lkml.org 
[lkml]   [2022]   [Jul]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] ARM: dts: kswitch-d10: enable the USB device port
Date
Now that there is driver support for the USB device, enable it.

Signed-off-by: Michael Walle <michael@walle.cc>
---
changes since v1:
- add pinctrl node, Thanks Claudiu

.../boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
index 5a6c5f7c371a..3eecaa1b7205 100644
--- a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
+++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
@@ -76,6 +76,12 @@ usart0_pins: usart0-pins {
pins = "GPIO_25", "GPIO_26";
function = "fc0_b";
};
+
+ usbs_a_pins: usbs-a-pins {
+ /* VBUS_DET */
+ pins = "GPIO_66";
+ function = "gpio";
+ };
};

&mdio0 {
@@ -200,6 +206,13 @@ &switch {
status = "okay";
};

+&udc {
+ pinctrl-0 = <&usbs_a_pins>;
+ pinctrl-names = "default";
+ atmel,vbus-gpio = <&gpio 66 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
&watchdog {
status = "okay";
};
--
2.30.2
\
 
 \ /
  Last update: 2022-07-07 15:26    [W:0.062 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site