Messages in this thread | | | Date | Thu, 7 Jul 2022 11:43:38 +0300 | Subject | Re: [PATCH V4] arm64: dts: imx8mp: add NoC node | From | Georgi Djakov <> |
| |
On 7.07.22 2:47, Peng Fan (OSS) wrote: > From: Peng Fan <peng.fan@nxp.com> > > Add i.MX8MP NoC node to make the interconnect i.MX8MP driver could work. > Currently dynamic frequency scaling of the i.MX8MP NoC has not been > supported, only NoC initial settings are configured by interconnect > driver. > > Signed-off-by: Peng Fan <peng.fan@nxp.com>
Looks good to me.
Acked-by: Georgi Djakov <djakov@kernel.org>
> --- > > V4: > Georgi has merged the V3 driver and bindings patches. So only resend > this patch. Per Georgi's comments: > - Drop syscon from compatbile > - Drop the header inclusion > > Seems I not see this patch in patchwork or mailist, maybe sent failed. > So gave a resend of V4. > > V3: > https://lore.kernel.org/linux-arm-kernel/20220703091132.1412063-1-peng.fan@oss.nxp.com/ > > I not list the full change log, since this is only a minor patch > > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 21 +++++++++++++++++++++ > 1 file changed, 21 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > index eb2d516278eb..42ed8ee08548 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > @@ -1019,6 +1019,27 @@ eqos: ethernet@30bf0000 { > }; > }; > > + noc: interconnect@32700000 { > + compatible = "fsl,imx8mp-noc", "fsl,imx8m-noc"; > + reg = <0x32700000 0x100000>; > + clocks = <&clk IMX8MP_CLK_NOC>; > + #interconnect-cells = <1>; > + > + operating-points-v2 = <&noc_opp_table>; > + > + noc_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-200M { > + opp-hz = /bits/ 64 <200000000>; > + }; > + > + opp-1000M { > + opp-hz = /bits/ 64 <1000000000>; > + }; > + }; > + }; > + > aips4: bus@32c00000 { > compatible = "fsl,aips-bus", "simple-bus"; > reg = <0x32c00000 0x400000>;
| |