lkml.org 
[lkml]   [2022]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v4 2/2] dt-bindings: mfd: da9062 can be a system power controller
The DA9062 can be used to power off a system if it is appropriately
wired.

Signed-off-by: Helmut Grohne <helmut.grohne@intenta.de>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/mfd/da9062.txt | 1 +
1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt
index bab0d0e66cb3..4861c3ad97e9 100644
--- a/Documentation/devicetree/bindings/mfd/da9062.txt
+++ b/Documentation/devicetree/bindings/mfd/da9062.txt
@@ -41,6 +41,7 @@ further information on IRQ bindings.

Optional properties:

+- system-power-controller
- gpio-controller : Marks the device as a gpio controller.
- #gpio-cells : Should be two. The first cell is the pin number and the
second cell is used to specify the gpio polarity.
--
2.30.2
Dipl.-Inf. Helmut Grohne
Research and Development
Application Engineering

Phone: +49 (371) 24354 0 ∙ Fax: +49 (371) 24354 020
helmut.grohne@intenta.de ∙ https://www.intenta.de

Intenta GmbH ∙ Ahornstraße 55 ∙ 09112 Chemnitz, Germany
Managing Director: Dr.-Ing. Basel Fardi ∙ VAT/USt-IdNr.: DE 275745394
Commercial register: HRB 26404 Amtsgericht Chemnitz

\
 
 \ /
  Last update: 2022-07-06 14:33    [W:0.044 / U:0.904 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site