lkml.org 
[lkml]   [2022]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] ARM: dts: kswitch-d10: enable the USB device port
Hi Claudiu,

Am 2022-07-06 10:41, schrieb Claudiu.Beznea@microchip.com:
> On 05.07.2022 16:06, Michael Walle wrote:
>> EXTERNAL EMAIL: Do not click links or open attachments unless you know
>> the content is safe
>>
>> Now that there is driver support for the USB device, enable it.
>>
>> Signed-off-by: Michael Walle <michael@walle.cc>
>> ---
>> arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi | 5 +++++
>> 1 file changed, 5 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
>> b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
>> index 5a6c5f7c371a..d0d26e136c38 100644
>> --- a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
>> +++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
>> @@ -200,6 +200,11 @@ &switch {
>> status = "okay";
>> };
>>
>> +&udc {
>> + atmel,vbus-gpio = <&gpio 66 GPIO_ACTIVE_HIGH>;
>
> Can you also add pinctrl to avoid issues described in:

Do I need a pinctrl node even if I just use it as a gpio?
Isn't that handled automatically by the
.gpio_request_enable op?

-michael

\
 
 \ /
  Last update: 2022-07-06 10:59    [W:0.128 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site