lkml.org 
[lkml]   [2022]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 09/13] iio: adc: axp20x_adc: Add support for AXP192
Date
The AXP192 is identical to the AXP20x, except for the addition of
two more GPIO ADC channels.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
---
drivers/iio/adc/axp20x_adc.c | 279 +++++++++++++++++++++++++++++++++++
1 file changed, 279 insertions(+)

diff --git a/drivers/iio/adc/axp20x_adc.c b/drivers/iio/adc/axp20x_adc.c
index 75bda94dbce1..8d748b814f20 100644
--- a/drivers/iio/adc/axp20x_adc.c
+++ b/drivers/iio/adc/axp20x_adc.c
@@ -22,11 +22,19 @@
#include <linux/iio/machine.h>
#include <linux/mfd/axp20x.h>

+#define AXP192_ADC_EN1_MASK GENMASK(7, 0)
+#define AXP192_ADC_EN2_MASK (GENMASK(3, 0) | BIT(7))
+
#define AXP20X_ADC_EN1_MASK GENMASK(7, 0)
#define AXP20X_ADC_EN2_MASK (GENMASK(3, 2) | BIT(7))

#define AXP22X_ADC_EN1_MASK (GENMASK(7, 5) | BIT(0))

+#define AXP192_GPIO30_IN_RANGE_GPIO0 BIT(0)
+#define AXP192_GPIO30_IN_RANGE_GPIO1 BIT(1)
+#define AXP192_GPIO30_IN_RANGE_GPIO2 BIT(2)
+#define AXP192_GPIO30_IN_RANGE_GPIO3 BIT(3)
+
#define AXP20X_GPIO10_IN_RANGE_GPIO0 BIT(0)
#define AXP20X_GPIO10_IN_RANGE_GPIO1 BIT(1)

@@ -71,6 +79,25 @@ struct axp20x_adc_iio {
const struct axp_data *data;
};

+enum axp192_adc_channel_v {
+ AXP192_ACIN_V = 0,
+ AXP192_VBUS_V,
+ AXP192_TS_IN,
+ AXP192_GPIO0_V,
+ AXP192_GPIO1_V,
+ AXP192_GPIO2_V,
+ AXP192_GPIO3_V,
+ AXP192_IPSOUT_V,
+ AXP192_BATT_V,
+};
+
+enum axp192_adc_channel_i {
+ AXP192_ACIN_I = 0,
+ AXP192_VBUS_I,
+ AXP192_BATT_CHRG_I,
+ AXP192_BATT_DISCHRG_I,
+};
+
enum axp20x_adc_channel_v {
AXP20X_ACIN_V = 0,
AXP20X_VBUS_V,
@@ -158,6 +185,43 @@ static struct iio_map axp22x_maps[] = {
* The only exception is for the battery. batt_v will be in_voltage6_raw and
* charge current in_current6_raw and discharge current will be in_current7_raw.
*/
+static const struct iio_chan_spec axp192_adc_channels[] = {
+ AXP20X_ADC_CHANNEL(AXP192_ACIN_V, "acin_v", IIO_VOLTAGE,
+ AXP20X_ACIN_V_ADC_H),
+ AXP20X_ADC_CHANNEL(AXP192_ACIN_I, "acin_i", IIO_CURRENT,
+ AXP20X_ACIN_I_ADC_H),
+ AXP20X_ADC_CHANNEL(AXP192_VBUS_V, "vbus_v", IIO_VOLTAGE,
+ AXP20X_VBUS_V_ADC_H),
+ AXP20X_ADC_CHANNEL(AXP192_VBUS_I, "vbus_i", IIO_CURRENT,
+ AXP20X_VBUS_I_ADC_H),
+ {
+ .type = IIO_TEMP,
+ .address = AXP20X_TEMP_ADC_H,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_OFFSET),
+ .datasheet_name = "pmic_temp",
+ },
+ AXP20X_ADC_CHANNEL_OFFSET(AXP192_GPIO0_V, "gpio0_v", IIO_VOLTAGE,
+ AXP20X_GPIO0_V_ADC_H),
+ AXP20X_ADC_CHANNEL_OFFSET(AXP192_GPIO1_V, "gpio1_v", IIO_VOLTAGE,
+ AXP20X_GPIO1_V_ADC_H),
+ AXP20X_ADC_CHANNEL_OFFSET(AXP192_GPIO2_V, "gpio2_v", IIO_VOLTAGE,
+ AXP192_GPIO2_V_ADC_H),
+ AXP20X_ADC_CHANNEL_OFFSET(AXP192_GPIO3_V, "gpio3_v", IIO_VOLTAGE,
+ AXP192_GPIO3_V_ADC_H),
+ AXP20X_ADC_CHANNEL(AXP192_IPSOUT_V, "ipsout_v", IIO_VOLTAGE,
+ AXP20X_IPSOUT_V_HIGH_H),
+ AXP20X_ADC_CHANNEL(AXP192_BATT_V, "batt_v", IIO_VOLTAGE,
+ AXP20X_BATT_V_H),
+ AXP20X_ADC_CHANNEL(AXP192_BATT_CHRG_I, "batt_chrg_i", IIO_CURRENT,
+ AXP20X_BATT_CHRG_I_H),
+ AXP20X_ADC_CHANNEL(AXP192_BATT_DISCHRG_I, "batt_dischrg_i", IIO_CURRENT,
+ AXP20X_BATT_DISCHRG_I_H),
+ AXP20X_ADC_CHANNEL(AXP192_TS_IN, "ts_v", IIO_VOLTAGE,
+ AXP20X_TS_IN_H),
+};
+
static const struct iio_chan_spec axp20x_adc_channels[] = {
AXP20X_ADC_CHANNEL(AXP20X_ACIN_V, "acin_v", IIO_VOLTAGE,
AXP20X_ACIN_V_ADC_H),
@@ -231,6 +295,27 @@ static const struct iio_chan_spec axp813_adc_channels[] = {
AXP288_TS_ADC_H),
};

+static int axp192_adc_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val)
+{
+ struct axp20x_adc_iio *info = iio_priv(indio_dev);
+ int ret, size;
+
+ if (chan->type == IIO_CURRENT &&
+ (chan->channel == AXP192_BATT_CHRG_I ||
+ chan->channel == AXP192_BATT_DISCHRG_I))
+ size = 13;
+ else
+ size = 12;
+
+ ret = axp20x_read_variable_width(info->regmap, chan->address, size);
+ if (ret < 0)
+ return ret;
+
+ *val = ret;
+ return IIO_VAL_INT;
+}
+
static int axp20x_adc_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val)
{
@@ -283,6 +368,44 @@ static int axp813_adc_raw(struct iio_dev *indio_dev,
return IIO_VAL_INT;
}

+static int axp192_adc_scale_voltage(int channel, int *val, int *val2)
+{
+ switch (channel) {
+ case AXP192_ACIN_V:
+ case AXP192_VBUS_V:
+ *val = 1;
+ *val2 = 700000;
+ return IIO_VAL_INT_PLUS_MICRO;
+
+ case AXP192_GPIO0_V:
+ case AXP192_GPIO1_V:
+ case AXP192_GPIO2_V:
+ case AXP192_GPIO3_V:
+ *val = 0;
+ *val2 = 500000;
+ return IIO_VAL_INT_PLUS_MICRO;
+
+ case AXP192_BATT_V:
+ *val = 1;
+ *val2 = 100000;
+ return IIO_VAL_INT_PLUS_MICRO;
+
+ case AXP192_IPSOUT_V:
+ *val = 1;
+ *val2 = 400000;
+ return IIO_VAL_INT_PLUS_MICRO;
+
+ case AXP192_TS_IN:
+ /* 0.8 mV per LSB */
+ *val = 0;
+ *val2 = 800000;
+ return IIO_VAL_INT_PLUS_MICRO;
+
+ default:
+ return -EINVAL;
+ }
+}
+
static int axp20x_adc_scale_voltage(int channel, int *val, int *val2)
{
switch (channel) {
@@ -386,6 +509,29 @@ static int axp20x_adc_scale_current(int channel, int *val, int *val2)
}
}

+static int axp192_adc_scale(struct iio_chan_spec const *chan, int *val,
+ int *val2)
+{
+ switch (chan->type) {
+ case IIO_VOLTAGE:
+ return axp192_adc_scale_voltage(chan->channel, val, val2);
+
+ case IIO_CURRENT:
+ /*
+ * AXP192 current channels are identical to the AXP20x,
+ * therefore we can re-use the scaling function.
+ */
+ return axp20x_adc_scale_current(chan->channel, val, val2);
+
+ case IIO_TEMP:
+ *val = 100;
+ return IIO_VAL_INT;
+
+ default:
+ return -EINVAL;
+ }
+}
+
static int axp20x_adc_scale(struct iio_chan_spec const *chan, int *val,
int *val2)
{
@@ -445,6 +591,42 @@ static int axp813_adc_scale(struct iio_chan_spec const *chan, int *val,
}
}

+static int axp192_adc_offset_voltage(struct iio_dev *indio_dev, int channel,
+ int *val)
+{
+ struct axp20x_adc_iio *info = iio_priv(indio_dev);
+ unsigned int regval;
+ int ret;
+
+ ret = regmap_read(info->regmap, AXP192_GPIO30_IN_RANGE, &regval);
+ if (ret < 0)
+ return ret;
+
+ switch (channel) {
+ case AXP192_GPIO0_V:
+ regval = FIELD_GET(AXP192_GPIO30_IN_RANGE_GPIO0, regval);
+ break;
+
+ case AXP192_GPIO1_V:
+ regval = FIELD_GET(AXP192_GPIO30_IN_RANGE_GPIO1, regval);
+ break;
+
+ case AXP192_GPIO2_V:
+ regval = FIELD_GET(AXP192_GPIO30_IN_RANGE_GPIO2, regval);
+ break;
+
+ case AXP192_GPIO3_V:
+ regval = FIELD_GET(AXP192_GPIO30_IN_RANGE_GPIO3, regval);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ *val = regval ? 700000 : 0;
+ return IIO_VAL_INT;
+}
+
static int axp20x_adc_offset_voltage(struct iio_dev *indio_dev, int channel,
int *val)
{
@@ -473,6 +655,22 @@ static int axp20x_adc_offset_voltage(struct iio_dev *indio_dev, int channel,
return IIO_VAL_INT;
}

+static int axp192_adc_offset(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val)
+{
+ switch (chan->type) {
+ case IIO_VOLTAGE:
+ return axp192_adc_offset_voltage(indio_dev, chan->channel, val);
+
+ case IIO_TEMP:
+ *val = -1447;
+ return IIO_VAL_INT;
+
+ default:
+ return -EINVAL;
+ }
+}
+
static int axp20x_adc_offset(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val)
{
@@ -489,6 +687,25 @@ static int axp20x_adc_offset(struct iio_dev *indio_dev,
}
}

+static int axp192_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val,
+ int *val2, long mask)
+{
+ switch (mask) {
+ case IIO_CHAN_INFO_OFFSET:
+ return axp192_adc_offset(indio_dev, chan, val);
+
+ case IIO_CHAN_INFO_SCALE:
+ return axp192_adc_scale(chan, val, val2);
+
+ case IIO_CHAN_INFO_RAW:
+ return axp192_adc_raw(indio_dev, chan, val);
+
+ default:
+ return -EINVAL;
+ }
+}
+
static int axp20x_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val,
int *val2, long mask)
@@ -549,6 +766,51 @@ static int axp813_read_raw(struct iio_dev *indio_dev,
}
}

+static int axp192_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val, int val2,
+ long mask)
+{
+ struct axp20x_adc_iio *info = iio_priv(indio_dev);
+ unsigned int regmask, regval;
+
+ /*
+ * The AXP192 PMIC allows the user to choose between 0V and 0.7V offsets
+ * for (independently) GPIO0-3 when in ADC mode.
+ */
+ if (mask != IIO_CHAN_INFO_OFFSET)
+ return -EINVAL;
+
+ if (val != 0 && val != 700000)
+ return -EINVAL;
+
+ switch (chan->channel) {
+ case AXP192_GPIO0_V:
+ regmask = AXP192_GPIO30_IN_RANGE_GPIO0;
+ regval = FIELD_PREP(AXP192_GPIO30_IN_RANGE_GPIO0, !!val);
+ break;
+
+ case AXP192_GPIO1_V:
+ regmask = AXP192_GPIO30_IN_RANGE_GPIO1;
+ regval = FIELD_PREP(AXP192_GPIO30_IN_RANGE_GPIO1, !!val);
+ break;
+
+ case AXP192_GPIO2_V:
+ regmask = AXP192_GPIO30_IN_RANGE_GPIO2;
+ regval = FIELD_PREP(AXP192_GPIO30_IN_RANGE_GPIO2, !!val);
+ break;
+
+ case AXP192_GPIO3_V:
+ regmask = AXP192_GPIO30_IN_RANGE_GPIO3;
+ regval = FIELD_PREP(AXP192_GPIO30_IN_RANGE_GPIO3, !!val);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return regmap_update_bits(info->regmap, AXP192_GPIO30_IN_RANGE, regmask, regval);
+}
+
static int axp20x_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int val, int val2,
long mask)
@@ -584,6 +846,11 @@ static int axp20x_write_raw(struct iio_dev *indio_dev,
return regmap_update_bits(info->regmap, AXP20X_GPIO10_IN_RANGE, regmask, regval);
}

+static const struct iio_info axp192_adc_iio_info = {
+ .read_raw = axp192_read_raw,
+ .write_raw = axp192_write_raw,
+};
+
static const struct iio_info axp20x_adc_iio_info = {
.read_raw = axp20x_read_raw,
.write_raw = axp20x_write_raw,
@@ -629,6 +896,16 @@ struct axp_data {
struct iio_map *maps;
};

+static const struct axp_data axp192_data = {
+ .iio_info = &axp192_adc_iio_info,
+ .num_channels = ARRAY_SIZE(axp192_adc_channels),
+ .channels = axp192_adc_channels,
+ .adc_en1_mask = AXP192_ADC_EN1_MASK,
+ .adc_en2_mask = AXP192_ADC_EN2_MASK,
+ .adc_rate = axp20x_adc_rate,
+ .maps = axp20x_maps,
+};
+
static const struct axp_data axp20x_data = {
.iio_info = &axp20x_adc_iio_info,
.num_channels = ARRAY_SIZE(axp20x_adc_channels),
@@ -658,6 +935,7 @@ static const struct axp_data axp813_data = {
};

static const struct of_device_id axp20x_adc_of_match[] = {
+ { .compatible = "x-powers,axp192-adc", .data = (void *)&axp192_data, },
{ .compatible = "x-powers,axp209-adc", .data = (void *)&axp20x_data, },
{ .compatible = "x-powers,axp221-adc", .data = (void *)&axp22x_data, },
{ .compatible = "x-powers,axp813-adc", .data = (void *)&axp813_data, },
@@ -666,6 +944,7 @@ static const struct of_device_id axp20x_adc_of_match[] = {
MODULE_DEVICE_TABLE(of, axp20x_adc_of_match);

static const struct platform_device_id axp20x_adc_id_match[] = {
+ { .name = "axp192-adc", .driver_data = (kernel_ulong_t)&axp192_data, },
{ .name = "axp20x-adc", .driver_data = (kernel_ulong_t)&axp20x_data, },
{ .name = "axp22x-adc", .driver_data = (kernel_ulong_t)&axp22x_data, },
{ .name = "axp813-adc", .driver_data = (kernel_ulong_t)&axp813_data, },
--
2.35.1
\
 
 \ /
  Last update: 2022-07-06 12:21    [W:0.109 / U:1.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site