lkml.org 
[lkml]   [2022]   [Jul]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v7 2/3] dt-bindings: mfd: atmel,sama5d2-flexcom: Add new compatible string for lan966x
Date
> > @@ -18,9 +18,11 @@ properties:
> > compatible:
> > enum:
> > - atmel,sama5d2-flexcom
> > + - microchip,lan966x-flexcom
>
> Don't use wildcards in compatible strings.
>
Ok. I will change it.
> >
> > reg:
> > - maxItems: 1
> > + minItems: 1
> > + maxItems: 2
> >
> > clocks:
> > maxItems: 1
> > @@ -47,6 +49,27 @@ properties:
> > $ref: /schemas/types.yaml#/definitions/uint32
> > enum: [1, 2, 3]
> >
> > + microchip,flx-shrd-pins:
> > + description: Specify the Flexcom shared pins to be used for flexcom
> > + chip-selects.
> > + $ref: /schemas/types.yaml#/definitions/uint32-array
> > + minItems: 1
> > + maxItems: 2
> > + items:
> > + minimum: 0
> > + maximum: 20
>
> It's not clear how one uses this. It's selecting 2 pins, or a range of
> pins, or ???
>
I used minItems and maxItems to represent number of entries allowed. Either one shared pin
can be mapped or max of 2 based on pins mapped on board and 0-20 is allowed shared pin numbers.

> > +
> > + microchip,flx-cs:
> > + description: Flexcom chip selects. Here, value of '0' represents "cts" line
> > + of flexcom USART or "cs0" line of flexcom SPI and value of '1'
> represents
> > + "rts" line of flexcom USART or "cs1" line of flexcom SPI.
> > + $ref: /schemas/types.yaml#/definitions/uint32-array
> > + minItems: 1
> > + maxItems: 2
> > + items:
> > + minimum: 0
> > + maximum: 1
> > +
> > required:
> > - compatible
> > - reg
> > @@ -56,6 +79,31 @@ required:
> > - ranges
> > - atmel,flexcom-mode
> >
> > +allOf:
> > + - if:
> > + properties:
> > + compatible:
> > + contains:
> > + const: microchip,lan966x-flexcom
> > +
> > + then:
> > + properties:
> > + reg:
> > + items:
> > + - description: Flexcom base registers map
> > + - description: Flexcom shared registers map
> > + required:
> > + - microchip,flx-shrd-pins
> > + - microchip,flx-cs
> > +
> > + else:
> > + properties:
> > + reg:
> > + items:
> > + - description: Flexcom base registers map
> > + microchip,flx-shrd-pins: false
> > + microchip,flx-cs: false
> > +
> > additionalProperties: false
> >
> > examples:
> > @@ -71,4 +119,19 @@ examples:
> > ranges = <0x0 0xf8034000 0x800>;
> > atmel,flexcom-mode = <2>;
> > };
> > + - |
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > + flx3: flexcom@e0064000 {
> > + compatible = "microchip,lan966x-flexcom";
> > + reg = <0xe0064000 0x100>,
> > + <0xe2004180 0x8>;
> > + clocks = <&flx0_clk>;
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges = <0x0 0xe0040000 0x800>;
> > + atmel,flexcom-mode = <2>;
> > + microchip,flx-shrd-pins = <9>;
> > + microchip,flx-cs = <0>;
> > + };
> > ...
> > --
> > 2.25.1
> >
> >

\
 
 \ /
  Last update: 2022-07-07 09:41    [W:0.059 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site