lkml.org 
[lkml]   [2022]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 03/13] ARM: dts: qcom: add missing rpm regulators and cells for ipq8064
From


On 5.07.2022 15:39, Christian Marangi wrote:
> Add cells definition for rpm node and add missing regulators for the 4
> regulator present on ipq8064. There regulators are controlled by rpm and
> to correctly works gsbi4_i2c require to be NEVER disabled or rpm will
> reject any regulator change request.
That sounds.. very weird for a RPM regulator..


>
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> Tested-by: Jonathan McDowell <noodles@earth.li>
> ---
> arch/arm/boot/dts/qcom-ipq8064.dtsi | 36 +++++++++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> index 1b4b72723ead..c0b05d2a2d6d 100644
> --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
> +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> @@ -844,10 +844,46 @@ rpm: rpm@108000 {
> clocks = <&gcc RPM_MSG_RAM_H_CLK>;
> clock-names = "ram";
>
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> rpmcc: clock-controller {
> compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
> #clock-cells = <1>;
> };
> +
> + smb208_regulators: regulators {
Are you sure it is used on all ipq8064 boards? And with the same
voltage settings?

> + compatible = "qcom,rpm-smb208-regulators";
> + status = "okay";
They are enabled by default, as you are defining them here and
the status property is not overwritten anywhere else.

Konrad
> +
> + smb208_s1a: s1a {
> + regulator-min-microvolt = <1050000>;
> + regulator-max-microvolt = <1150000>;
> +
> + qcom,switch-mode-frequency = <1200000>;
> + };
> +
> + smb208_s1b: s1b {
> + regulator-min-microvolt = <1050000>;
> + regulator-max-microvolt = <1150000>;
> +
> + qcom,switch-mode-frequency = <1200000>;
> + };
> +
> + smb208_s2a: s2a {
> + regulator-min-microvolt = < 800000>;
> + regulator-max-microvolt = <1250000>;
> +
> + qcom,switch-mode-frequency = <1200000>;
> + };
> +
> + smb208_s2b: s2b {
> + regulator-min-microvolt = < 800000>;
> + regulator-max-microvolt = <1250000>;
> +
> + qcom,switch-mode-frequency = <1200000>;
> + };
> + };
> };
>
> tcsr: syscon@1a400000 {

\
 
 \ /
  Last update: 2022-07-06 15:03    [W:0.295 / U:0.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site