lkml.org 
[lkml]   [2022]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 24/33] net: dsa: bcm_sf2: force pause link settings
Date
From: Doug Berger <opendmb@gmail.com>

commit 7c97bc0128b2eecc703106112679a69d446d1a12 upstream.

The pause settings reported by the PHY should also be applied to the GMII port
status override otherwise the switch will not generate pause frames towards the
link partner despite the advertisement saying otherwise.

Fixes: 246d7f773c13 ("net: dsa: add Broadcom SF2 switch driver")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220623030204.1966851-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/dsa/bcm_sf2.c | 5 +++++
1 file changed, 5 insertions(+)

--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -599,6 +599,11 @@ force_link:
reg |= LINK_STS;
if (state->duplex == DUPLEX_FULL)
reg |= DUPLX_MODE;
+ if (state->pause & MLO_PAUSE_TXRX_MASK) {
+ if (state->pause & MLO_PAUSE_TX)
+ reg |= TXFLOW_CNTL;
+ reg |= RXFLOW_CNTL;
+ }

core_writel(priv, reg, offset);
}

\
 
 \ /
  Last update: 2022-07-05 14:05    [W:0.189 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site