lkml.org 
[lkml]   [2022]   [Jul]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 3/3] RTC: nuvoton: Add NCT3018Y real time clock driver
On 07/07/2022 15:17:28+0800, Mining Lin wrote:
> Dear Alexandre,
>
> Thank you for your comments.
> I will refine and reply below.
>
> Thanks.
> Best Regards,
> Mia
>
> Medad Young <medadyoung@gmail.com> 於 2022年7月7日 週四 下午1:31寫道:
> >
> > Hello Alexandre,
> >
> > Thanks for your comments.
> > I add Mining Lin <mimi05633@gmail.com> into this mail thread,
> > and she is going to follow up this RTC driver.
> > She will be in charge of maintaining this driver.
> >
> > Alexandre Belloni <alexandre.belloni@bootlin.com> 於 2022年6月25日 週六 凌晨4:26寫道:
> > >
> > > Hello,
> > >
> > > Please run ./scripts/checkpatch.pl --strict on your patch, there are a
> > > bunch of issues.
> > >
> [Mia] I will run ./scripts/checkpatch.pl --strict on my patch to fix issues.
>
> > > On 27/05/2022 16:46:47+0800, medadyoung@gmail.com wrote:
> > > > +static int nct3018y_set_alarm_mode(struct i2c_client *client, bool on)
> > > > +{
> > > > + int err, flags;
> > > > +
> > > > + dev_dbg(&client->dev, "%s:on:%d\n", __func__, on);
> > > > +
> > > > + flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_CTRL);
> > > > + if (flags < 0) {
> > > > + dev_err(&client->dev,
> > > > + "Failed to read NCT3018Y_REG_CTRL\n");
> > >
> > > You should cut down on the number of error messages, they are usually
> > > not useful as the user doesn't have any specific action after getting
> > > one of them apart from trying the action once again. Also, this will
> > > make your code shorter. dev_dbg is fine.
> > >
> [Mia] I will modify dev_err to dev_dbg if there is an error and nothing to do.
>
> > > > +/*
> > > > + * In the routines that deal directly with the nct3018y hardware, we use
> > > > + * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
> > > > + */
> > > > +static int nct3018y_rtc_read_time(struct device *dev, struct rtc_time *tm)
> > > > +{
> > > > + struct i2c_client *client = to_i2c_client(dev);
> > > > + unsigned char buf[10];
> > > > + int err;
> > > > +
> > >
> > > You should still return an error if the time is invalid there but without
> > > an error message.
> > >
> [Mia] I will verify the time by rtc_valid_tm(tm).
>

No, I meant checking NCT3018Y_REG_ST as was done in the previous
revisions of the series

> > > > +static struct clk *nct3018y_clkout_register_clk(struct nct3018y *nct3018y)
> > > > +{
> > > > + struct i2c_client *client = nct3018y->client;
> > > > + struct device_node *node = client->dev.of_node;
> > > > + struct clk *clk;
> > > > + struct clk_init_data init;
> > > > + int flags, err;
> > > > +
> > > > + /* disable the clkout output */
> > > > + flags = 0;
> > > > + err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_CLKO, flags);
> > >
> > > BTW, this introduces a glitch in the clock output if the clock is
> > > actually used. Maybe you could just rely on the CCF core to disable this
> > > clock when there are no users.
> > >
> [Mia] Do you mean there is no need to disable the clock output here?
>

The CCF will disable the clock at boot time if there are no users

--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2022-07-07 09:54    [W:0.083 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site