lkml.org 
[lkml]   [2022]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 13/14] arm64: dts: qcom: msm8996: use non-empty ranges for PCIe PHYs
Date
Clean up the PCIe PHY nodes by using a non-empty ranges property.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index b670d0412760..16869bb7d625 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -590,7 +590,7 @@ pcie_phy: phy@34000 {
reg = <0x00034000 0x488>;
#address-cells = <1>;
#size-cells = <1>;
- ranges;
+ ranges = <0x0 0x00034000 0x4000>;

clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
@@ -603,10 +603,10 @@ pcie_phy: phy@34000 {
reset-names = "phy", "common", "cfg";
status = "disabled";

- pciephy_0: phy@35000 {
- reg = <0x00035000 0x130>,
- <0x00035200 0x200>,
- <0x00035400 0x1dc>;
+ pciephy_0: phy@1000 {
+ reg = <0x1000 0x130>,
+ <0x1200 0x200>,
+ <0x1400 0x1dc>;
#phy-cells = <0>;

#clock-cells = <0>;
@@ -617,10 +617,10 @@ pciephy_0: phy@35000 {
reset-names = "lane0";
};

- pciephy_1: phy@36000 {
- reg = <0x00036000 0x130>,
- <0x00036200 0x200>,
- <0x00036400 0x1dc>;
+ pciephy_1: phy@2000 {
+ reg = <0x2000 0x130>,
+ <0x2200 0x200>,
+ <0x2400 0x1dc>;
#phy-cells = <0>;

#clock-cells = <0>;
@@ -631,10 +631,10 @@ pciephy_1: phy@36000 {
reset-names = "lane1";
};

- pciephy_2: phy@37000 {
- reg = <0x00037000 0x130>,
- <0x00037200 0x200>,
- <0x00037400 0x1dc>;
+ pciephy_2: phy@3000 {
+ reg = <0x3000 0x130>,
+ <0x3200 0x200>,
+ <0x3400 0x1dc>;
#phy-cells = <0>;

#clock-cells = <0>;
--
2.35.1
\
 
 \ /
  Last update: 2022-07-05 13:41    [W:0.184 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site