lkml.org 
[lkml]   [2022]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 2/2] PCI: qcom: Move all DBI register accesses after phy_power_on()
On Fri, Jul 08, 2022 at 02:17:09PM -0500, Bjorn Helgaas wrote:
> On Fri, Jul 08, 2022 at 07:02:48PM +0200, Christian Marangi wrote:
> > On Fri, Jul 08, 2022 at 06:47:57PM +0200, Christian Marangi wrote:
> > > On Fri, Jul 08, 2022 at 06:39:37PM +0200, Robert Marko wrote:
> > > > On Thu, 7 Jul 2022 at 21:41, Bjorn Helgaas <helgaas@kernel.org> wrote:
> > > > > On Fri, Jun 24, 2022 at 12:44:20PM +0200, Robert Marko wrote:
> > > > > > IPQ8074 requires the PHY to be powered on before accessing DBI registers.
> > > > > > It's not clear whether other variants have the same dependency, but there
> > > > > > seems to be no reason for them to be different, so move all the DBI
> > > > > > accesses from .init() to .post_init() so they are all after phy_power_on().
> > > > > >
> > > > > > Signed-off-by: Robert Marko <robimarko@gmail.com>
> > > > >
> > > > > Would any of the qcom driver folks care to review and ack this?
> > > > > Stanimir, Andy, Bjorn A (from get_maintainer.pl)?
> > >
> > > Hi Bjorn,
> > > I tested this on ipq806x and the current patch cause regression as pci
> > > doesn't work anymore...
> > > This is a before the patch [1] and this is an after [2].
> > >
> > > As you notice the main problem here is
> > > [ 2.559962] qcom-pcie 1b700000.pci: Phy link never came up
> > >
> > > The cause of this has already been bisected and actually it was a fixup
> > > pushed some time ago for 2_1_0.
> > >
> > > Uboot can leave the pci in an underfined state and this
> > > writel(1, pcie->parf + PCIE20_PARF_PHY_CTRL);
> > > is never called.
> > >
> > > This is mandatory to a correct init and MUST be called before regulator
> > > enable and reset deassert or the "Phy link never came up" problem is
> > > triggered.
> > >
> > > So to fix this we just have to have
> > > writel(1, pcie->parf + PCIE20_PARF_PHY_CTRL);
> > > in qcom_pcie_init_2_1_0 right after the reset_contro_assert.
> > >
> > > This command is also present in qcom_pcie_init_2_3_2 where the same
> > > exact reg is written so I assume 2_3_2 have the same regression and the
> > > write must be placed in init and can't be moved to post_init.
> > >
> > > Feel free to tell me how to proceed if I should post an additional patch
> > > or you prefer Robi to respin this with the few lines reverted.
> > >
> > > [1] https://gist.github.com/Ansuel/ec827319e585630356fc586273db6f0d
> > > [2] https://gist.github.com/Ansuel/63fbcab2681cd28a61ec52d7874fa30d
> >
> > While testing this I notice something odd...
> >
> > 2_4_2 prepare the pipe clock only AFTER PCIe clocks and reset are
> > enabled while in 2_1_0... That made me think there could be a problem
> > with the current code of 2_1_0... A quick change made me discover that
> > the problem is actually that we enable prepare_enable clock BEFORE the
> > value is written in PCIE20_PARF_PHY_CTRL.
> >
> > By moving the clk_bulk_prepare_enable after the "enable PCIe clocks and
> > resets" make the pci work with the current change...
> >
> > So it could be that the current changes are correct and it's really just
> > a bug in 2_1_0 enabling clock before writing the correct value...
> >
> > Tell me how to proceed... think at this point a good idea would be to
> > create a separate patch and fix this for good.
>
> Hmm, I think I made a mistake when I put this patch in the middle and
> applied other stuff on top of it. I'd like to just postpone this
> patch while we work out these issues, but I think it's not completely
> trivial since it's in the middle. I'll try to straighten this out
> next week.
>

From my discoveries it really seems just a bug in 2_1_0 with enabling
the phy clk BEFORE setting the require bit...

Moving the bulk_prepare_enable after the bit is set makes everything
works as it should... If you want I can send a patch as that is clearly
a bug and currenty we have a workaround in place...

(with the patch the workaround can be dropped aka we even remove a line
of code)

> > Also bonus question, should I drop the bulk_prepare_enable and follow
> > the pattern of 2_3_2 and enable aux, cfg, master and slave in init and
> > pipe in post init or I can keep it? (still have to test but I assume
> > that it will work.)
>
> I haven't looked at the code again, but will just offer the opinion
> that unnecessary differences in structure often hide bugs, and they're
> always minor speed bumps for readers.
>
> Bjorn

Considering it won't change anything and pci 2_1_0 use the bulk api...
calling each clock separately will actually makes things less
readable... Sooo think it's just a line to drop and a code move.

--
Ansuel

\
 
 \ /
  Last update: 2022-09-17 16:26    [W:0.092 / U:0.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site