lkml.org 
[lkml]   [2022]   [Jul]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[tip: x86/sgx] selftests/sgx: Test reclaiming of untouched page
The following commit has been merged into the x86/sgx branch of tip:

Commit-ID: 08ceab2c37d32f422f8d98540656ee5a416ba729
Gitweb: https://git.kernel.org/tip/08ceab2c37d32f422f8d98540656ee5a416ba729
Author: Reinette Chatre <reinette.chatre@intel.com>
AuthorDate: Tue, 10 May 2022 11:09:06 -07:00
Committer: Dave Hansen <dave.hansen@linux.intel.com>
CommitterDate: Thu, 07 Jul 2022 10:13:05 -07:00

selftests/sgx: Test reclaiming of untouched page

Removing a page from an initialized enclave involves three steps:
(1) the user requests changing the page type to PT_TRIM via the
SGX_IOC_ENCLAVE_MODIFY_TYPES ioctl()
(2) on success the ENCLU[EACCEPT] instruction is run from within
the enclave to accept the page removal
(3) the user initiates the actual removal of the page via the
SGX_IOC_ENCLAVE_REMOVE_PAGES ioctl().

Remove a page that has never been accessed. This means that when the
first ioctl() requesting page removal arrives, there will be no page
table entry, yet a valid page table entry needs to exist for the
ENCLU[EACCEPT] function to succeed. In this test it is verified that
a page table entry can still be installed for a page that is in the
process of being removed.

Suggested-by: Haitao Huang <haitao.huang@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/45e1b2a2fcd8c14597d04e40af5d8a9c1c5b017e.1652137848.git.reinette.chatre@intel.com
---
tools/testing/selftests/sgx/main.c | 80 +++++++++++++++++++++++++++++-
1 file changed, 80 insertions(+)

diff --git a/tools/testing/selftests/sgx/main.c b/tools/testing/selftests/sgx/main.c
index 2c69045..ba16671 100644
--- a/tools/testing/selftests/sgx/main.c
+++ b/tools/testing/selftests/sgx/main.c
@@ -1790,4 +1790,84 @@ TEST_F(enclave, remove_added_page_invalid_access_after_eaccept)
EXPECT_EQ(self->run.exception_addr, data_start);
}

+TEST_F(enclave, remove_untouched_page)
+{
+ struct sgx_enclave_remove_pages remove_ioc;
+ struct sgx_enclave_modify_types modt_ioc;
+ struct encl_op_eaccept eaccept_op;
+ unsigned long data_start;
+ int ret, errno_save;
+
+ ASSERT_TRUE(setup_test_encl(ENCL_HEAP_SIZE_DEFAULT, &self->encl, _metadata));
+
+ /*
+ * Hardware (SGX2) and kernel support is needed for this test. Start
+ * with check that test has a chance of succeeding.
+ */
+ memset(&modt_ioc, 0, sizeof(modt_ioc));
+ ret = ioctl(self->encl.fd, SGX_IOC_ENCLAVE_MODIFY_TYPES, &modt_ioc);
+
+ if (ret == -1) {
+ if (errno == ENOTTY)
+ SKIP(return,
+ "Kernel does not support SGX_IOC_ENCLAVE_MODIFY_TYPES ioctl()");
+ else if (errno == ENODEV)
+ SKIP(return, "System does not support SGX2");
+ }
+
+ /*
+ * Invalid parameters were provided during sanity check,
+ * expect command to fail.
+ */
+ EXPECT_EQ(ret, -1);
+
+ /* SGX2 is supported by kernel and hardware, test can proceed. */
+ memset(&self->run, 0, sizeof(self->run));
+ self->run.tcs = self->encl.encl_base;
+
+ data_start = self->encl.encl_base +
+ encl_get_data_offset(&self->encl) + PAGE_SIZE;
+
+ memset(&modt_ioc, 0, sizeof(modt_ioc));
+
+ modt_ioc.offset = encl_get_data_offset(&self->encl) + PAGE_SIZE;
+ modt_ioc.length = PAGE_SIZE;
+ modt_ioc.page_type = SGX_PAGE_TYPE_TRIM;
+ ret = ioctl(self->encl.fd, SGX_IOC_ENCLAVE_MODIFY_TYPES, &modt_ioc);
+ errno_save = ret == -1 ? errno : 0;
+
+ EXPECT_EQ(ret, 0);
+ EXPECT_EQ(errno_save, 0);
+ EXPECT_EQ(modt_ioc.result, 0);
+ EXPECT_EQ(modt_ioc.count, 4096);
+
+ /*
+ * Enter enclave via TCS #1 and approve page removal by sending
+ * EACCEPT for removed page.
+ */
+
+ eaccept_op.epc_addr = data_start;
+ eaccept_op.flags = SGX_SECINFO_TRIM | SGX_SECINFO_MODIFIED;
+ eaccept_op.ret = 0;
+ eaccept_op.header.type = ENCL_OP_EACCEPT;
+
+ EXPECT_EQ(ENCL_CALL(&eaccept_op, &self->run, true), 0);
+ EXPECT_EEXIT(&self->run);
+ EXPECT_EQ(self->run.exception_vector, 0);
+ EXPECT_EQ(self->run.exception_error_code, 0);
+ EXPECT_EQ(self->run.exception_addr, 0);
+ EXPECT_EQ(eaccept_op.ret, 0);
+
+ memset(&remove_ioc, 0, sizeof(remove_ioc));
+
+ remove_ioc.offset = encl_get_data_offset(&self->encl) + PAGE_SIZE;
+ remove_ioc.length = PAGE_SIZE;
+ ret = ioctl(self->encl.fd, SGX_IOC_ENCLAVE_REMOVE_PAGES, &remove_ioc);
+ errno_save = ret == -1 ? errno : 0;
+
+ EXPECT_EQ(ret, 0);
+ EXPECT_EQ(errno_save, 0);
+ EXPECT_EQ(remove_ioc.count, 4096);
+}
+
TEST_HARNESS_MAIN
\
 
 \ /
  Last update: 2022-07-07 20:29    [W:0.618 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site