lkml.org 
[lkml]   [2022]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 09/15] dt-bindings: firmware: Add fsl,scu yaml file
On 22-07-06 08:36:58, Rob Herring wrote:
> On Mon, Jul 04, 2022 at 07:15:35PM +0300, Viorel Suman (OSS) wrote:
> > From: Abel Vesa <abel.vesa@nxp.com>

[...]

> > diff --git a/Documentation/devicetree/bindings/firmware/fsl,scu.yaml b/Documentation/devicetree/bindings/firmware/fsl,scu.yaml
> > new file mode 100644
> > index 000000000000..c1f5b727352e
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/firmware/fsl,scu.yaml
> > @@ -0,0 +1,160 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/firmware/fsl,scu.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: NXP i.MX System Controller Firmware (SCFW)
> > +
> > +maintainers:
> > + - Dong Aisheng <aisheng.dong@nxp.com>
> > +
> > +description: System Controller Device Node
>
> The formatting here is not maintained unless you use a literal block
> ('|'). But I would just drop this first line.
>

Thank you for review, will update in the following version.

> > + The System Controller Firmware (SCFW) is a low-level system function
> > + which runs on a dedicated Cortex-M core to provide power, clock, and
> > + resource management. It exists on some i.MX8 processors. e.g. i.MX8QM
> > + (QM, QP), and i.MX8QX (QXP, DX).
> > + The AP communicates with the SC using a multi-ported MU module found
> > + in the LSIO subsystem. The current definition of this MU module provides
> > + 5 remote AP connections to the SC to support up to 5 execution environments
> > + (TZ, HV, standard Linux, etc.). The SC side of this MU module interfaces
> > + with the LSIO DSC IP bus. The SC firmware will communicate with this MU
> > + using the MSI bus.
> > +
> > +properties:
> > + compatible:
> > + const: fsl,imx-scu
> > +
> > + clock-controller:
> > + description:
> > + Clock controller node that provides the clocks controlled by the SCU
> > + $ref: /schemas/clock/fsl,scu-clk.yaml
> > +
> > + ocotp:
> > + description:
> > + OCOTP controller node provided by the SCU
> > + $ref: /schemas/nvmem/fsl,scu-ocotp.yaml
> > +
> > + keys:
> > + description:
> > + Keys provided by the SCU
> > + $ref: /schemas/input/fsl,scu-key.yaml
> > +
> > + mboxes:
> > + description: |
> > + List of phandle of 4 MU channels for tx, 4 MU channels for
> > + rx, and 1 optional MU channel for general interrupt.
> > + All MU channels must be in the same MU instance.
> > + Cross instances are not allowed. The MU instance can only
> > + be one of LSIO MU0~M4 for imx8qxp and imx8qm. Users need
> > + to make sure use the one which is not conflict with other
> > + execution environments. e.g. ATF.
> > + minItems: 1
> > + maxItems: 10
>
> Based on the description, shouldn't this be:
>
> minItems: 8
> maxItems: 9
>

Actually the description should be updated - there is a series sent by Abel
adding the support for i.MX8 DXL - it has just 1 MU channel for rx, 1 - for tx,
and 1 optional for general interrupt. An approach would be to add a structure
which will include two options - one for 8..9, another for 2..3.
Hopefully I'll be able to define a generic one.

> > +
> > + mbox-names:
> > + description:
> > + include "gip3" if want to support general MU interrupt.
>
> What are all the other names? Needs to be a schema, not freeform text.

Right, ok.

> > + minItems: 1
> > + maxItems: 10
> > +
> > + pinctrl:
> > + description:
> > + Pin controller provided by the SCU
> > + $ref: /schemas/pinctrl/fsl,scu-pinctrl.yaml
> > +
> > + power-controller:
> > + description: |
> > + Power domains controller node that provides the power domains
> > + controlled by the SCU
> > + $ref: /schemas/power/fsl,scu-pd.yaml
> > +
> > + rtc:
> > + description:
> > + RTC controller provided by the SCU
> > + $ref: /schemas/rtc/fsl,scu-rtc.yaml
> > +
> > + thermal-sensor:
> > + description:
> > + Thermal sensor provided by the SCU
> > + $ref: /schemas/thermal/fsl,scu-thermal.yaml
> > +
> > + watchdog:
> > + description:
> > + Watchdog controller provided by the SCU
> > + $ref: /schemas/watchdog/fsl,scu-wdt.yaml
> > +
> > +required:
> > + - compatible
> > + - mbox-names
> > + - mboxes
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/firmware/imx/rsrc.h>
> > + #include <dt-bindings/input/input.h>
> > + #include <dt-bindings/pinctrl/pads-imx8qxp.h>
> > +
> > + firmware {
> > + system-controller {
> > + compatible = "fsl,imx-scu";
> > + mbox-names = "tx0", "tx1", "tx2", "tx3",
> > + "rx0", "rx1", "rx2", "rx3",
> > + "gip3";
> > + mboxes = <&lsio_mu1 0 0 &lsio_mu1 0 1 &lsio_mu1 0 2 &lsio_mu1 0 3
> > + &lsio_mu1 1 0 &lsio_mu1 1 1 &lsio_mu1 1 2 &lsio_mu1 1 3
> > + &lsio_mu1 3 3>;
> > +
> > + clock-controller {
> > + compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
> > + #clock-cells = <2>;
> > + };
> > +
> > + pinctrl {
> > + compatible = "fsl,imx8qxp-iomuxc";
> > +
> > + pinctrl_lpuart0: lpuart0grp {
> > + fsl,pins = <
> > + IMX8QXP_UART0_RX_ADMA_UART0_RX 0x06000020
> > + IMX8QXP_UART0_TX_ADMA_UART0_TX 0x06000020
> > + >;
> > + };
> > + };
> > +
> > + ocotp {
> > + compatible = "fsl,imx8qxp-scu-ocotp";
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > +
> > + fec_mac0: mac@2c4 {
> > + reg = <0x2c4 6>;
> > + };
> > + };
> > +
> > + power-controller {
> > + compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd";
> > + #power-domain-cells = <1>;
> > + };
> > +
> > + rtc {
> > + compatible = "fsl,imx8qxp-sc-rtc";
> > + };
> > +
> > + keys {
> > + compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
> > + linux,keycodes = <KEY_POWER>;
> > + };
> > +
> > + watchdog {
> > + compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
> > + timeout-sec = <60>;
> > + };
> > +
> > + thermal-sensor {
> > + compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
> > + #thermal-sensor-cells = <1>;
> > + };
> > + };
> > + };
> > --
> > 2.25.1
> >
> >

\
 
 \ /
  Last update: 2022-07-06 19:22    [W:0.219 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site