lkml.org 
[lkml]   [2022]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1 4/4] riscv: dts: sifive unmatched: Add PWM controlled LEDs
From
Date
On 7/5/22 2:01 PM, Emil Renner Berthing wrote:
> This adds the two PWM controlled LEDs to the HiFive Unmatched device
> tree. D12 is just a regular green diode, but D2 is an RGB diode with 3
> PWM inputs controlling the three different colours.
>
> Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
> ---
> .../boot/dts/sifive/hifive-unmatched-a00.dts | 42 +++++++++++++++++++
> 1 file changed, 42 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
> index c4ed9efdff03..beaefe74755a 100644
> --- a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
> +++ b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
> @@ -4,6 +4,8 @@
> #include "fu740-c000.dtsi"
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/pwm/pwm.h>
>
> /* Clock frequency (in Hz) of the PCB crystal for rtcclk */
> #define RTCCLK_FREQ 1000000
> @@ -44,6 +46,46 @@ gpio-poweroff {
> compatible = "gpio-poweroff";
> gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
> };
> +
> + led-controller-1 {
> + compatible = "pwm-leds";
> +
> + led-d12 {
> + pwms = <&pwm0 0 7812500 PWM_POLARITY_INVERTED>;
> + active-low;
> + color = <LED_COLOR_ID_GREEN>;
> + max-brightness = <255>;
> + label = "d12";
> + };
> + };
> +
> + led-controller-2 {
> + compatible = "pwm-leds-multicolor";
> +
> + multi-led {
> + color = <LED_COLOR_ID_RGB>;
> + max-brightness = <255>;
> + label = "d2";
> +
> + led-red {
> + pwms = <&pwm0 2 7812500 PWM_POLARITY_INVERTED>;
> + active-low;
> + color = <LED_COLOR_ID_RED>;
> + };
> +
> + led-green {
> + pwms = <&pwm0 1 7812500 PWM_POLARITY_INVERTED>;
> + active-low;
> + color = <LED_COLOR_ID_GREEN>;
> + };
> +
> + led-blue {
> + pwms = <&pwm0 3 7812500 PWM_POLARITY_INVERTED>;
> + active-low;
> + color = <LED_COLOR_ID_BLUE>;
> + };
> + };
> + };
> };
>
> &uart0 {

Tested on HiFive Unmatched with both udev and systemd. Works good.

Tested-by: Ron Economos <re@w6rz.net>

\
 
 \ /
  Last update: 2022-07-08 11:23    [W:0.093 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site