Messages in this thread |  | | Date | Thu, 7 Jul 2022 20:08:01 +0800 | Subject | Re: [PATCH V14 00/15] irqchip: Add LoongArch-related irqchip drivers | From | Hu Zeyuan <> |
| |
Hi,Jianmin, Could you CC the kernel mailing list of loongarch[1] when you submitting patches for LoongArch?
[1]loongarch@lists.linux.dev
Thanks!
在 2022/7/3 16:45, Jianmin Lv 写道: > LoongArch is a new RISC ISA, which is a bit like MIPS or RISC-V. > LoongArch includes a reduced 32-bit version (LA32R), a standard 32-bit > version (LA32S) and a 64-bit version (LA64). LoongArch use ACPI as its > boot protocol LoongArch-specific interrupt controllers (similar to APIC) > are already added in the ACPI Specification 6.5(which may be published in > early June this year and the board is reviewing the draft). > > Currently, LoongArch based processors (e.g. Loongson-3A5000) can only > work together with LS7A chipsets. The irq chips in LoongArch computers > include CPUINTC (CPU Core Interrupt Controller), LIOINTC (Legacy I/O > Interrupt Controller), EIOINTC (Extended I/O Interrupt Controller), > HTVECINTC (Hyper-Transport Vector Interrupt Controller), PCH-PIC (Main > Interrupt Controller in LS7A chipset), PCH-LPC (LPC Interrupt Controller > in LS7A chipset) and PCH-MSI (MSI Interrupt Controller). > > CPUINTC is a per-core controller (in CPU), LIOINTC/EIOINTC/HTVECINTC are > per-package controllers (in CPU), while PCH-PIC/PCH-LPC/PCH-MSI are all > controllers out of CPU (i.e., in chipsets). These controllers (in other > words, irqchips) are linked in a hierarchy, and there are two models of > hierarchy (legacy model and extended model). > > Legacy IRQ model: > > In this model, the IPI (Inter-Processor Interrupt) and CPU Local Timer > interrupt go to CPUINTC directly, CPU UARTS interrupts go to LIOINTC, > while all other devices interrupts go to PCH-PIC/PCH-LPC/PCH-MSI and > gathered by HTVECINTC, and then go to LIOINTC, and then CPUINTC. > > +---------------------------------------------+ > | | > | +-----+ +---------+ +-------+ | > | | IPI | --> | CPUINTC | <-- | Timer | | > | +-----+ +---------+ +-------+ | > | ^ | > | | | > | +---------+ +-------+ | > | | LIOINTC | <-- | UARTs | | > | +---------+ +-------+ | > | ^ | > | | | > | +-----------+ | > | | HTVECINTC | | > | +-----------+ | > | ^ ^ | > | | | | > | +---------+ +---------+ | > | | PCH-PIC | | PCH-MSI | | > | +---------+ +---------+ | > | ^ ^ ^ | > | | | | | > | +---------+ +---------+ +---------+ | > | | PCH-LPC | | Devices | | Devices | | > | +---------+ +---------+ +---------+ | > | ^ | > | | | > | +---------+ | > | | Devices | | > | +---------+ | > | | > | | > +---------------------------------------------+ > > Extended IRQ model: > > In this model, the IPI (Inter-Processor Interrupt) and CPU Local Timer > interrupt go to CPUINTC directly, CPU UARTS interrupts go to LIOINTC, > while all other devices interrupts go to PCH-PIC/PCH-LPC/PCH-MSI and > gathered by EIOINTC, and then go to to CPUINTC directly. > > +--------------------------------------------------------+ > | | > | +-----+ +---------+ +-------+ | > | | IPI | --> | CPUINTC | <-- | Timer | | > | +-----+ +---------+ +-------+ | > | ^ ^ | > | | | | > | +---------+ +---------+ +-------+ | > | | EIOINTC | | LIOINTC | <-- | UARTs | | > | +---------+ +---------+ +-------+ | > | ^ ^ | > | | | | > | +---------+ +---------+ | > | | PCH-PIC | | PCH-MSI | | > | +---------+ +---------+ | > | ^ ^ ^ | > | | | | | > | +---------+ +---------+ +---------+ | > | | PCH-LPC | | Devices | | Devices | | > | +---------+ +---------+ +---------+ | > | ^ | > | | | > | +---------+ | > | | Devices | | > | +---------+ | > | | > | | > +--------------------------------------------------------+ > > The hierarchy model is constructed by parsing irq contronler structures > in MADT. Some controllers((e.g. LIOINTC, HTVECINTC, EIOINTC and PCH-LPC) > are hardcodingly connected to their parents, so their irqdomins are > separately routed to their parents in a fixed way. Some controllers > (e.g. PCH-PIC and PCH-MSI) could be routed to different parents for different > CPU. The firmware will config EIOINTC for the newer CPU and config HTVECINTC > for old CPU in MADT. By this way, PCH-PIC and PCH-MSI irqdomain can only be > routed one parent irqdomin: HTVECINTC or EIOINTC. > > > Example of irqchip topology in a system with two chipsets: > > +------------------------------------------------------------+ > | | > | +------------------+ | > | | CPUINTC | | > | +------------------+ | > | ^ ^ | > | | | | > | +----------+ +----------+ | > | | EIOINTC 0| | EIOINTC 1| | > | +----------+ +----------+ | > | ^ ^ ^ ^ | > | | | | | | > | +----------+ +----------+ +----------+ +----------+ | > | | PCH-PIC 0| | PCH-MSI 0| | PCH-PIC 1| | PCH-MSI 1| | > | +----------+ +----------+ +----------+ +----------+ | > | | > | | > +------------------------------------------------------------+ > > For systems with two chipsets, there are tow group(consists of EIOINTC, PCH-PIC and PCH-MSI) irqdomains, > and each group has same node id. So we defined a structure to mantain the relation of node and it's parent irqdomain. > > struct acpi_vector_group { > int node; > int pci_segment; > struct irq_domain *parent; > }; > > The initialization and use of acpi_vector_group array are following: > > 1 Entry of struct acpi_vector_group array initialization: > > By parsing MCFG, the node id(from bit44-47 of Base Address)and pci segment are extracted. And from MADT, we have the node id of each EIOINTC. > > entry.node = node id of pci segment > entry.pci_segment = pci segment (only for msi irqdomain) > > By matching node id of entry and EIOINTC to set parent. > > entry.parent = EIOINTC irqdomain(node id of EIOINTC == node id of pci segment) > > 2 Get parent irqdomain for PCH-PIC: > >>From MADT, we have the node id of each PCH-PIC(from bit44-47 of Base Address). > if (node of entry i == node of PCH-PIC) > return entrys[i].parent; > > 3 Get parent irqdomain for PCH-MSI of pci segment: > > return entrys[i].parent; (i is the index of msi irqdomain) > > 4 How to select a correct irqdomain to map irq for a device? > For devices using legacy irq behind PCH-PIC, GSI is used to select correct PCH-PIC irqdomain. > For devices using msi irq behind PCH-MSI, the pci segmen of the device is used to select correct PCH-MSI irqdomain. > > V1 -> V2: > 1, Remove queued patches; > 2, Move common logic of DT/ACPI probing to common functions; > 3, Split .suspend()/.resume() functions to separate patches. > > V2 -> V3: > 1, Fix a bug for loongson-pch-pic probe; > 2, Some minor improvements for LPC controller. > > V3 -> V4: > 1, Rework the CPU interrupt controller driver; > 2, Some minor improvements for other controllers. > > V4 -> V5: > 1, Add a description of LoonArch's IRQ model; > 2, Support multiple EIOINTCs in one system; > 3, Some minor improvements for other controllers. > > V5 -> V6: > 1, Attach a fwnode to CPUINTC irq domain; > 2, Use raw spinlock instead of generic spinlock; > 3, Improve the method of restoring EIOINTC state; > 4, Update documentation, comments and commit messages. > > V6 -> V7: > 1, Fix build warnings reported by kernel test robot. > > V7 -> V8: > 1, Add arguments sanity checking for irqchip init functions; > 2, Support Loongson-3C5000 (One NUMA Node includes 4 EIOINTC Node). > > V8 -> V9: > 1, Rebase on 5.17-rc5; > 2, Update cover letter; > 3, Some small improvements. > > V9 -> V10: > 1, Rebase on 5.17-rc6; > 2, Fix build warnings reported by kernel test robot. > > V10 -> V11: > 1, Rebase on 5.18-rc4; > 2, Fix irq affinity setting for EIOINTC; > 3, Fix hwirq allocation failure for EIOINTC. > > V11 -> RFC: > 1, Refactored the way to build irqchip hierarchy topology. > > RFC -> RFC V2: > 1, Move all IO-interrupt related code to driver/irqchip from arch directory. > 2. Add description for an example of two chipsets system. > > RFC V2 -> RFC V3: > 1, Add support for multiple GSI domains > 2, Use ACPI_GENERIC_GSI for GSI handling > 3, Drop suspend-resume stuff > 4, Export fwnode handles instead of irq domain handles > > RFC V3 -> V12: > 1, Address patch attributions of the patch series > > V12 -> V13 > 1 Based on 5.19-rc2 > 2 Remove arch specified gsi code > 3 Split some 'common' code into the various drivers where they belong. > 4 Allow acpi_gsi_to_irq() to have an arch-specific fallback > > V13 -> V14 > 1 Add LoongArch-specified APICs definition > 2 Use the way in CPUINTC driver to call pch-pic and pch-msi entry > 3 Fix compiling and regression issue for OF path > > Huacai Chen (8): > ACPICA: MADT: Add LoongArch APICs support > irqchip: Add Loongson PCH LPC controller support > irqchip/loongson-pch-pic: Add ACPI init support > irqchip/loongson-pch-msi: Add ACPI init support > irqchip/loongson-htvec: Add ACPI init support > irqchip/loongson-liointc: Add ACPI init support > irqchip: Add Loongson Extended I/O interrupt controller support > irqchip: Add LoongArch CPU interrupt controller support > > Jianmin Lv (5): > genirq/generic_chip: export irq_unmap_generic_chip > LoongArch: Use ACPI_GENERIC_GSI for gsi handling > LoongArch: prepare to support multiple pch-pic and pch-msi irqdomain > irqchip / ACPI: Introduce ACPI_IRQ_MODEL_LPIC for LoongArch > LoongArch: Fix irq number for timer and ipi > > Marc Zyngier (2): > APCI: irq: Add support for multiple GSI domains > ACPI: irq: Allow acpi_gsi_to_irq() to have an arch-specific fallback > > arch/loongarch/Kconfig | 1 + > arch/loongarch/include/asm/irq.h | 42 ++- > arch/loongarch/kernel/acpi.c | 65 ----- > arch/loongarch/kernel/irq.c | 45 ++- > arch/loongarch/kernel/time.c | 2 +- > arch/mips/include/asm/mach-loongson64/irq.h | 2 +- > drivers/acpi/bus.c | 3 + > drivers/acpi/irq.c | 58 ++-- > drivers/irqchip/Kconfig | 28 ++ > drivers/irqchip/Makefile | 3 + > drivers/irqchip/irq-gic-v3.c | 18 +- > drivers/irqchip/irq-gic.c | 18 +- > drivers/irqchip/irq-loongarch-cpu.c | 169 ++++++++++++ > drivers/irqchip/irq-loongson-eiointc.c | 413 ++++++++++++++++++++++++++++ > drivers/irqchip/irq-loongson-htvec.c | 145 +++++++--- > drivers/irqchip/irq-loongson-liointc.c | 227 ++++++++++----- > drivers/irqchip/irq-loongson-pch-lpc.c | 207 ++++++++++++++ > drivers/irqchip/irq-loongson-pch-msi.c | 131 ++++++--- > drivers/irqchip/irq-loongson-pch-pic.c | 177 +++++++++--- > include/acpi/actbl2.h | 127 ++++++++- > include/linux/acpi.h | 4 +- > include/linux/cpuhotplug.h | 1 + > include/linux/irq.h | 1 + > kernel/irq/generic-chip.c | 2 +- > 24 files changed, 1578 insertions(+), 311 deletions(-) > create mode 100644 drivers/irqchip/irq-loongarch-cpu.c > create mode 100644 drivers/irqchip/irq-loongson-eiointc.c > create mode 100644 drivers/irqchip/irq-loongson-pch-lpc.c >
|  |