lkml.org 
[lkml]   [2022]   [Jul]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH v14 00/12] Add soundcard support for sc7280 based platforms.
    On Thu 07 Jul 08:22 CDT 2022, Srinivasa Rao Mandadapu wrote:

    > This patch set is to add bolero digital macros, WCD and maxim codecs nodes
    > for audio on sc7280 based platforms.
    >
    > This patch set depends on:
    > [LPASS DTS: wcd related pinmux reorg]
    > -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=657389
    > [Clock DTS: reset control changes]
    > -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=638002
    > [Clock: External MCLK and reset control driver changes]
    > -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=650267

    As far as I understand I can't apply this series until Taniya's clock
    patches has been picked up?

    > [Clock DTS: lpasscc node disable and lpasscore node name changes]
    > -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=657325

    You're the author of these 3 other patch sets, so why are you asking me
    to stitch them together, instead of just sending me one series that I
    can easily apply.

    If you want your patches merged, make it easy for the maintainer to
    merge them!

    Regards,
    Bjorn

    >
    > Changes Since V13:
    > -- Move digital codecs enabling to separate wcd specific dtsi file in CRD 3.0+ patches.
    > -- Remove redundant output high setting in wcd reset node.
    > -- Revert external mclk name.
    > -- Update dependency list.
    > -- Rebase as per latest kernel repository.
    > Changes Since V12:
    > -- Update 'lpasscore' clock node name to lpass_core to match latest clock patches.
    > -- Update external mclk0 name and it's source node.
    > -- Move sound node to separate wcd specific dtsi file.
    > -- Move CRD specific lpass_cpu node Enabling to separate wcd specific dtsi file.
    > -- Update dependency list.
    > Changes Since V11:
    > -- Remove output-low pinconf setting in wcd-reset-n-sleep node.
    > -- Update dependency list.
    > Changes Since V10:
    > -- Modify digital macro codecs pin control labels.
    > -- Updated dependency list.
    > Changes Since V9:
    > -- Move wcd codec and digital codec nodes to sc7280-qcard file.
    > -- Modify the reg property as per link number in sound node.
    > -- Fix the us-euro pin control usage in wcd codec node.
    > -- Move wcd pin control nodes to specific crd board files.
    > -- Sort max98360a codec node in alphabetical order.
    > -- Modify the commit messages.
    > Changes Since V8:
    > -- Split patches as per sc7280 CRD revision 3, 4 and 5 boards.
    > -- Add corresponding dt nodes for herobrine crd boards.
    > -- Update dai-link node names as per dt-bindings in sound node.
    > -- Add reg property in sound node as per dt-bindings which was removed in previous series.
    > -- Fix typo errors.
    > -- Update wcd codec pin control properties in board specific files.
    > Changes Since V7:
    > -- Remove redundant interrupt names in soundwire node.
    > -- Fix typo errors.
    > -- Remove redundant reg property in sound node.
    > -- Rebased on top of latest kernel tip.
    > Changes Since V6:
    > -- Modify link-names and audio routing in a sound node.
    > -- Move amp_en pin control node to appropriate consumer patch.
    > -- Split patches as per digital macro codecs and board specific codecs and sort it.
    > -- Modify label and node names to lpass specific.
    > Changes Since V5:
    > -- Move soc specific bolero digital codec nodes to soc specific file.
    > -- Bring wcd938x codec reset pin control and US/EURO HS selection nodes from other series.
    > -- Change node name and remove redundant status property in sound node.
    > Changes Since V4:
    > -- Update nodes in sorting order.
    > -- Update DTS node names as per dt-bindings.
    > -- Update Node properties in proper order.
    > -- Update missing pinctrl properties like US/EURO HS selection, wcd reset control.
    > -- Remove redundant labels.
    > -- Remove unused size cells and address cells in tx macro node.
    > -- Keep all same nodes at one place, which are defined in same file.
    > -- Add max98360a codec node to herobrine board specific targets.
    > Changes Since V3:
    > -- Move digital codec macro nodes to board specific dtsi file.
    > -- Update pin controls in lpass cpu node.
    > -- Update dependency patch list.
    > -- Create patches on latest kernel.
    > Changes Since V2:
    > -- Add power domains to digital codec macro nodes.
    > -- Change clock node usage in lpass cpu node.
    > -- Add codec mem clock to lpass cpu node.
    > -- Modify the node names to be generic.
    > -- Move sound and codec nodes to root node.
    > -- sort dai links as per reg.
    > -- Fix typo errors.
    > Changes Since V1:
    > -- Update the commit message of cpu node patch.
    > -- Add gpio control property to support Euro headset in wcd938x node.
    > -- Fix clock properties in lpass cpu and digital codec macro node.
    >
    > Srinivasa Rao Mandadapu (12):
    > arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital
    > macro codecs
    > arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD
    > 1.0/2.0 and IDP boards
    > arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD
    > 3.0/3.1
    > arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 1.0/2.0 and
    > IDP boards
    > arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 3.0/3.1
    > arm64: dts: qcom: sc7280: Add max98360a codec for CRD 1.0/2.0 and IDP
    > boards
    > arm64: dts: qcom: sc7280: herobrine: Add max98360a codec node
    > arm64: dts: qcom: sc7280: Add lpass cpu node
    > arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 1.0/2.0 and
    > IDP boards.
    > arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 3.0/3.1
    > arm64: dts: qcom: sc7280: Add sound node for CRD 1.0/2.0 and IDP
    > boards
    > arm64: dts: qcom: sc7280: Add sound node for CRD 3.0/3.1
    >
    > arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 37 ++++
    > .../dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi | 155 +++++++++++++++
    > arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 8 +
    > arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 216 +++++++++++++++++++++
    > arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 73 +++++++
    > arch/arm64/boot/dts/qcom/sc7280.dtsi | 190 ++++++++++++++++++
    > 6 files changed, 679 insertions(+)
    >
    > --
    > 2.7.4
    >

    \
     
     \ /
      Last update: 2022-07-07 17:29    [W:3.488 / U:0.068 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site