions(-)
> create mode 100644 drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c
> create mode 100644 drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h
>
> diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
> index c79a0df090c0..5c5cb5bee8b6 100644
> --- a/drivers/iommu/Kconfig
> +++ b/drivers/iommu/Kconfig
> @@ -363,6 +363,16 @@ config ARM_SMMU_QCOM
> When running on a Qualcomm platform that has the custom variant
> of the ARM SMMU, this needs to be built into the SMMU driver.
>
> +config ARM_SMMU_QCOM_DEBUG
> + bool "ARM SMMU QCOM implementation defined debug support"
> + depends on ARM_SMMU_QCOM
> + help
> + Support for implementation specific debug features in ARM SMMU
> + hardware found in QTI platforms.
> +
> + Say Y here to enable debug for issues such as TLB sync timeouts
> + which requires implementation defined register dumps.
> +
> config ARM_SMMU_V3
> tristate "ARM Ltd. System MMU Version 3 (SMMUv3) Support"
> depends on ARM64
> diff --git a/drivers/iommu/arm/arm-smmu/Makefile b/drivers/iommu/arm/arm-smmu/Makefile
> index b0cc01aa20c9..2a5a95e8e3f9 100644
> --- a/drivers/iommu/arm/arm-smmu/Makefile
> +++ b/drivers/iommu/arm/arm-smmu/Makefile
> @@ -3,3 +3,4 @@ obj-$(CONFIG_QCOM_IOMMU) += qcom_iommu.o
> obj-$(CONFIG_ARM_SMMU) += arm_smmu.o
> arm_smmu-objs += arm-smmu.o arm-smmu-impl.o arm-smmu-nvidia.o
> arm_smmu-$(CONFIG_ARM_SMMU_QCOM) += arm-smmu-qcom.o
> +arm_smmu-$(CONFIG_ARM_SMMU_QCOM_DEBUG) += arm-smmu-qcom-debug.o
> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c
> new file mode 100644
> index 000000000000..6eed8e67a0ca
> --- /dev/null
> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c
> @@ -0,0 +1,142 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include <linux/of_device.h>
> +#include <linux/qcom_scm.h>
> +#include <linux/ratelimit.h>
> +
> +#include "arm-smmu.h"
> +#include "arm-smmu-qcom.h"
> +
> +enum qcom_smmu_impl_reg_offset {
> + QCOM_SMMU_TBU_PWR_STATUS,
> + QCOM_SMMU_STATS_SYNC_INV_TBU_ACK,
> + QCOM_SMMU_MMU2QSS_AND_SAFE_WAIT_CNTR,
> +};
> +
> +struct qcom_smmu_config {
> + const u32 *reg_offset;
> +};
> +
> +void qcom_smmu_tlb_sync_debug(struct arm_smmu_device *smmu)
> +{
> + int ret;
> + u32 tbu_pwr_status, sync_inv_ack, sync_inv_progress;
> + struct qcom_smmu *qsmmu = container_of(smmu, struct qcom_smmu, smmu);
> + const struct qcom_smmu_config *cfg;
> + static DEFINE_RATELIMIT_STATE(rs, DEFAULT_RATELIMIT_INTERVAL,
> + DEFAULT_RATELIMIT_BURST);
> +
> + if (__ratelimit(&rs)) {
> + dev_err(smmu->dev, "TLB sync timed out -- SMMU may be deadlocked\n");
> +
> + cfg = qsmmu->cfg;
> + if (!cfg)
> + return;
> +
> + ret = qcom_scm_io_readl(smmu->ioaddr + cfg->reg_offset[QCOM_SMMU_TBU_PWR_STATUS],
> + &tbu_pwr_status);
> + if (ret)
> + dev_err(smmu->dev,
> + "Failed to read TBU power status: %d\n", ret);
> +
> + ret = qcom_scm_io_readl(smmu->ioaddr + cfg->reg_offset[QCOM_SMMU_STATS_SYNC_INV_TBU_ACK],
> + &sync_inv_ack);
> + if (ret)
> + dev_err(smmu->dev,
> + "Failed to read TBU sync/inv ack status: %d\n", ret);
> +
> + ret = qcom_scm_io_readl(smmu->ioaddr + cfg->reg_offset[QCOM_SMMU_MMU2QSS_AND_SAFE_WAIT_CNTR],
> + &sync_inv_progress);
> + if (ret)
> + dev_err(smmu->dev,
> + "Failed to read TCU syn/inv progress: %d\n", ret);
> +
> + dev_err(smmu->dev,
> + "TBU: power_status %#x sync_inv_ack %#x sync_inv_progress %#x\n",
> + tbu_pwr_status, sync_inv_ack, sync_inv_progress);
> + }
> +}
> +
> +/* Implementation Defined Register Space 0 register offsets */
> +static const u32 qcom_smmu_impl0_reg_offset[] = {
> + [QCOM_SMMU_TBU_PWR_STATUS] = 0x2204,
> + [QCOM_SMMU_STATS_SYNC_INV_TBU_ACK] = 0x25dc,
> + [QCOM_SMMU_MMU2QSS_AND_SAFE_WAIT_CNTR] = 0x2670,
> +};
> +
> +static const struct qcom_smmu_config qcm2290_smmu_cfg = {
> + .reg_offset = qcom_smmu_impl0_reg_offset,
> +};
> +
> +static const struct qcom_smmu_config sc7180_smmu_cfg = {
> + .reg_offset = qcom_smmu_impl0_reg_offset,
> +};
> +
> +static const struct qcom_smmu_config sc7280_smmu_cfg = {
> + .reg_offset = qcom_smmu_impl0_reg_offset,
> +};
> +
> +static const struct qcom_smmu_config sc8180x_smmu_cfg = {
> + .reg_offset = qcom_smmu_impl0_reg_offset,
> +};
> +
> +static const struct qcom_smmu_config sc8280xp_smmu_cfg = {
> + .reg_offset = qcom_smmu_impl0_reg_offset,
> +};
> +
> +static const struct qcom_smmu_config sm6125_smmu_cfg = {
> + .reg_offset = qcom_smmu_impl0_reg_offset,
> +};
> +
> +static const struct qcom_smmu_config sm6350_smmu_cfg = {
> + .reg_offset = qcom_smmu_impl0_reg_offset,
> +};
> +
> +static const struct qcom_smmu_config sm8150_smmu_cfg = {
> + .reg_offset = qcom_smmu_impl0_reg_offset,
> +};
> +
> +static const struct qcom_smmu_config sm8250_smmu_cfg = {
> + .reg_offset = qcom_smmu_impl0_reg_offset,
> +};
> +
> +static const struct qcom_smmu_config sm8350_smmu_cfg = {
> + .reg_offset = qcom_smmu_impl0_reg_offset,
> +};
> +
> +static const struct qcom_smmu_config sm8450_smmu_cfg = {
> + .reg_offset = qcom_smmu_impl0_reg_offset,
> +};
> +
> +static const struct of_device_id __maybe_unused qcom_smmu_impl_debug_match[] = {
> + { .compatible = "qcom,msm8998-smmu-v2" },
> + { .compatible = "qcom,qcm2290-smmu-500", .data = &qcm2290_smmu_cfg },
> + { .compatible = "qcom,sc7180-smmu-500", .data = &sc7180_smmu_cfg },
> + { .compatible = "qcom,sc7280-smmu-500", .data = &sc7280_smmu_cfg},
> + { .compatible = "qcom,sc8180x-smmu-500", .data = &sc8180x_smmu_cfg },
> + { .compatible = "qcom,sc8280xp-smmu-500", .data = &sc8280xp_smmu_cfg },
> + { .compatible = "qcom,sdm630-smmu-v2" },
> + { .compatible = "qcom,sdm845-smmu-500" },
> + { .compatible = "qcom,sm6125-smmu-500", .data = &sm6125_smmu_cfg},
> + { .compatible = "qcom,sm6350-smmu-500", .data = &sm6350_smmu_cfg},
> + { .compatible = "qcom,sm8150-smmu-500", .data = &sm8150_smmu_cfg },
> + { .compatible = "qcom,sm8250-smmu-500", .data = &sm8250_smmu_cfg },
> + { .compatible = "qcom,sm8350-smmu-500", .data = &sm8350_smmu_cfg },
> + { .compatible = "qcom,sm8450-smmu-500", .data = &sm8450_smmu_cfg },
> + { }
> +};
> +
> +const void *qcom_smmu_impl_data(struct arm_smmu_device *smmu)
> +{
> + const struct of_device_id *match;
> + const struct device_node *np = smmu->dev->of_node;
> +
> + match = of_match_node(qcom_smmu_impl_debug_match, np);
> + if (!match)
> + return NULL;
> +
> + return match->data;
> +}
> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> index 2d470d867887..de25071e33ab 100644
> --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> @@ -5,23 +5,40 @@
>
> #include <linux/acpi.h>
> #include <linux/adreno-smmu-priv.h>
> +#include <linux/delay.h>
> #include <linux/of_device.h>
> #include <linux/qcom_scm.h>
>
> #include "arm-smmu.h"
> +#include "arm-smmu-qcom.h"
>
> -struct qcom_smmu {
> - struct arm_smmu_device smmu;
> - bool bypass_quirk;
> - u8 bypass_cbndx;
> - u32 stall_enabled;
> -};
> +#define QCOM_DUMMY_VAL -1
>
> static struct qcom_smmu *to_qcom_smmu(struct arm_smmu_device *smmu)
> {
> return container_of(smmu, struct qcom_smmu, smmu);
> }
>
> +static void qcom_smmu_tlb_sync(struct arm_smmu_device *smmu, int page,
> + int sync, int status)
> +{
> + unsigned int spin_cnt, delay;
> + u32 reg;
> +
> + arm_smmu_writel(smmu, page, sync, QCOM_DUMMY_VAL);
> + for (delay = 1; delay < TLB_LOOP_TIMEOUT; delay *= 2) {
> + for (spin_cnt = TLB_SPIN_COUNT; spin_cnt > 0; spin_cnt--) {
> + reg = arm_smmu_readl(smmu, page, status);
> + if (!(reg & ARM_SMMU_sTLBGSTATUS_GSACTIVE))
> + return;
> + cpu_relax();
> + }
> + udelay(delay);
> + }
> +
> + qcom_smmu_tlb_sync_debug(smmu);
> +}
> +
> static void qcom_adreno_smmu_write_sctlr(struct arm_smmu_device *smmu, int idx,
> u32 reg)
> {
> @@ -375,6 +392,7 @@ static const struct arm_smmu_impl qcom_smmu_impl = {
> .def_domain_type = qcom_smmu_def_domain_type,
> .reset = qcom_smmu500_reset,
> .write_s2cr = qcom_smmu_write_s2cr,
> + .tlb_sync = qcom_smmu_tlb_sync,
> };
>
> static const struct arm_smmu_impl qcom_adreno_smmu_impl = {
> @@ -383,6 +401,7 @@ static const struct arm_smmu_impl qcom_adreno_smmu_impl = {
> .reset = qcom_smmu500_reset,
> .alloc_context_bank = qcom_adreno_smmu_alloc_context_bank,
> .write_sctlr = qcom_adreno_smmu_write_sctlr,
> + .tlb_sync = qcom_smmu_tlb_sync,
> };
>
> static struct arm_smmu_device *qcom_smmu_create(struct arm_smmu_device *smmu,
> @@ -399,6 +418,7 @@ static struct arm_smmu_device *qcom_smmu_create(struct arm_smmu_device *smmu,
> return ERR_PTR(-ENOMEM);
>
> qsmmu->smmu.impl = impl;
> + qsmmu->cfg = qcom_smmu_impl_data(smmu);
>
> return &qsmmu->smmu;
> }
> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h
> new file mode 100644
> index 000000000000..99ec8f8629a0
> --- /dev/null
> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h
> @@ -0,0 +1,28 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#ifndef _ARM_SMMU_QCOM_H
> +#define _ARM_SMMU_QCOM_H
> +
> +struct qcom_smmu {
> + struct arm_smmu_device smmu;
> + const struct qcom_smmu_config *cfg;
> + bool bypass_quirk;
> + u8 bypass_cbndx;
> + u32 stall_enabled;
> +};
> +
> +#ifdef CONFIG_ARM_SMMU_QCOM_DEBUG
> +void qcom_smmu_tlb_sync_debug(struct arm_smmu_device *smmu);
> +const void *qcom_smmu_impl_data(struct arm_smmu_device *smmu);
> +#else
> +static inline void qcom_smmu_tlb_sync_debug(struct arm_smmu_device *smmu) { }
> +static inline const void *qcom_smmu_impl_data(struct arm_smmu_device *smmu)
> +{
> + return NULL;
> +}
> +#endif
> +
> +#endif /* _ARM_SMMU_QCOM_H */
> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.c b/drivers/iommu/arm/arm-smmu/arm-smmu.c
> index 2ed3594f384e..41633e5484f8 100644
> --- a/drivers/iommu/arm/arm-smmu/arm-smmu.c
> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu.c
> @@ -2074,7 +2074,6 @@ err_reset_platform_ops: __maybe_unused;
> static int arm_smmu_device_probe(struct platform_device *pdev)
> {
> struct resource *res;
> - resource_size_t ioaddr;
> struct arm_smmu_device *smmu;
> struct device *dev = &pdev->dev;
> int num_irqs, i, err;
> @@ -2098,7 +2097,8 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
> smmu->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
> if (IS_ERR(smmu->base))
> return PTR_ERR(smmu->base);
> - ioaddr = res->start;
> + smmu->ioaddr = res->start;
> +
> /*
> * The resource size should effectively match the value of SMMU_TOP;
> * stash that temporarily until we know PAGESIZE to validate it with.
> @@ -2178,7 +2178,7 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
> }
>
> err = iommu_device_sysfs_add(&smmu->iommu, smmu->dev, NULL,
> - "smmu.%pa", &ioaddr);
> + "smmu.%pa", &smmu->ioaddr);
> if (err) {
> dev_err(dev, "Failed to register iommu in sysfs\n");
> return err;
> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.h b/drivers/iommu/arm/arm-smmu/arm-smmu.h
> index 2b9b42fb6f30..703fd5817ec1 100644
> --- a/drivers/iommu/arm/arm-smmu/arm-smmu.h
> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu.h
> @@ -278,6 +278,7 @@ struct arm_smmu_device {
> struct device *dev;
>
> void __iomem *base;
> + phys_addr_t ioaddr;
> unsigned int numpage;
> unsigned int pgshift;
>

\
 
 \ /
  Last update: 2022-07-08 14:27    [W:1.167 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site