lkml.org 
[lkml]   [2022]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 04/13] ARM: dts: qcom: disable smb208 regulators for ipq8064-rb3011
From


On 6.07.2022 14:56, Christian Marangi wrote:
> On Wed, Jul 06, 2022 at 03:03:32PM +0200, Konrad Dybcio wrote:
>>
>>
>> On 5.07.2022 15:39, Christian Marangi wrote:
>>> Mikrotik RB3011 have a special configuration where the regulators are
>>> not the common smb208 controlled by RPM but they use a TPS563900
>>> controlled via i2c. Disable the smb208 for this specific device.
>> Ok, so that answers my question from the previous email.
>> Please define the SMB208 regulators only in the DTs of
>> boards that actually use it, as it is not a SoC component as
>> far as I can tell.
>>
>> Konrad
>
> This was already discuessed,
Yeah sorry, I didn't notice earlier and started reviewing patches
that were already reviewed by others.


rb3011 is the exception, qcom for ipq8064
> recommends to use smb208 but gives the option to implement it in their
> own way. So again we have 28 device with smb208 and 1 device that use
> its own special way...
>
> Wonder if a separate dtsi can be used for this if we really can't put
> smb208 in ipq8064 dtsi?
There's msm8916-pm8916.dtsi. You can follow.

Konrad

[...]

\
 
 \ /
  Last update: 2022-07-06 15:33    [W:0.236 / U:0.968 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site