lkml.org 
[lkml]   [2022]   [Jul]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] drm/msm/dsi: fix the inconsistent indenting
Date
Fix the inconsistent indenting in function msm_dsi_dphy_timing_calc_v3().

Fix the following smatch warnings:

drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:350 msm_dsi_dphy_timing_calc_v3() warn: inconsistent indenting

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: sunliming <sunliming@kylinos.cn>
---
2 | 947 ++++++++++++++++++++++++++
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 2 +-
2 files changed, 948 insertions(+), 1 deletion(-)
create mode 100644 2

diff --git a/2 b/2
new file mode 100644
index 000000000000..56dfa2d24be1
--- /dev/null
+++ b/2
@@ -0,0 +1,947 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+#include <dt-bindings/phy/phy.h>
+
+#include "dsi_phy.h"
+
+#define S_DIV_ROUND_UP(n, d) \
+ (((n) >= 0) ? (((n) + (d) - 1) / (d)) : (((n) - (d) + 1) / (d)))
+
+static inline s32 linear_inter(s32 tmax, s32 tmin, s32 percent,
+ s32 min_result, bool even)
+{
+ s32 v;
+
+ v = (tmax - tmin) * percent;
+ v = S_DIV_ROUND_UP(v, 100) + tmin;
+ if (even && (v & 0x1))
+ return max_t(s32, min_result, v - 1);
+ else
+ return max_t(s32, min_result, v);
+}
+
+static void dsi_dphy_timing_calc_clk_zero(struct msm_dsi_dphy_timing *timing,
+ s32 ui, s32 coeff, s32 pcnt)
+{
+ s32 tmax, tmin, clk_z;
+ s32 temp;
+
+ /* reset */
+ temp = 300 * coeff - ((timing->clk_prepare >> 1) + 1) * 2 * ui;
+ tmin = S_DIV_ROUND_UP(temp, ui) - 2;
+ if (tmin > 255) {
+ tmax = 511;
+ clk_z = linear_inter(2 * tmin, tmin, pcnt, 0, true);
+ } else {
+ tmax = 255;
+ clk_z = linear_inter(tmax, tmin, pcnt, 0, true);
+ }
+
+ /* adjust */
+ temp = (timing->hs_rqst + timing->clk_prepare + clk_z) & 0x7;
+ timing->clk_zero = clk_z + 8 - temp;
+}
+
+int msm_dsi_dphy_timing_calc(struct msm_dsi_dphy_timing *timing,
+ struct msm_dsi_phy_clk_request *clk_req)
+{
+ const unsigned long bit_rate = clk_req->bitclk_rate;
+ const unsigned long esc_rate = clk_req->escclk_rate;
+ s32 ui, lpx;
+ s32 tmax, tmin;
+ s32 pcnt0 = 10;
+ s32 pcnt1 = (bit_rate > 1200000000) ? 15 : 10;
+ s32 pcnt2 = 10;
+ s32 pcnt3 = (bit_rate > 180000000) ? 10 : 40;
+ s32 coeff = 1000; /* Precision, should avoid overflow */
+ s32 temp;
+
+ if (!bit_rate || !esc_rate)
+ return -EINVAL;
+
+ ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
+ lpx = mult_frac(NSEC_PER_MSEC, coeff, esc_rate / 1000);
+
+ tmax = S_DIV_ROUND_UP(95 * coeff, ui) - 2;
+ tmin = S_DIV_ROUND_UP(38 * coeff, ui) - 2;
+ timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, true);
+
+ temp = lpx / ui;
+ if (temp & 0x1)
+ timing->hs_rqst = temp;
+ else
+ timing->hs_rqst = max_t(s32, 0, temp - 2);
+
+ /* Calculate clk_zero after clk_prepare and hs_rqst */
+ dsi_dphy_timing_calc_clk_zero(timing, ui, coeff, pcnt2);
+
+ temp = 105 * coeff + 12 * ui - 20 * coeff;
+ tmax = S_DIV_ROUND_UP(temp, ui) - 2;
+ tmin = S_DIV_ROUND_UP(60 * coeff, ui) - 2;
+ timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, true);
+
+ temp = 85 * coeff + 6 * ui;
+ tmax = S_DIV_ROUND_UP(temp, ui) - 2;
+ temp = 40 * coeff + 4 * ui;
+ tmin = S_DIV_ROUND_UP(temp, ui) - 2;
+ timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, true);
+
+ tmax = 255;
+ temp = ((timing->hs_prepare >> 1) + 1) * 2 * ui + 2 * ui;
+ temp = 145 * coeff + 10 * ui - temp;
+ tmin = S_DIV_ROUND_UP(temp, ui) - 2;
+ timing->hs_zero = linear_inter(tmax, tmin, pcnt2, 24, true);
+
+ temp = 105 * coeff + 12 * ui - 20 * coeff;
+ tmax = S_DIV_ROUND_UP(temp, ui) - 2;
+ temp = 60 * coeff + 4 * ui;
+ tmin = DIV_ROUND_UP(temp, ui) - 2;
+ timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, true);
+
+ tmax = 255;
+ tmin = S_DIV_ROUND_UP(100 * coeff, ui) - 2;
+ timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, true);
+
+ tmax = 63;
+ temp = ((timing->hs_exit >> 1) + 1) * 2 * ui;
+ temp = 60 * coeff + 52 * ui - 24 * ui - temp;
+ tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1;
+ timing->shared_timings.clk_post = linear_inter(tmax, tmin, pcnt2, 0,
+ false);
+ tmax = 63;
+ temp = ((timing->clk_prepare >> 1) + 1) * 2 * ui;
+ temp += ((timing->clk_zero >> 1) + 1) * 2 * ui;
+ temp += 8 * ui + lpx;
+ tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1;
+ if (tmin > tmax) {
+ temp = linear_inter(2 * tmax, tmin, pcnt2, 0, false);
+ timing->shared_timings.clk_pre = temp >> 1;
+ timing->shared_timings.clk_pre_inc_by_2 = true;
+ } else {
+ timing->shared_timings.clk_pre =
+ linear_inter(tmax, tmin, pcnt2, 0, false);
+ timing->shared_timings.clk_pre_inc_by_2 = false;
+ }
+
+ timing->ta_go = 3;
+ timing->ta_sure = 0;
+ timing->ta_get = 4;
+
+ DBG("PHY timings: %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
+ timing->shared_timings.clk_pre, timing->shared_timings.clk_post,
+ timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero,
+ timing->clk_trail, timing->clk_prepare, timing->hs_exit,
+ timing->hs_zero, timing->hs_prepare, timing->hs_trail,
+ timing->hs_rqst);
+
+ return 0;
+}
+
+int msm_dsi_dphy_timing_calc_v2(struct msm_dsi_dphy_timing *timing,
+ struct msm_dsi_phy_clk_request *clk_req)
+{
+ const unsigned long bit_rate = clk_req->bitclk_rate;
+ const unsigned long esc_rate = clk_req->escclk_rate;
+ s32 ui, ui_x8;
+ s32 tmax, tmin;
+ s32 pcnt0 = 50;
+ s32 pcnt1 = 50;
+ s32 pcnt2 = 10;
+ s32 pcnt3 = 30;
+ s32 pcnt4 = 10;
+ s32 pcnt5 = 2;
+ s32 coeff = 1000; /* Precision, should avoid overflow */
+ s32 hb_en, hb_en_ckln, pd_ckln, pd;
+ s32 val, val_ckln;
+ s32 temp;
+
+ if (!bit_rate || !esc_rate)
+ return -EINVAL;
+
+ timing->hs_halfbyte_en = 0;
+ hb_en = 0;
+ timing->hs_halfbyte_en_ckln = 0;
+ hb_en_ckln = 0;
+ timing->hs_prep_dly_ckln = (bit_rate > 100000000) ? 0 : 3;
+ pd_ckln = timing->hs_prep_dly_ckln;
+ timing->hs_prep_dly = (bit_rate > 120000000) ? 0 : 1;
+ pd = timing->hs_prep_dly;
+
+ val = (hb_en << 2) + (pd << 1);
+ val_ckln = (hb_en_ckln << 2) + (pd_ckln << 1);
+
+ ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
+ ui_x8 = ui << 3;
+
+ temp = S_DIV_ROUND_UP(38 * coeff - val_ckln * ui, ui_x8);
+ tmin = max_t(s32, temp, 0);
+ temp = (95 * coeff - val_ckln * ui) / ui_x8;
+ tmax = max_t(s32, temp, 0);
+ timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, false);
+
+ temp = 300 * coeff - ((timing->clk_prepare << 3) + val_ckln) * ui;
+ tmin = S_DIV_ROUND_UP(temp - 11 * ui, ui_x8) - 3;
+ tmax = (tmin > 255) ? 511 : 255;
+ timing->clk_zero = linear_inter(tmax, tmin, pcnt5, 0, false);
+
+ tmin = DIV_ROUND_UP(60 * coeff + 3 * ui, ui_x8);
+ temp = 105 * coeff + 12 * ui - 20 * coeff;
+ tmax = (temp + 3 * ui) / ui_x8;
+ timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
+
+ temp = S_DIV_ROUND_UP(40 * coeff + 4 * ui - val * ui, ui_x8);
+ tmin = max_t(s32, temp, 0);
+ temp = (85 * coeff + 6 * ui - val * ui) / ui_x8;
+ tmax = max_t(s32, temp, 0);
+ timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, false);
+
+ temp = 145 * coeff + 10 * ui - ((timing->hs_prepare << 3) + val) * ui;
+ tmin = S_DIV_ROUND_UP(temp - 11 * ui, ui_x8) - 3;
+ tmax = 255;
+ timing->hs_zero = linear_inter(tmax, tmin, pcnt4, 0, false);
+
+ tmin = DIV_ROUND_UP(60 * coeff + 4 * ui + 3 * ui, ui_x8);
+ temp = 105 * coeff + 12 * ui - 20 * coeff;
+ tmax = (temp + 3 * ui) / ui_x8;
+ timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
+
+ temp = 50 * coeff + ((hb_en << 2) - 8) * ui;
+ timing->hs_rqst = S_DIV_ROUND_UP(temp, ui_x8);
+
+ tmin = DIV_ROUND_UP(100 * coeff, ui_x8) - 1;
+ tmax = 255;
+ timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, false);
+
+ temp = 50 * coeff + ((hb_en_ckln << 2) - 8) * ui;
+ timing->hs_rqst_ckln = S_DIV_ROUND_UP(temp, ui_x8);
+
+ temp = 60 * coeff + 52 * ui - 43 * ui;
+ tmin = DIV_ROUND_UP(temp, ui_x8) - 1;
+ tmax = 63;
+ timing->shared_timings.clk_post =
+ linear_inter(tmax, tmin, pcnt2, 0, false);
+
+ temp = 8 * ui + ((timing->clk_prepare << 3) + val_ckln) * ui;
+ temp += (((timing->clk_zero + 3) << 3) + 11 - (pd_ckln << 1)) * ui;
+ temp += hb_en_ckln ? (((timing->hs_rqst_ckln << 3) + 4) * ui) :
+ (((timing->hs_rqst_ckln << 3) + 8) * ui);
+ tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
+ tmax = 63;
+ if (tmin > tmax) {
+ temp = linear_inter(tmax << 1, tmin, pcnt2, 0, false);
+ timing->shared_timings.clk_pre = temp >> 1;
+ timing->shared_timings.clk_pre_inc_by_2 = 1;
+ } else {
+ timing->shared_timings.clk_pre =
+ linear_inter(tmax, tmin, pcnt2, 0, false);
+ timing->shared_timings.clk_pre_inc_by_2 = 0;
+ }
+
+ timing->ta_go = 3;
+ timing->ta_sure = 0;
+ timing->ta_get = 4;
+
+ DBG("%d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
+ timing->shared_timings.clk_pre, timing->shared_timings.clk_post,
+ timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero,
+ timing->clk_trail, timing->clk_prepare, timing->hs_exit,
+ timing->hs_zero, timing->hs_prepare, timing->hs_trail,
+ timing->hs_rqst, timing->hs_rqst_ckln, timing->hs_halfbyte_en,
+ timing->hs_halfbyte_en_ckln, timing->hs_prep_dly,
+ timing->hs_prep_dly_ckln);
+
+ return 0;
+}
+
+int msm_dsi_dphy_timing_calc_v3(struct msm_dsi_dphy_timing *timing,
+ struct msm_dsi_phy_clk_request *clk_req)
+{
+ const unsigned long bit_rate = clk_req->bitclk_rate;
+ const unsigned long esc_rate = clk_req->escclk_rate;
+ s32 ui, ui_x8;
+ s32 tmax, tmin;
+ s32 pcnt0 = 50;
+ s32 pcnt1 = 50;
+ s32 pcnt2 = 10;
+ s32 pcnt3 = 30;
+ s32 pcnt4 = 10;
+ s32 pcnt5 = 2;
+ s32 coeff = 1000; /* Precision, should avoid overflow */
+ s32 hb_en, hb_en_ckln;
+ s32 temp;
+
+ if (!bit_rate || !esc_rate)
+ return -EINVAL;
+
+ timing->hs_halfbyte_en = 0;
+ hb_en = 0;
+ timing->hs_halfbyte_en_ckln = 0;
+ hb_en_ckln = 0;
+
+ ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
+ ui_x8 = ui << 3;
+
+ temp = S_DIV_ROUND_UP(38 * coeff, ui_x8);
+ tmin = max_t(s32, temp, 0);
+ temp = (95 * coeff) / ui_x8;
+ tmax = max_t(s32, temp, 0);
+ timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, false);
+
+ temp = 300 * coeff - (timing->clk_prepare << 3) * ui;
+ tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
+ tmax = (tmin > 255) ? 511 : 255;
+ timing->clk_zero = linear_inter(tmax, tmin, pcnt5, 0, false);
+
+ tmin = DIV_ROUND_UP(60 * coeff + 3 * ui, ui_x8);
+ temp = 105 * coeff + 12 * ui - 20 * coeff;
+ tmax = (temp + 3 * ui) / ui_x8;
+ timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
+
+ temp = S_DIV_ROUND_UP(40 * coeff + 4 * ui, ui_x8);
+ tmin = max_t(s32, temp, 0);
+ temp = (85 * coeff + 6 * ui) / ui_x8;
+ tmax = max_t(s32, temp, 0);
+ timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, false);
+
+ temp = 145 * coeff + 10 * ui - (timing->hs_prepare << 3) * ui;
+ tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
+ tmax = 255;
+ timing->hs_zero = linear_inter(tmax, tmin, pcnt4, 0, false);
+
+ tmin = DIV_ROUND_UP(60 * coeff + 4 * ui, ui_x8) - 1;
+ temp = 105 * coeff + 12 * ui - 20 * coeff;
+ tmax = (temp / ui_x8) - 1;
+ timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
+
+ temp = 50 * coeff + ((hb_en << 2) - 8) * ui;
+ timing->hs_rqst = S_DIV_ROUND_UP(temp, ui_x8);
+
+ tmin = DIV_ROUND_UP(100 * coeff, ui_x8) - 1;
+ tmax = 255;
+ timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, false);
+
+ temp = 50 * coeff + ((hb_en_ckln << 2) - 8) * ui;
+ timing->hs_rqst_ckln = S_DIV_ROUND_UP(temp, ui_x8);
+
+ temp = 60 * coeff + 52 * ui - 43 * ui;
+ tmin = DIV_ROUND_UP(temp, ui_x8) - 1;
+ tmax = 63;
+ timing->shared_timings.clk_post =
+ linear_inter(tmax, tmin, pcnt2, 0, false);
+
+ temp = 8 * ui + (timing->clk_prepare << 3) * ui;
+ temp += (((timing->clk_zero + 3) << 3) + 11) * ui;
+ temp += hb_en_ckln ? (((timing->hs_rqst_ckln << 3) + 4) * ui) :
+ (((timing->hs_rqst_ckln << 3) + 8) * ui);
+ tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
+ tmax = 63;
+ if (tmin > tmax) {
+ temp = linear_inter(tmax << 1, tmin, pcnt2, 0, false);
+ timing->shared_timings.clk_pre = temp >> 1;
+ timing->shared_timings.clk_pre_inc_by_2 = 1;
+ } else {
+ timing->shared_timings.clk_pre =
+ linear_inter(tmax, tmin, pcnt2, 0, false);
+ timing->shared_timings.clk_pre_inc_by_2 = 0;
+ }
+
+ timing->ta_go = 3;
+ timing->ta_sure = 0;
+ timing->ta_get = 4;
+
+ DBG("%d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
+ timing->shared_timings.clk_pre, timing->shared_timings.clk_post,
+ timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero,
+ timing->clk_trail, timing->clk_prepare, timing->hs_exit,
+ timing->hs_zero, timing->hs_prepare, timing->hs_trail,
+ timing->hs_rqst, timing->hs_rqst_ckln, timing->hs_halfbyte_en,
+ timing->hs_halfbyte_en_ckln, timing->hs_prep_dly,
+ timing->hs_prep_dly_ckln);
+
+ return 0;
+}
+
+int msm_dsi_dphy_timing_calc_v4(struct msm_dsi_dphy_timing *timing,
+ struct msm_dsi_phy_clk_request *clk_req)
+{
+ const unsigned long bit_rate = clk_req->bitclk_rate;
+ const unsigned long esc_rate = clk_req->escclk_rate;
+ s32 ui, ui_x8;
+ s32 tmax, tmin;
+ s32 pcnt_clk_prep = 50;
+ s32 pcnt_clk_zero = 2;
+ s32 pcnt_clk_trail = 30;
+ s32 pcnt_hs_prep = 50;
+ s32 pcnt_hs_zero = 10;
+ s32 pcnt_hs_trail = 30;
+ s32 pcnt_hs_exit = 10;
+ s32 coeff = 1000; /* Precision, should avoid overflow */
+ s32 hb_en;
+ s32 temp;
+
+ if (!bit_rate || !esc_rate)
+ return -EINVAL;
+
+ hb_en = 0;
+
+ ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
+ ui_x8 = ui << 3;
+
+ /* TODO: verify these calculations against latest downstream driver
+ * everything except clk_post/clk_pre uses calculations from v3 based
+ * on the downstream driver having the same calculations for v3 and v4
+ */
+
+ temp = S_DIV_ROUND_UP(38 * coeff, ui_x8);
+ tmin = max_t(s32, temp, 0);
+ temp = (95 * coeff) / ui_x8;
+ tmax = max_t(s32, temp, 0);
+ timing->clk_prepare = linear_inter(tmax, tmin, pcnt_clk_prep, 0, false);
+
+ temp = 300 * coeff - (timing->clk_prepare << 3) * ui;
+ tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
+ tmax = (tmin > 255) ? 511 : 255;
+ timing->clk_zero = linear_inter(tmax, tmin, pcnt_clk_zero, 0, false);
+
+ tmin = DIV_ROUND_UP(60 * coeff + 3 * ui, ui_x8);
+ temp = 105 * coeff + 12 * ui - 20 * coeff;
+ tmax = (temp + 3 * ui) / ui_x8;
+ timing->clk_trail = linear_inter(tmax, tmin, pcnt_clk_trail, 0, false);
+
+ temp = S_DIV_ROUND_UP(40 * coeff + 4 * ui, ui_x8);
+ tmin = max_t(s32, temp, 0);
+ temp = (85 * coeff + 6 * ui) / ui_x8;
+ tmax = max_t(s32, temp, 0);
+ timing->hs_prepare = linear_inter(tmax, tmin, pcnt_hs_prep, 0, false);
+
+ temp = 145 * coeff + 10 * ui - (timing->hs_prepare << 3) * ui;
+ tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
+ tmax = 255;
+ timing->hs_zero = linear_inter(tmax, tmin, pcnt_hs_zero, 0, false);
+
+ tmin = DIV_ROUND_UP(60 * coeff + 4 * ui, ui_x8) - 1;
+ temp = 105 * coeff + 12 * ui - 20 * coeff;
+ tmax = (temp / ui_x8) - 1;
+ timing->hs_trail = linear_inter(tmax, tmin, pcnt_hs_trail, 0, false);
+
+ temp = 50 * coeff + ((hb_en << 2) - 8) * ui;
+ timing->hs_rqst = S_DIV_ROUND_UP(temp, ui_x8);
+
+ tmin = DIV_ROUND_UP(100 * coeff, ui_x8) - 1;
+ tmax = 255;
+ timing->hs_exit = linear_inter(tmax, tmin, pcnt_hs_exit, 0, false);
+
+ /* recommended min
+ * = roundup((mipi_min_ns + t_hs_trail_ns)/(16*bit_clk_ns), 0) - 1
+ */
+ temp = 60 * coeff + 52 * ui + + (timing->hs_trail + 1) * ui_x8;
+ tmin = DIV_ROUND_UP(temp, 16 * ui) - 1;
+ tmax = 255;
+ timing->shared_timings.clk_post = linear_inter(tmax, tmin, 5, 0, false);
+
+ /* recommended min
+ * val1 = (tlpx_ns + clk_prepare_ns + clk_zero_ns + hs_rqst_ns)
+ * val2 = (16 * bit_clk_ns)
+ * final = roundup(val1/val2, 0) - 1
+ */
+ temp = 52 * coeff + (timing->clk_prepare + timing->clk_zero + 1) * ui_x8 + 54 * coeff;
+ tmin = DIV_ROUND_UP(temp, 16 * ui) - 1;
+ tmax = 255;
+ timing->shared_timings.clk_pre = DIV_ROUND_UP((tmax - tmin) * 125, 10000) + tmin;
+
+ DBG("%d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
+ timing->shared_timings.clk_pre, timing->shared_timings.clk_post,
+ timing->clk_zero, timing->clk_trail, timing->clk_prepare, timing->hs_exit,
+ timing->hs_zero, timing->hs_prepare, timing->hs_trail, timing->hs_rqst);
+
+ return 0;
+}
+
+int msm_dsi_cphy_timing_calc_v4(struct msm_dsi_dphy_timing *timing,
+ struct msm_dsi_phy_clk_request *clk_req)
+{
+ const unsigned long bit_rate = clk_req->bitclk_rate;
+ const unsigned long esc_rate = clk_req->escclk_rate;
+ s32 ui, ui_x7;
+ s32 tmax, tmin;
+ s32 coeff = 1000; /* Precision, should avoid overflow */
+ s32 temp;
+
+ if (!bit_rate || !esc_rate)
+ return -EINVAL;
+
+ ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
+ ui_x7 = ui * 7;
+
+ temp = S_DIV_ROUND_UP(38 * coeff, ui_x7);
+ tmin = max_t(s32, temp, 0);
+ temp = (95 * coeff) / ui_x7;
+ tmax = max_t(s32, temp, 0);
+ timing->clk_prepare = linear_inter(tmax, tmin, 50, 0, false);
+
+ tmin = DIV_ROUND_UP(50 * coeff, ui_x7);
+ tmax = 255;
+ timing->hs_rqst = linear_inter(tmax, tmin, 1, 0, false);
+
+ tmin = DIV_ROUND_UP(100 * coeff, ui_x7) - 1;
+ tmax = 255;
+ timing->hs_exit = linear_inter(tmax, tmin, 10, 0, false);
+
+ tmin = 1;
+ tmax = 32;
+ timing->shared_timings.clk_post = linear_inter(tmax, tmin, 80, 0, false);
+
+ tmin = min_t(s32, 64, S_DIV_ROUND_UP(262 * coeff, ui_x7) - 1);
+ tmax = 64;
+ timing->shared_timings.clk_pre = linear_inter(tmax, tmin, 20, 0, false);
+
+ DBG("%d, %d, %d, %d, %d",
+ timing->shared_timings.clk_pre, timing->shared_timings.clk_post,
+ timing->clk_prepare, timing->hs_exit, timing->hs_rqst);
+
+ return 0;
+}
+
+static int dsi_phy_regulator_init(struct msm_dsi_phy *phy)
+{
+ struct regulator_bulk_data *s = phy->supplies;
+ const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
+ struct device *dev = &phy->pdev->dev;
+ int num = phy->cfg->reg_cfg.num;
+ int i, ret;
+
+ for (i = 0; i < num; i++)
+ s[i].supply = regs[i].name;
+
+ ret = devm_regulator_bulk_get(dev, num, s);
+ if (ret < 0) {
+ if (ret != -EPROBE_DEFER) {
+ DRM_DEV_ERROR(dev,
+ "%s: failed to init regulator, ret=%d\n",
+ __func__, ret);
+ }
+
+ return ret;
+ }
+
+ return 0;
+}
+
+static void dsi_phy_regulator_disable(struct msm_dsi_phy *phy)
+{
+ struct regulator_bulk_data *s = phy->supplies;
+ const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
+ int num = phy->cfg->reg_cfg.num;
+ int i;
+
+ DBG("");
+ for (i = num - 1; i >= 0; i--)
+ if (regs[i].disable_load >= 0)
+ regulator_set_load(s[i].consumer, regs[i].disable_load);
+
+ regulator_bulk_disable(num, s);
+}
+
+static int dsi_phy_regulator_enable(struct msm_dsi_phy *phy)
+{
+ struct regulator_bulk_data *s = phy->supplies;
+ const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
+ struct device *dev = &phy->pdev->dev;
+ int num = phy->cfg->reg_cfg.num;
+ int ret, i;
+
+ DBG("");
+ for (i = 0; i < num; i++) {
+ if (regs[i].enable_load >= 0) {
+ ret = regulator_set_load(s[i].consumer,
+ regs[i].enable_load);
+ if (ret < 0) {
+ DRM_DEV_ERROR(dev,
+ "regulator %d set op mode failed, %d\n",
+ i, ret);
+ goto fail;
+ }
+ }
+ }
+
+ ret = regulator_bulk_enable(num, s);
+ if (ret < 0) {
+ DRM_DEV_ERROR(dev, "regulator enable failed, %d\n", ret);
+ goto fail;
+ }
+
+ return 0;
+
+fail:
+ for (i--; i >= 0; i--)
+ regulator_set_load(s[i].consumer, regs[i].disable_load);
+ return ret;
+}
+
+static int dsi_phy_enable_resource(struct msm_dsi_phy *phy)
+{
+ struct device *dev = &phy->pdev->dev;
+ int ret;
+
+ pm_runtime_get_sync(dev);
+
+ ret = clk_prepare_enable(phy->ahb_clk);
+ if (ret) {
+ DRM_DEV_ERROR(dev, "%s: can't enable ahb clk, %d\n", __func__, ret);
+ pm_runtime_put_sync(dev);
+ }
+
+ return ret;
+}
+
+static void dsi_phy_disable_resource(struct msm_dsi_phy *phy)
+{
+ clk_disable_unprepare(phy->ahb_clk);
+ pm_runtime_put(&phy->pdev->dev);
+}
+
+static const struct of_device_id dsi_phy_dt_match[] = {
+#ifdef CONFIG_DRM_MSM_DSI_28NM_PHY
+ { .compatible = "qcom,dsi-phy-28nm-hpm",
+ .data = &dsi_phy_28nm_hpm_cfgs },
+ { .compatible = "qcom,dsi-phy-28nm-hpm-fam-b",
+ .data = &dsi_phy_28nm_hpm_famb_cfgs },
+ { .compatible = "qcom,dsi-phy-28nm-lp",
+ .data = &dsi_phy_28nm_lp_cfgs },
+#endif
+#ifdef CONFIG_DRM_MSM_DSI_20NM_PHY
+ { .compatible = "qcom,dsi-phy-20nm",
+ .data = &dsi_phy_20nm_cfgs },
+#endif
+#ifdef CONFIG_DRM_MSM_DSI_28NM_8960_PHY
+ { .compatible = "qcom,dsi-phy-28nm-8960",
+ .data = &dsi_phy_28nm_8960_cfgs },
+#endif
+#ifdef CONFIG_DRM_MSM_DSI_14NM_PHY
+ { .compatible = "qcom,dsi-phy-14nm",
+ .data = &dsi_phy_14nm_cfgs },
+ { .compatible = "qcom,dsi-phy-14nm-660",
+ .data = &dsi_phy_14nm_660_cfgs },
+ { .compatible = "qcom,dsi-phy-14nm-8953",
+ .data = &dsi_phy_14nm_8953_cfgs },
+#endif
+#ifdef CONFIG_DRM_MSM_DSI_10NM_PHY
+ { .compatible = "qcom,dsi-phy-10nm",
+ .data = &dsi_phy_10nm_cfgs },
+ { .compatible = "qcom,dsi-phy-10nm-8998",
+ .data = &dsi_phy_10nm_8998_cfgs },
+#endif
+#ifdef CONFIG_DRM_MSM_DSI_7NM_PHY
+ { .compatible = "qcom,dsi-phy-7nm",
+ .data = &dsi_phy_7nm_cfgs },
+ { .compatible = "qcom,dsi-phy-7nm-8150",
+ .data = &dsi_phy_7nm_8150_cfgs },
+ { .compatible = "qcom,sc7280-dsi-phy-7nm",
+ .data = &dsi_phy_7nm_7280_cfgs },
+#endif
+ {}
+};
+
+/*
+ * Currently, we only support one SoC for each PHY type. When we have multiple
+ * SoCs for the same PHY, we can try to make the index searching a bit more
+ * clever.
+ */
+static int dsi_phy_get_id(struct msm_dsi_phy *phy)
+{
+ struct platform_device *pdev = phy->pdev;
+ const struct msm_dsi_phy_cfg *cfg = phy->cfg;
+ struct resource *res;
+ int i;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dsi_phy");
+ if (!res)
+ return -EINVAL;
+
+ for (i = 0; i < cfg->num_dsi_phy; i++) {
+ if (cfg->io_start[i] == res->start)
+ return i;
+ }
+
+ return -EINVAL;
+}
+
+static int dsi_phy_driver_probe(struct platform_device *pdev)
+{
+ struct msm_dsi_phy *phy;
+ struct device *dev = &pdev->dev;
+ u32 phy_type;
+ int ret;
+
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy)
+ return -ENOMEM;
+
+ phy->provided_clocks = devm_kzalloc(dev,
+ struct_size(phy->provided_clocks, hws, NUM_PROVIDED_CLKS),
+ GFP_KERNEL);
+ if (!phy->provided_clocks)
+ return -ENOMEM;
+
+ phy->provided_clocks->num = NUM_PROVIDED_CLKS;
+
+ phy->cfg = of_device_get_match_data(&pdev->dev);
+ if (!phy->cfg)
+ return -ENODEV;
+
+ phy->pdev = pdev;
+
+ phy->id = dsi_phy_get_id(phy);
+ if (phy->id < 0) {
+ ret = phy->id;
+ DRM_DEV_ERROR(dev, "%s: couldn't identify PHY index, %d\n",
+ __func__, ret);
+ goto fail;
+ }
+
+ phy->regulator_ldo_mode = of_property_read_bool(dev->of_node,
+ "qcom,dsi-phy-regulator-ldo-mode");
+ if (!of_property_read_u32(dev->of_node, "phy-type", &phy_type))
+ phy->cphy_mode = (phy_type == PHY_TYPE_CPHY);
+
+ phy->base = msm_ioremap_size(pdev, "dsi_phy", &phy->base_size);
+ if (IS_ERR(phy->base)) {
+ DRM_DEV_ERROR(dev, "%s: failed to map phy base\n", __func__);
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ phy->pll_base = msm_ioremap_size(pdev, "dsi_pll", &phy->pll_size);
+ if (IS_ERR(phy->pll_base)) {
+ DRM_DEV_ERROR(&pdev->dev, "%s: failed to map pll base\n", __func__);
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ if (phy->cfg->has_phy_lane) {
+ phy->lane_base = msm_ioremap_size(pdev, "dsi_phy_lane", &phy->lane_size);
+ if (IS_ERR(phy->lane_base)) {
+ DRM_DEV_ERROR(&pdev->dev, "%s: failed to map phy lane base\n", __func__);
+ ret = -ENOMEM;
+ goto fail;
+ }
+ }
+
+ if (phy->cfg->has_phy_regulator) {
+ phy->reg_base = msm_ioremap_size(pdev, "dsi_phy_regulator", &phy->reg_size);
+ if (IS_ERR(phy->reg_base)) {
+ DRM_DEV_ERROR(&pdev->dev, "%s: failed to map phy regulator base\n", __func__);
+ ret = -ENOMEM;
+ goto fail;
+ }
+ }
+
+ if (phy->cfg->ops.parse_dt_properties) {
+ ret = phy->cfg->ops.parse_dt_properties(phy);
+ if (ret)
+ goto fail;
+ }
+
+ ret = dsi_phy_regulator_init(phy);
+ if (ret)
+ goto fail;
+
+ phy->ahb_clk = msm_clk_get(pdev, "iface");
+ if (IS_ERR(phy->ahb_clk)) {
+ DRM_DEV_ERROR(dev, "%s: Unable to get ahb clk\n", __func__);
+ ret = PTR_ERR(phy->ahb_clk);
+ goto fail;
+ }
+
+ /* PLL init will call into clk_register which requires
+ * register access, so we need to enable power and ahb clock.
+ */
+ ret = dsi_phy_enable_resource(phy);
+ if (ret)
+ goto fail;
+
+ if (phy->cfg->ops.pll_init) {
+ ret = phy->cfg->ops.pll_init(phy);
+ if (ret) {
+ DRM_DEV_INFO(dev,
+ "%s: pll init failed: %d, need separate pll clk driver\n",
+ __func__, ret);
+ goto fail;
+ }
+ }
+
+ ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+ phy->provided_clocks);
+ if (ret) {
+ DRM_DEV_ERROR(dev, "%s: failed to register clk provider: %d\n", __func__, ret);
+ goto fail;
+ }
+
+ dsi_phy_disable_resource(phy);
+
+ platform_set_drvdata(pdev, phy);
+
+ return 0;
+
+fail:
+ return ret;
+}
+
+static struct platform_driver dsi_phy_platform_driver = {
+ .probe = dsi_phy_driver_probe,
+ .driver = {
+ .name = "msm_dsi_phy",
+ .of_match_table = dsi_phy_dt_match,
+ },
+};
+
+void __init msm_dsi_phy_driver_register(void)
+{
+ platform_driver_register(&dsi_phy_platform_driver);
+}
+
+void __exit msm_dsi_phy_driver_unregister(void)
+{
+ platform_driver_unregister(&dsi_phy_platform_driver);
+}
+
+int msm_dsi_phy_enable(struct msm_dsi_phy *phy,
+ struct msm_dsi_phy_clk_request *clk_req,
+ struct msm_dsi_phy_shared_timings *shared_timings)
+{
+ struct device *dev;
+ int ret;
+
+ if (!phy || !phy->cfg->ops.enable)
+ return -EINVAL;
+
+ dev = &phy->pdev->dev;
+
+ ret = dsi_phy_enable_resource(phy);
+ if (ret) {
+ DRM_DEV_ERROR(dev, "%s: resource enable failed, %d\n",
+ __func__, ret);
+ goto res_en_fail;
+ }
+
+ ret = dsi_phy_regulator_enable(phy);
+ if (ret) {
+ DRM_DEV_ERROR(dev, "%s: regulator enable failed, %d\n",
+ __func__, ret);
+ goto reg_en_fail;
+ }
+
+ ret = phy->cfg->ops.enable(phy, clk_req);
+ if (ret) {
+ DRM_DEV_ERROR(dev, "%s: phy enable failed, %d\n", __func__, ret);
+ goto phy_en_fail;
+ }
+
+ memcpy(shared_timings, &phy->timing.shared_timings,
+ sizeof(*shared_timings));
+
+ /*
+ * Resetting DSI PHY silently changes its PLL registers to reset status,
+ * which will confuse clock driver and result in wrong output rate of
+ * link clocks. Restore PLL status if its PLL is being used as clock
+ * source.
+ */
+ if (phy->usecase != MSM_DSI_PHY_SLAVE) {
+ ret = msm_dsi_phy_pll_restore_state(phy);
+ if (ret) {
+ DRM_DEV_ERROR(dev, "%s: failed to restore phy state, %d\n",
+ __func__, ret);
+ goto pll_restor_fail;
+ }
+ }
+
+ return 0;
+
+pll_restor_fail:
+ if (phy->cfg->ops.disable)
+ phy->cfg->ops.disable(phy);
+phy_en_fail:
+ dsi_phy_regulator_disable(phy);
+reg_en_fail:
+ dsi_phy_disable_resource(phy);
+res_en_fail:
+ return ret;
+}
+
+void msm_dsi_phy_disable(struct msm_dsi_phy *phy)
+{
+ if (!phy || !phy->cfg->ops.disable)
+ return;
+
+ phy->cfg->ops.disable(phy);
+
+ dsi_phy_regulator_disable(phy);
+ dsi_phy_disable_resource(phy);
+}
+
+void msm_dsi_phy_set_usecase(struct msm_dsi_phy *phy,
+ enum msm_dsi_phy_usecase uc)
+{
+ if (phy)
+ phy->usecase = uc;
+}
+
+/* Returns true if we have to clear DSI_LANE_CTRL.HS_REQ_SEL_PHY */
+bool msm_dsi_phy_set_continuous_clock(struct msm_dsi_phy *phy, bool enable)
+{
+ if (!phy || !phy->cfg->ops.set_continuous_clock)
+ return false;
+
+ return phy->cfg->ops.set_continuous_clock(phy, enable);
+}
+
+void msm_dsi_phy_pll_save_state(struct msm_dsi_phy *phy)
+{
+ if (phy->cfg->ops.save_pll_state) {
+ phy->cfg->ops.save_pll_state(phy);
+ phy->state_saved = true;
+ }
+}
+
+int msm_dsi_phy_pll_restore_state(struct msm_dsi_phy *phy)
+{
+ int ret;
+
+ if (phy->cfg->ops.restore_pll_state && phy->state_saved) {
+ ret = phy->cfg->ops.restore_pll_state(phy);
+ if (ret)
+ return ret;
+
+ phy->state_saved = false;
+ }
+
+ return 0;
+}
+
+void msm_dsi_phy_snapshot(struct msm_disp_state *disp_state, struct msm_dsi_phy *phy)
+{
+ msm_disp_snapshot_add_block(disp_state,
+ phy->base_size, phy->base,
+ "dsi%d_phy", phy->id);
+
+ /* Do not try accessing PLL registers if it is switched off */
+ if (phy->pll_on)
+ msm_disp_snapshot_add_block(disp_state,
+ phy->pll_size, phy->pll_base,
+ "dsi%d_pll", phy->id);
+
+ if (phy->lane_base)
+ msm_disp_snapshot_add_block(disp_state,
+ phy->lane_size, phy->lane_base,
+ "dsi%d_lane", phy->id);
+
+ if (phy->reg_base)
+ msm_disp_snapshot_add_block(disp_state,
+ phy->reg_size, phy->reg_base,
+ "dsi%d_reg", phy->id);
+}
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
index a39de3bdc7fa..56dfa2d24be1 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -347,7 +347,7 @@ int msm_dsi_dphy_timing_calc_v3(struct msm_dsi_dphy_timing *timing,
} else {
timing->shared_timings.clk_pre =
linear_inter(tmax, tmin, pcnt2, 0, false);
- timing->shared_timings.clk_pre_inc_by_2 = 0;
+ timing->shared_timings.clk_pre_inc_by_2 = 0;
}

timing->ta_go = 3;
--
2.25.1
\
 
 \ /
  Last update: 2022-07-07 15:01    [W:2.807 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site