lkml.org 
[lkml]   [2022]   [Jul]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH 3/4] clk: Add consumers count information to debugfs
Date
Lets add consumers count information to debugfs. It could be useful for
identifying which clocks do not have a consumer but are enabled at boot
and should be disabled since they are unused. Also you could tell which
clocks are marked as critical since they do not have consumers, but
their enable_count is non-zero.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
drivers/clk/clk.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 9b54afd2fee8..e412e83a6e28 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -2955,9 +2955,9 @@ static void clk_summary_show_one(struct seq_file *s, struct clk_core *c,
{
int phase;

- seq_printf(s, "%*s%-*s %7d %8d %8d %11lu %10lu ",
+ seq_printf(s, "%*s%-*s %7d %7d %8d %8d %11lu %10lu ",
level * 3 + 1, "",
- 30 - level * 3, c->name,
+ 30 - level * 3, c->name, c->consumers_count,
c->enable_count, c->prepare_count, c->protect_count,
clk_core_get_rate_recalc(c),
clk_core_get_accuracy_recalc(c));
@@ -2996,9 +2996,9 @@ static int clk_summary_show(struct seq_file *s, void *data)
struct clk_core *c;
struct hlist_head **lists = (struct hlist_head **)s->private;

- seq_puts(s, " enable prepare protect duty hardware\n");
- seq_puts(s, " clock count count count rate accuracy phase cycle enable\n");
- seq_puts(s, "-------------------------------------------------------------------------------------------------------\n");
+ seq_puts(s, " counsumers enable prepare protect duty hardware\n");
+ seq_puts(s, " clock count count count count rate accuracy phase cycle enable\n");
+ seq_puts(s, "-------------------------------------------------------------------------------------------------------------------\n");

clk_prepare_lock();

@@ -3021,6 +3021,7 @@ static void clk_dump_one(struct seq_file *s, struct clk_core *c, int level)

/* This should be JSON format, i.e. elements separated with a comma */
seq_printf(s, "\"%s\": { ", c->name);
+ seq_printf(s, "\"consumers_count\": %d,", c->consumers_count);
seq_printf(s, "\"enable_count\": %d,", c->enable_count);
seq_printf(s, "\"prepare_count\": %d,", c->prepare_count);
seq_printf(s, "\"protect_count\": %d,", c->protect_count);
@@ -3330,6 +3331,7 @@ static void clk_debug_create_one(struct clk_core *core, struct dentry *pdentry)
debugfs_create_u32("clk_phase", 0444, root, &core->phase);
debugfs_create_file("clk_flags", 0444, root, core, &clk_flags_fops);
debugfs_create_u32("clk_prepare_count", 0444, root, &core->prepare_count);
+ debugfs_create_u32("clk_consumers_count", 0444, root, &core->consumers_count);
debugfs_create_u32("clk_enable_count", 0444, root, &core->enable_count);
debugfs_create_u32("clk_protect_count", 0444, root, &core->protect_count);
debugfs_create_u32("clk_notifier_count", 0444, root, &core->notifier_count);
--
2.34.3
\
 
 \ /
  Last update: 2022-07-07 12:04    [W:0.872 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site