lkml.org 
[lkml]   [2022]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 14/14] arm64: dts: qcom: msm8996: clean up PCIe PHY node
Date
Clean up the PCIe PHY node by renaming the wrapper node and grouping the
child node properties.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 27 +++++++++++++++++----------
1 file changed, 17 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 16869bb7d625..98a4cad89e9f 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -585,7 +585,7 @@ soc: soc {
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";

- pcie_phy: phy@34000 {
+ pcie_phy: phy-wrapper@34000 {
compatible = "qcom,msm8996-qmp-pcie-phy";
reg = <0x00034000 0x488>;
#address-cells = <1>;
@@ -601,48 +601,55 @@ pcie_phy: phy@34000 {
<&gcc GCC_PCIE_PHY_COM_BCR>,
<&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
reset-names = "phy", "common", "cfg";
+
status = "disabled";

pciephy_0: phy@1000 {
reg = <0x1000 0x130>,
<0x1200 0x200>,
<0x1400 0x1dc>;
- #phy-cells = <0>;

- #clock-cells = <0>;
- clock-output-names = "pcie_0_pipe_clk_src";
clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
clock-names = "pipe0";
resets = <&gcc GCC_PCIE_0_PHY_BCR>;
reset-names = "lane0";
+
+ #clock-cells = <0>;
+ clock-output-names = "pcie_0_pipe_clk_src";
+
+ #phy-cells = <0>;
};

pciephy_1: phy@2000 {
reg = <0x2000 0x130>,
<0x2200 0x200>,
<0x2400 0x1dc>;
- #phy-cells = <0>;

- #clock-cells = <0>;
- clock-output-names = "pcie_1_pipe_clk_src";
clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
clock-names = "pipe1";
resets = <&gcc GCC_PCIE_1_PHY_BCR>;
reset-names = "lane1";
+
+ #clock-cells = <0>;
+ clock-output-names = "pcie_1_pipe_clk_src";
+
+ #phy-cells = <0>;
};

pciephy_2: phy@3000 {
reg = <0x3000 0x130>,
<0x3200 0x200>,
<0x3400 0x1dc>;
- #phy-cells = <0>;

- #clock-cells = <0>;
- clock-output-names = "pcie_2_pipe_clk_src";
clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
clock-names = "pipe2";
resets = <&gcc GCC_PCIE_2_PHY_BCR>;
reset-names = "lane2";
+
+ #clock-cells = <0>;
+ clock-output-names = "pcie_2_pipe_clk_src";
+
+ #phy-cells = <0>;
};
};

--
2.35.1
\
 
 \ /
  Last update: 2022-07-05 13:41    [W:0.158 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site