lkml.org 
[lkml]   [2022]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v13 3/3] usb: typec: anx7411: Add Analogix PD ANX7411 support
Date
Add driver for analogix ANX7411 USB Type-C DRP port controller.

Signed-off-by: Xin Ji <xji@analogixsemi.com>
---
V12 -> V13 :
1. Add driver description
2. Checking return value for each i2c operation
V11 -> V12 : Remove all define in anx7411.h to anx7411.c
V10 -> V11 : Fix Heikki's comment, code clean up
V9 -> V10 : Rebase on the latest code
V6 -> V7 : Fix Heikki's comment
Rebase on Greg's latest usb-next branch
Move tcpci.h to include/linux/usb/
Remove double definition
V5 -> V6 : Fix Heikki's comment
V4 -> V5 : Fix Greg h-k comment, remove DEBUG define
V3 -> V4 : Fix compiling waring
V2 -> V3 : Add changelog history
V1 -> V2 : Fix compiling warning issue

Signed-off-by: Xin Ji <xji@analogixsemi.com>
---
drivers/usb/typec/Kconfig | 11 +
drivers/usb/typec/Makefile | 1 +
drivers/usb/typec/anx7411.c | 1586 +++++++++++++++++++++++++++++++++++
3 files changed, 1598 insertions(+)
create mode 100644 drivers/usb/typec/anx7411.c

diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig
index ba24847fb245..5defdfead653 100644
--- a/drivers/usb/typec/Kconfig
+++ b/drivers/usb/typec/Kconfig
@@ -52,6 +52,17 @@ source "drivers/usb/typec/ucsi/Kconfig"

source "drivers/usb/typec/tipd/Kconfig"

+config TYPEC_ANX7411
+ tristate "Analogix ANX7411 Type-C DRP Port controller driver"
+ depends on I2C
+ depends on USB_ROLE_SWITCH
+ help
+ Say Y or M here if your system has Analogix ANX7411 Type-C DRP Port
+ controller driver.
+
+ If you choose to build this driver as a dynamically linked module, the
+ module will be called anx7411.ko.
+
config TYPEC_RT1719
tristate "Richtek RT1719 Sink Only Type-C controller driver"
depends on USB_ROLE_SWITCH || !USB_ROLE_SWITCH
diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile
index 2f174cd3e5df..dac5c11a3234 100644
--- a/drivers/usb/typec/Makefile
+++ b/drivers/usb/typec/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_TYPEC) += altmodes/
obj-$(CONFIG_TYPEC_TCPM) += tcpm/
obj-$(CONFIG_TYPEC_UCSI) += ucsi/
obj-$(CONFIG_TYPEC_TPS6598X) += tipd/
+obj-$(CONFIG_TYPEC_ANX7411) += anx7411.o
obj-$(CONFIG_TYPEC_HD3SS3220) += hd3ss3220.o
obj-$(CONFIG_TYPEC_QCOM_PMIC) += qcom-pmic-typec.o
obj-$(CONFIG_TYPEC_STUSB160X) += stusb160x.o
diff --git a/drivers/usb/typec/anx7411.c b/drivers/usb/typec/anx7411.c
new file mode 100644
index 000000000000..a958822b8a66
--- /dev/null
+++ b/drivers/usb/typec/anx7411.c
@@ -0,0 +1,1586 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/*
+ * Driver for Analogix ANX7411 USB Type-C and PD controller
+ *
+ * Copyright(c) 2022, Analogix Semiconductor. All rights reserved.
+ *
+ */
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_graph.h>
+#include <linux/of_platform.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/usb/pd.h>
+#include <linux/usb/role.h>
+#include <linux/usb/tcpci.h>
+#include <linux/usb/typec.h>
+#include <linux/usb/typec_dp.h>
+#include <linux/usb/typec_mux.h>
+#include <linux/workqueue.h>
+#include <linux/power_supply.h>
+
+#define TCPC_ADDRESS1 0x58
+#define TCPC_ADDRESS2 0x56
+#define TCPC_ADDRESS3 0x54
+#define TCPC_ADDRESS4 0x52
+#define SPI_ADDRESS1 0x7e
+#define SPI_ADDRESS2 0x6e
+#define SPI_ADDRESS3 0x64
+#define SPI_ADDRESS4 0x62
+
+struct anx7411_i2c_select {
+ u8 tcpc_address;
+ u8 spi_address;
+};
+
+#define VID_ANALOGIX 0x1F29
+#define PID_ANALOGIX 0x7411
+
+/* TCPC register define */
+
+#define ANALOG_CTRL_10 0xAA
+
+#define STATUS_LEN 2
+#define ALERT_0 0xCB
+#define RECEIVED_MSG BIT(7)
+#define SOFTWARE_INT BIT(6)
+#define MSG_LEN 32
+#define HEADER_LEN 2
+#define MSG_HEADER 0x00
+#define MSG_TYPE 0x01
+#define MSG_RAWDATA 0x02
+#define MSG_LEN_MASK 0x1F
+
+#define ALERT_1 0xCC
+#define INTP_POW_ON BIT(7)
+#define INTP_POW_OFF BIT(6)
+
+#define VBUS_THRESHOLD_H 0xDD
+#define VBUS_THRESHOLD_L 0xDE
+
+#define FW_CTRL_0 0xF0
+#define UNSTRUCT_VDM_EN BIT(0)
+#define DELAY_200MS BIT(1)
+#define VSAFE0 0
+#define VSAFE1 BIT(2)
+#define VSAFE2 BIT(3)
+#define VSAFE3 (BIT(2) | BIT(3))
+#define FRS_EN BIT(7)
+
+#define FW_PARAM 0xF1
+#define DONGLE_IOP BIT(0)
+
+#define FW_CTRL_2 0xF7
+#define SINK_CTRL_DIS_FLAG BIT(5)
+
+/* SPI register define */
+#define OCM_CTRL_0 0x6E
+#define OCM_RESET BIT(6)
+
+#define MAX_VOLTAGE 0xAC
+#define MAX_POWER 0xAD
+#define MIN_POWER 0xAE
+
+#define REQUEST_VOLTAGE 0xAF
+#define VOLTAGE_UNIT 100 /* mV per unit */
+
+#define REQUEST_CURRENT 0xB1
+#define CURRENT_UNIT 50 /* mA per unit */
+
+#define CMD_SEND_BUF 0xC0
+#define CMD_RECV_BUF 0xE0
+
+#define REQ_VOL_20V_IN_100MV 0xC8
+#define REQ_CUR_2_25A_IN_50MA 0x2D
+#define REQ_CUR_3_25A_IN_50MA 0x41
+
+#define DEF_5V 5000
+#define DEF_1_5A 1500
+
+#define LOBYTE(w) ((u8)(w) & 0xFF)
+#define HIBYTE(w) ((u8)(((u16)(w) >> 8) & 0xFF))
+
+enum anx7411_typec_message_type {
+ TYPE_SRC_CAP = 0x00,
+ TYPE_SNK_CAP = 0x01,
+ TYPE_SNK_IDENTITY = 0x02,
+ TYPE_SVID = 0x03,
+ TYPE_SET_SNK_DP_CAP = 0x08,
+ TYPE_PSWAP_REQ = 0x10,
+ TYPE_DSWAP_REQ = 0x11,
+ TYPE_VDM = 0x14,
+ TYPE_OBJ_REQ = 0x16,
+ TYPE_DP_ALT_ENTER = 0x19,
+ TYPE_DP_DISCOVER_MODES_INFO = 0x27,
+ TYPE_GET_DP_CONFIG = 0x29,
+ TYPE_DP_CONFIGURE = 0x2A,
+ TYPE_GET_DP_DISCOVER_MODES_INFO = 0x2E,
+ TYPE_GET_DP_ALT_ENTER = 0x2F,
+};
+
+#define FW_CTRL_1 0xB2
+#define AUTO_PD_EN BIT(1)
+#define TRYSRC_EN BIT(2)
+#define TRYSNK_EN BIT(3)
+#define FORCE_SEND_RDO BIT(6)
+
+#define FW_VER 0xB4
+#define FW_SUBVER 0xB5
+
+#define INT_MASK 0xB6
+#define INT_STS 0xB7
+#define OCM_BOOT_UP BIT(0)
+#define OC_OV_EVENT BIT(1)
+#define VCONN_CHANGE BIT(2)
+#define VBUS_CHANGE BIT(3)
+#define CC_STATUS_CHANGE BIT(4)
+#define DATA_ROLE_CHANGE BIT(5)
+#define PR_CONSUMER_GOT_POWER BIT(6)
+#define HPD_STATUS_CHANGE BIT(7)
+
+#define SYSTEM_STSTUS 0xB8
+/* 0: SINK off; 1: SINK on */
+#define SINK_STATUS BIT(1)
+/* 0: VCONN off; 1: VCONN on*/
+#define VCONN_STATUS BIT(2)
+/* 0: vbus off; 1: vbus on*/
+#define VBUS_STATUS BIT(3)
+/* 1: host; 0:device*/
+#define DATA_ROLE BIT(5)
+/* 0: Chunking; 1: Unchunked*/
+#define SUPPORT_UNCHUNKING BIT(6)
+/* 0: HPD low; 1: HPD high*/
+#define HPD_STATUS BIT(7)
+
+#define DATA_DFP 1
+#define DATA_UFP 2
+#define POWER_SOURCE 1
+#define POWER_SINK 2
+
+#define CC_STATUS 0xB9
+#define CC1_RD BIT(0)
+#define CC2_RD BIT(4)
+#define CC1_RA BIT(1)
+#define CC2_RA BIT(5)
+#define CC1_RD BIT(0)
+#define CC1_RP(cc) (((cc) >> 2) & 0x03)
+#define CC2_RP(cc) (((cc) >> 6) & 0x03)
+
+#define PD_REV_INIT 0xBA
+
+#define PD_EXT_MSG_CTRL 0xBB
+#define SRC_CAP_EXT_REPLY BIT(0)
+#define MANUFACTURER_INFO_REPLY BIT(1)
+#define BATTERY_STS_REPLY BIT(2)
+#define BATTERY_CAP_REPLY BIT(3)
+#define ALERT_REPLY BIT(4)
+#define STATUS_REPLY BIT(5)
+#define PPS_STATUS_REPLY BIT(6)
+#define SNK_CAP_EXT_REPLY BIT(7)
+
+#define NO_CONNECT 0x00
+#define USB3_1_CONNECTED 0x01
+#define DP_ALT_4LANES 0x02
+#define USB3_1_DP_2LANES 0x03
+#define CC1_CONNECTED 0x01
+#define CC2_CONNECTED 0x02
+#define SELECT_PIN_ASSIGMENT_C 0x04
+#define SELECT_PIN_ASSIGMENT_D 0x08
+#define SELECT_PIN_ASSIGMENT_E 0x10
+#define SELECT_PIN_ASSIGMENT_U 0x00
+#define REDRIVER_ADDRESS 0x20
+#define REDRIVER_OFFSET 0x00
+
+#define DP_SVID 0xFF01
+#define VDM_ACK 0x40
+#define VDM_CMD_RES 0x00
+#define VDM_CMD_DIS_ID 0x01
+#define VDM_CMD_DIS_SVID 0x02
+#define VDM_CMD_DIS_MOD 0x03
+#define VDM_CMD_ENTER_MODE 0x04
+#define VDM_CMD_EXIT_MODE 0x05
+#define VDM_CMD_ATTENTION 0x06
+#define VDM_CMD_GET_STS 0x10
+#define VDM_CMD_AND_ACK_MASK 0x5F
+
+#define MAX_ALTMODE 2
+
+#define HAS_SOURCE_CAP BIT(0)
+#define HAS_SINK_CAP BIT(1)
+#define HAS_SINK_WATT BIT(2)
+
+enum anx7411_psy_state {
+ /* copy from drivers/usb/typec/tcpm */
+ ANX7411_PSY_OFFLINE = 0,
+ ANX7411_PSY_FIXED_ONLINE,
+
+ /* private */
+ /* PD keep in, but disconnct power to bq25700,
+ * this state can be active when higher capacity adapter plug in,
+ * and change to ONLINE state when higher capacity adapter plug out
+ */
+ ANX7411_PSY_HANG = 0xff,
+};
+
+struct typec_params {
+ int request_current; /* ma */
+ int request_voltage; /* mv */
+ int cc_connect;
+ int cc_orientation_valid;
+ int cc_status;
+ int data_role;
+ int power_role;
+ int vconn_role;
+ int dp_altmode_enter;
+ int cust_altmode_enter;
+ struct usb_role_switch *role_sw;
+ struct typec_port *port;
+ struct typec_partner *partner;
+ struct typec_mux_dev *typec_mux;
+ struct typec_switch_dev *typec_switch;
+ struct typec_altmode *amode[MAX_ALTMODE];
+ struct typec_altmode *port_amode[MAX_ALTMODE];
+ struct typec_displayport_data data;
+ int pin_assignment;
+ struct typec_capability caps;
+ u32 src_pdo[PDO_MAX_OBJECTS];
+ u32 sink_pdo[PDO_MAX_OBJECTS];
+ u8 caps_flags;
+ u8 src_pdo_nr;
+ u8 sink_pdo_nr;
+ u8 sink_watt;
+ u8 sink_voltage;
+};
+
+#define MAX_BUF_LEN 30
+struct fw_msg {
+ u8 msg_len;
+ u8 msg_type;
+ u8 buf[MAX_BUF_LEN];
+} __packed;
+
+struct anx7411_data {
+ int fw_version;
+ int fw_subversion;
+ struct i2c_client *tcpc_client;
+ struct i2c_client *spi_client;
+ struct fw_msg send_msg;
+ struct fw_msg recv_msg;
+ struct gpio_desc *intp_gpiod;
+ struct fwnode_handle *connector_fwnode;
+ struct typec_params typec;
+ int intp_irq;
+ struct work_struct work;
+ struct workqueue_struct *workqueue;
+ /* Lock for interrupt work queue */
+ struct mutex lock;
+
+ enum anx7411_psy_state psy_online;
+ enum power_supply_usb_type usb_type;
+ struct power_supply *psy;
+ struct power_supply_desc psy_desc;
+ struct device *dev;
+};
+
+static u8 snk_identity[] = {
+ LOBYTE(VID_ANALOGIX), HIBYTE(VID_ANALOGIX), 0x00, 0x82, /* snk_id_hdr */
+ 0x00, 0x00, 0x00, 0x00, /* snk_cert */
+ 0x00, 0x00, LOBYTE(PID_ANALOGIX), HIBYTE(PID_ANALOGIX), /* 5snk_ama */
+};
+
+static u8 dp_caps[4] = {0xC6, 0x00, 0x00, 0x00};
+
+static int anx7411_reg_read(struct i2c_client *client,
+ u8 reg_addr)
+{
+ return i2c_smbus_read_byte_data(client, reg_addr);
+}
+
+static int anx7411_reg_block_read(struct i2c_client *client,
+ u8 reg_addr, u8 len, u8 *buf)
+{
+ return i2c_smbus_read_i2c_block_data(client, reg_addr, len, buf);
+}
+
+static int anx7411_reg_write(struct i2c_client *client,
+ u8 reg_addr, u8 reg_val)
+{
+ return i2c_smbus_write_byte_data(client, reg_addr, reg_val);
+}
+
+static int anx7411_reg_block_write(struct i2c_client *client,
+ u8 reg_addr, u8 len, u8 *buf)
+{
+ return i2c_smbus_write_i2c_block_data(client, reg_addr, len, buf);
+}
+
+static struct anx7411_i2c_select anx7411_i2c_addr[] = {
+ {TCPC_ADDRESS1, SPI_ADDRESS1},
+ {TCPC_ADDRESS2, SPI_ADDRESS2},
+ {TCPC_ADDRESS3, SPI_ADDRESS3},
+ {TCPC_ADDRESS4, SPI_ADDRESS4},
+};
+
+static int anx7411_detect_power_mode(struct anx7411_data *ctx)
+{
+ int ret;
+ int mode;
+
+ ret = anx7411_reg_read(ctx->spi_client, REQUEST_CURRENT);
+ if (ret < 0)
+ return ret;
+
+ ctx->typec.request_current = ret * CURRENT_UNIT; /* 50ma per unit */
+
+ ret = anx7411_reg_read(ctx->spi_client, REQUEST_VOLTAGE);
+ if (ret < 0)
+ return ret;
+
+ ctx->typec.request_voltage = ret * VOLTAGE_UNIT; /* 100mv per unit */
+
+ if (ctx->psy_online == ANX7411_PSY_OFFLINE) {
+ ctx->psy_online = ANX7411_PSY_FIXED_ONLINE;
+ ctx->usb_type = POWER_SUPPLY_USB_TYPE_PD;
+ power_supply_changed(ctx->psy);
+ }
+
+ if (!ctx->typec.cc_orientation_valid)
+ return 0;
+
+ if (ctx->typec.cc_connect == CC1_CONNECTED)
+ mode = CC1_RP(ctx->typec.cc_status);
+ else
+ mode = CC2_RP(ctx->typec.cc_status);
+ if (mode) {
+ typec_set_pwr_opmode(ctx->typec.port, mode - 1);
+ return 0;
+ }
+
+ typec_set_pwr_opmode(ctx->typec.port, TYPEC_PWR_MODE_PD);
+
+ return 0;
+}
+
+static int anx7411_register_partner(struct anx7411_data *ctx,
+ int pd, int accessory)
+{
+ struct typec_partner_desc desc;
+
+ if (ctx->typec.partner)
+ return 0;
+
+ desc.usb_pd = pd;
+ desc.accessory = accessory;
+ desc.identity = NULL;
+ ctx->typec.partner = typec_register_partner(ctx->typec.port, &desc);
+ if (IS_ERR(ctx->typec.partner)) {
+ ctx->typec.partner = NULL;
+ return PTR_ERR(ctx->typec.partner);
+ }
+
+ return 0;
+}
+
+static int anx7411_detect_cc_orientation(struct anx7411_data *ctx)
+{
+ int ret;
+ int cc1_rd, cc2_rd;
+ int cc1_ra, cc2_ra;
+ int cc1_rp, cc2_rp;
+
+ ret = anx7411_reg_read(ctx->spi_client, CC_STATUS);
+ if (ret < 0)
+ return ret;
+
+ ctx->typec.cc_status = ret;
+
+ cc1_rd = ret & CC1_RD ? 1 : 0;
+ cc2_rd = ret & CC2_RD ? 1 : 0;
+ cc1_ra = ret & CC1_RA ? 1 : 0;
+ cc2_ra = ret & CC2_RA ? 1 : 0;
+ cc1_rp = CC1_RP(ret);
+ cc2_rp = CC2_RP(ret);
+
+ /* Debug cable, nothing to do */
+ if (cc1_rd && cc2_rd) {
+ ctx->typec.cc_orientation_valid = 0;
+ anx7411_register_partner(ctx, 0, TYPEC_ACCESSORY_DEBUG);
+ return 0;
+ }
+
+ if (cc1_ra && cc2_ra) {
+ ctx->typec.cc_orientation_valid = 0;
+ anx7411_register_partner(ctx, 0, TYPEC_ACCESSORY_AUDIO);
+ return 0;
+ }
+
+ ctx->typec.cc_orientation_valid = 1;
+
+ anx7411_register_partner(ctx, 1, TYPEC_ACCESSORY_NONE);
+
+ if (cc1_rd || cc1_rp) {
+ typec_set_orientation(ctx->typec.port, TYPEC_ORIENTATION_NORMAL);
+ ctx->typec.cc_connect = CC1_CONNECTED;
+ }
+
+ if (cc2_rd || cc2_rp) {
+ typec_set_orientation(ctx->typec.port, TYPEC_ORIENTATION_REVERSE);
+ ctx->typec.cc_connect = CC2_CONNECTED;
+ }
+
+ return 0;
+}
+
+static int anx7411_set_mux(struct anx7411_data *ctx, int pin_assignment)
+{
+ int mode = TYPEC_STATE_SAFE;
+
+ switch (pin_assignment) {
+ case SELECT_PIN_ASSIGMENT_U:
+ /* default 4 line USB 3.1 */
+ mode = TYPEC_STATE_MODAL;
+ break;
+ case SELECT_PIN_ASSIGMENT_C:
+ case SELECT_PIN_ASSIGMENT_E:
+ /* 4 line DP */
+ mode = TYPEC_STATE_SAFE;
+ break;
+ case SELECT_PIN_ASSIGMENT_D:
+ /* 2 line DP, 2 line USB */
+ mode = TYPEC_MODE_USB3;
+ break;
+ default:
+ mode = TYPEC_STATE_SAFE;
+ break;
+ }
+
+ ctx->typec.pin_assignment = pin_assignment;
+
+ return typec_set_mode(ctx->typec.port, mode);
+}
+
+static void anx7411_set_usb_role(struct anx7411_data *ctx, enum usb_role role)
+{
+ if (!ctx->typec.role_sw)
+ return;
+
+ usb_role_switch_set_role(ctx->typec.role_sw, role);
+}
+
+static int anx7411_data_role_detect(struct anx7411_data *ctx)
+{
+ int ret;
+
+ ret = anx7411_reg_read(ctx->spi_client, SYSTEM_STSTUS);
+ if (ret < 0)
+ return ret;
+
+ ctx->typec.data_role = (ret & DATA_ROLE) ? TYPEC_HOST : TYPEC_DEVICE;
+ ctx->typec.vconn_role = (ret & VCONN_STATUS) ? TYPEC_SOURCE : TYPEC_SINK;
+
+ typec_set_data_role(ctx->typec.port, ctx->typec.data_role);
+ typec_set_vconn_role(ctx->typec.port, ctx->typec.vconn_role);
+
+ if (ctx->typec.data_role == TYPEC_HOST)
+ anx7411_set_usb_role(ctx, USB_ROLE_HOST);
+ else
+ anx7411_set_usb_role(ctx, USB_ROLE_DEVICE);
+
+ return 0;
+}
+
+static int anx7411_power_role_detect(struct anx7411_data *ctx)
+{
+ int ret;
+
+ ret = anx7411_reg_read(ctx->spi_client, SYSTEM_STSTUS);
+ if (ret < 0)
+ return ret;
+
+ ctx->typec.power_role = (ret & SINK_STATUS) ? TYPEC_SINK : TYPEC_SOURCE;
+
+ if (ctx->typec.power_role == TYPEC_SOURCE) {
+ ctx->typec.request_current = DEF_1_5A;
+ ctx->typec.request_voltage = DEF_5V;
+ }
+
+ typec_set_pwr_role(ctx->typec.port, ctx->typec.power_role);
+
+ return 0;
+}
+
+static int anx7411_cc_status_detect(struct anx7411_data *ctx)
+{
+ anx7411_detect_cc_orientation(ctx);
+ anx7411_detect_power_mode(ctx);
+
+ return 0;
+}
+
+static int anx7411_partner_unregister_altmode(struct anx7411_data *ctx)
+{
+ int i;
+
+ ctx->typec.dp_altmode_enter = 0;
+ ctx->typec.cust_altmode_enter = 0;
+
+ for (i = 0; i < MAX_ALTMODE; i++)
+ if (ctx->typec.amode[i]) {
+ typec_unregister_altmode(ctx->typec.amode[i]);
+ ctx->typec.amode[i] = NULL;
+ }
+
+ ctx->typec.pin_assignment = 0;
+ return 0;
+}
+
+static int anx7411_typec_register_altmode(struct anx7411_data *ctx,
+ int svid, int vdo)
+{
+ struct device *dev = &ctx->spi_client->dev;
+ struct typec_altmode_desc desc;
+ int i;
+
+ desc.svid = svid;
+ desc.vdo = vdo;
+
+ for (i = 0; i < MAX_ALTMODE; i++)
+ if (!ctx->typec.amode[i])
+ break;
+
+ desc.mode = i + 1; /* start with 1 */
+
+ if (i >= MAX_ALTMODE) {
+ dev_err(dev, "no altmode space for registering\n");
+ return -ENOMEM;
+ }
+
+ ctx->typec.amode[i] = typec_partner_register_altmode(ctx->typec.partner,
+ &desc);
+ if (IS_ERR(ctx->typec.amode[i])) {
+ dev_err(dev, "failed to register altmode\n");
+ ctx->typec.amode[i] = NULL;
+ return PTR_ERR(ctx->typec.amode);
+ }
+
+ return 0;
+}
+
+static int anx7411_unregister_partner(struct anx7411_data *ctx)
+{
+ if (ctx->typec.partner) {
+ typec_unregister_partner(ctx->typec.partner);
+ ctx->typec.partner = NULL;
+ }
+
+ return 0;
+}
+
+static int anx7411_update_altmode(struct anx7411_data *ctx, int svid)
+{
+ int i;
+
+ if (svid == DP_SVID)
+ ctx->typec.dp_altmode_enter = 1;
+ else
+ ctx->typec.cust_altmode_enter = 1;
+
+ for (i = 0; i < MAX_ALTMODE; i++) {
+ if (!ctx->typec.amode[i])
+ continue;
+
+ if (ctx->typec.amode[i]->svid == svid) {
+ typec_altmode_update_active(ctx->typec.amode[i], true);
+ typec_altmode_notify(ctx->typec.amode[i],
+ ctx->typec.pin_assignment,
+ &ctx->typec.data);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+static int anx7411_register_altmode(struct anx7411_data *ctx,
+ bool dp_altmode, u8 *buf)
+{
+ int ret;
+ int svid;
+ int mid;
+
+ if (!ctx->typec.partner)
+ return 0;
+
+ svid = DP_SVID;
+ if (dp_altmode) {
+ mid = buf[0] | (buf[1] << 8) | (buf[2] << 16) | (buf[3] << 24);
+
+ return anx7411_typec_register_altmode(ctx, svid, mid);
+ }
+
+ svid = (buf[3] << 8) | buf[2];
+ if ((buf[0] & VDM_CMD_AND_ACK_MASK) != (VDM_ACK | VDM_CMD_ENTER_MODE))
+ return anx7411_update_altmode(ctx, svid);
+
+ if ((buf[0] & VDM_CMD_AND_ACK_MASK) != (VDM_ACK | VDM_CMD_DIS_MOD))
+ return 0;
+
+ mid = buf[4] | (buf[5] << 8) | (buf[6] << 16) | (buf[7] << 24);
+
+ ret = anx7411_typec_register_altmode(ctx, svid, mid);
+ if (ctx->typec.cust_altmode_enter)
+ ret |= anx7411_update_altmode(ctx, svid);
+
+ return ret;
+}
+
+static int anx7411_parse_cmd(struct anx7411_data *ctx, u8 type, u8 *buf, u8 len)
+{
+ struct device *dev = &ctx->spi_client->dev;
+ u8 cur_50ma, vol_100mv;
+
+ switch (type) {
+ case TYPE_SRC_CAP:
+ cur_50ma = anx7411_reg_read(ctx->spi_client, REQUEST_CURRENT);
+ vol_100mv = anx7411_reg_read(ctx->spi_client, REQUEST_VOLTAGE);
+
+ ctx->typec.request_voltage = vol_100mv * VOLTAGE_UNIT;
+ ctx->typec.request_current = cur_50ma * CURRENT_UNIT;
+
+ ctx->psy_online = ANX7411_PSY_FIXED_ONLINE;
+ ctx->usb_type = POWER_SUPPLY_USB_TYPE_PD;
+ power_supply_changed(ctx->psy);
+ break;
+ case TYPE_SNK_CAP:
+ break;
+ case TYPE_SVID:
+ break;
+ case TYPE_SNK_IDENTITY:
+ break;
+ case TYPE_GET_DP_ALT_ENTER:
+ /* DP alt mode enter success */
+ if (buf[0])
+ anx7411_update_altmode(ctx, DP_SVID);
+ break;
+ case TYPE_DP_ALT_ENTER:
+ /* Update DP altmode */
+ anx7411_update_altmode(ctx, DP_SVID);
+ break;
+ case TYPE_OBJ_REQ:
+ anx7411_detect_power_mode(ctx);
+ break;
+ case TYPE_DP_CONFIGURE:
+ anx7411_set_mux(ctx, buf[1]);
+ break;
+ case TYPE_DP_DISCOVER_MODES_INFO:
+ /* Make sure discover modes valid */
+ if (buf[0] | buf[1])
+ /* Register DP Altmode */
+ anx7411_register_altmode(ctx, 1, buf);
+ break;
+ case TYPE_VDM:
+ /* Register other altmode */
+ anx7411_register_altmode(ctx, 0, buf);
+ break;
+ default:
+ dev_err(dev, "ignore message(0x%.02x).\n", type);
+ break;
+ }
+
+ return 0;
+}
+
+static u8 checksum(struct device *dev, u8 *buf, u8 len)
+{
+ u8 ret = 0;
+ u8 i;
+
+ for (i = 0; i < len; i++)
+ ret += buf[i];
+
+ return ret;
+}
+
+static int anx7411_read_msg_ctrl_status(struct i2c_client *client)
+{
+ return anx7411_reg_read(client, CMD_SEND_BUF);
+}
+
+static int anx7411_wait_msg_empty(struct i2c_client *client)
+{
+ int val;
+
+ return readx_poll_timeout(anx7411_read_msg_ctrl_status,
+ client, val, (val < 0) || (val == 0),
+ 2000, 2000 * 150);
+}
+
+static int anx7411_send_msg(struct anx7411_data *ctx, u8 type, u8 *buf, u8 size)
+{
+ struct device *dev = &ctx->spi_client->dev;
+ struct fw_msg *msg = &ctx->send_msg;
+ u8 crc;
+ int ret;
+
+ size = min(size, (u8)MAX_BUF_LEN);
+ memcpy(msg->buf, buf, size);
+ msg->msg_type = type;
+ /* msg len equals buffer length + msg_type */
+ msg->msg_len = size + 1;
+
+ /* Do CRC check for all buffer data and msg_len and msg_type */
+ crc = checksum(dev, (u8 *)msg, size + HEADER_LEN);
+ msg->buf[size] = 0 - crc;
+
+ ret = anx7411_wait_msg_empty(ctx->spi_client);
+ if (ret)
+ return ret;
+
+ ret = anx7411_reg_block_write(ctx->spi_client,
+ CMD_SEND_BUF + 1, size + HEADER_LEN,
+ &msg->msg_type);
+ ret |= anx7411_reg_write(ctx->spi_client, CMD_SEND_BUF,
+ msg->msg_len);
+ return ret;
+}
+
+static int anx7411_process_cmd(struct anx7411_data *ctx)
+{
+ struct device *dev = &ctx->spi_client->dev;
+ struct fw_msg *msg = &ctx->recv_msg;
+ u8 len;
+ u8 crc;
+ int ret;
+
+ /* Read message from firmware */
+ ret = anx7411_reg_block_read(ctx->spi_client, CMD_RECV_BUF,
+ MSG_LEN, (u8 *)msg);
+ if (ret < 0)
+ return 0;
+
+ if (!msg->msg_len)
+ return 0;
+
+ ret = anx7411_reg_write(ctx->spi_client, CMD_RECV_BUF, 0);
+ if (ret)
+ return ret;
+
+ len = msg->msg_len & MSG_LEN_MASK;
+ crc = checksum(dev, (u8 *)msg, len + HEADER_LEN);
+ if (crc) {
+ dev_err(dev, "message error crc(0x%.02x)\n", crc);
+ return -ERANGE;
+ }
+
+ return anx7411_parse_cmd(ctx, msg->msg_type, msg->buf, len - 1);
+}
+
+static void anx7411_translate_payload(struct device *dev, __le32 *payload,
+ u32 *pdo, int nr, const char *type)
+{
+ int i;
+
+ if (nr > PDO_MAX_OBJECTS) {
+ dev_err(dev, "nr(%d) exceed PDO_MAX_OBJECTS(%d)\n",
+ nr, PDO_MAX_OBJECTS);
+
+ return;
+ }
+
+ for (i = 0; i < nr; i++)
+ payload[i] = cpu_to_le32(pdo[i]);
+}
+
+static int anx7411_config(struct anx7411_data *ctx)
+{
+ struct device *dev = &ctx->spi_client->dev;
+ struct typec_params *typecp = &ctx->typec;
+ __le32 payload[PDO_MAX_OBJECTS];
+ int ret;
+
+ /* Config PD FW work under PD 2.0 */
+ ret = anx7411_reg_write(ctx->spi_client, PD_REV_INIT, PD_REV20);
+ ret |= anx7411_reg_write(ctx->tcpc_client, FW_CTRL_0,
+ UNSTRUCT_VDM_EN | DELAY_200MS |
+ VSAFE1 | FRS_EN);
+ ret |= anx7411_reg_write(ctx->spi_client, FW_CTRL_1,
+ AUTO_PD_EN | FORCE_SEND_RDO);
+
+ /* Set VBUS current threshold */
+ ret |= anx7411_reg_write(ctx->tcpc_client, VBUS_THRESHOLD_H, 0xff);
+ ret |= anx7411_reg_write(ctx->tcpc_client, VBUS_THRESHOLD_L, 0x03);
+
+ /* Fix dongle compatible issue */
+ ret |= anx7411_reg_write(ctx->tcpc_client, FW_PARAM,
+ anx7411_reg_read(ctx->tcpc_client, FW_PARAM) |
+ DONGLE_IOP);
+ ret |= anx7411_reg_write(ctx->spi_client, INT_MASK, 0);
+
+ ret |= anx7411_reg_write(ctx->spi_client, PD_EXT_MSG_CTRL, 0xFF);
+ if (ret)
+ return ret;
+
+ if (typecp->caps_flags & HAS_SOURCE_CAP) {
+ anx7411_translate_payload(dev, payload, typecp->src_pdo,
+ typecp->src_pdo_nr, "source");
+ anx7411_send_msg(ctx, TYPE_SRC_CAP, (u8 *)&payload,
+ typecp->src_pdo_nr * 4);
+ anx7411_send_msg(ctx, TYPE_SNK_IDENTITY, snk_identity,
+ sizeof(snk_identity));
+ anx7411_send_msg(ctx, TYPE_SET_SNK_DP_CAP, dp_caps,
+ sizeof(dp_caps));
+ }
+
+ if (typecp->caps_flags & HAS_SINK_CAP) {
+ anx7411_translate_payload(dev, payload, typecp->sink_pdo,
+ typecp->sink_pdo_nr, "sink");
+ anx7411_send_msg(ctx, TYPE_SNK_CAP, (u8 *)&payload,
+ typecp->sink_pdo_nr * 4);
+ }
+
+ if (typecp->caps_flags & HAS_SINK_WATT) {
+ if (typecp->sink_watt) {
+ ret |= anx7411_reg_write(ctx->spi_client, MAX_POWER,
+ typecp->sink_watt);
+ /* Set min power to 1W */
+ ret |= anx7411_reg_write(ctx->spi_client, MIN_POWER, 2);
+ }
+
+ if (typecp->sink_voltage)
+ ret |= anx7411_reg_write(ctx->spi_client, MAX_VOLTAGE,
+ typecp->sink_voltage);
+ if (ret)
+ return ret;
+ }
+
+ if (!typecp->caps_flags)
+ usleep_range(5000, 6000);
+
+ ctx->fw_version = anx7411_reg_read(ctx->spi_client, FW_VER);
+ ctx->fw_subversion = anx7411_reg_read(ctx->spi_client, FW_SUBVER);
+
+ return 0;
+}
+
+static void anx7411_chip_standby(struct anx7411_data *ctx)
+{
+ int ret;
+ u8 cc1, cc2;
+ struct device *dev = &ctx->spi_client->dev;
+
+ ret = anx7411_reg_write(ctx->spi_client, OCM_CTRL_0,
+ anx7411_reg_read(ctx->spi_client, OCM_CTRL_0) |
+ OCM_RESET);
+ ret |= anx7411_reg_write(ctx->tcpc_client, ANALOG_CTRL_10, 0x80);
+ /* Set TCPC to RD and DRP enable */
+ cc1 = TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC1_SHIFT;
+ cc2 = TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC2_SHIFT;
+ ret |= anx7411_reg_write(ctx->tcpc_client, TCPC_ROLE_CTRL,
+ TCPC_ROLE_CTRL_DRP | cc1 | cc2);
+
+ /* Send DRP toggle command */
+ ret |= anx7411_reg_write(ctx->tcpc_client, TCPC_COMMAND,
+ TCPC_CMD_LOOK4CONNECTION);
+
+ /* Send TCPC enter standby command */
+ ret |= anx7411_reg_write(ctx->tcpc_client,
+ TCPC_COMMAND, TCPC_CMD_I2C_IDLE);
+ if (ret)
+ dev_err(dev, "Chip standby failed\n");
+}
+
+static void anx7411_work_func(struct work_struct *work)
+{
+ int ret;
+ u8 buf[STATUS_LEN];
+ u8 int_change; /* Interrupt change */
+ u8 int_status; /* Firmware status update */
+ u8 alert0, alert1; /* Interrupt alert source */
+ struct anx7411_data *ctx = container_of(work, struct anx7411_data, work);
+ struct device *dev = &ctx->spi_client->dev;
+
+ mutex_lock(&ctx->lock);
+
+ /* Read interrupt change status */
+ ret = anx7411_reg_block_read(ctx->spi_client, INT_STS, STATUS_LEN, buf);
+ if (ret < 0) {
+ /* Power standby mode, just return */
+ goto unlock;
+ }
+ int_change = buf[0];
+ int_status = buf[1];
+
+ /* Read alert register */
+ ret = anx7411_reg_block_read(ctx->tcpc_client, ALERT_0, STATUS_LEN, buf);
+ if (ret < 0)
+ goto unlock;
+
+ alert0 = buf[0];
+ alert1 = buf[1];
+
+ /* Clear interrupt and alert status */
+ ret = anx7411_reg_write(ctx->spi_client, INT_STS, 0);
+ ret |= anx7411_reg_write(ctx->tcpc_client, ALERT_0, alert0);
+ ret |= anx7411_reg_write(ctx->tcpc_client, ALERT_1, alert1);
+ if (ret)
+ goto unlock;
+
+ if (alert1 & INTP_POW_OFF) {
+ anx7411_partner_unregister_altmode(ctx);
+ anx7411_set_usb_role(ctx, USB_ROLE_NONE);
+ anx7411_unregister_partner(ctx);
+ ctx->psy_online = ANX7411_PSY_OFFLINE;
+ ctx->usb_type = POWER_SUPPLY_USB_TYPE_C;
+ ctx->typec.request_voltage = 0;
+ ctx->typec.request_current = 0;
+ power_supply_changed(ctx->psy);
+ anx7411_chip_standby(ctx);
+ goto unlock;
+ }
+
+ if ((alert0 & SOFTWARE_INT) && (int_change & OCM_BOOT_UP)) {
+ if (anx7411_config(ctx))
+ dev_err(dev, "Config failed\n");
+ anx7411_data_role_detect(ctx);
+ anx7411_power_role_detect(ctx);
+ anx7411_set_mux(ctx, SELECT_PIN_ASSIGMENT_C);
+ }
+
+ if (alert0 & RECEIVED_MSG)
+ anx7411_process_cmd(ctx);
+
+ ret = (int_status & DATA_ROLE) ? TYPEC_HOST : TYPEC_DEVICE;
+ if (ctx->typec.data_role != ret)
+ anx7411_data_role_detect(ctx);
+
+ ret = (int_status & SINK_STATUS) ? TYPEC_SINK : TYPEC_SOURCE;
+ if (ctx->typec.power_role != ret)
+ anx7411_power_role_detect(ctx);
+
+ if ((alert0 & SOFTWARE_INT) && (int_change & CC_STATUS_CHANGE))
+ anx7411_cc_status_detect(ctx);
+
+unlock:
+ mutex_unlock(&ctx->lock);
+}
+
+static irqreturn_t anx7411_intr_isr(int irq, void *data)
+{
+ struct anx7411_data *ctx = (struct anx7411_data *)data;
+
+ queue_work(ctx->workqueue, &ctx->work);
+
+ return IRQ_HANDLED;
+}
+
+static int anx7411_register_i2c_dummy_clients(struct anx7411_data *ctx,
+ struct i2c_client *client)
+{
+ int i;
+ u8 spi_addr;
+
+ for (i = 0; i < sizeof(anx7411_i2c_addr); i++) {
+ if (client->addr == (anx7411_i2c_addr[i].tcpc_address >> 1)) {
+ spi_addr = anx7411_i2c_addr[i].spi_address >> 1;
+ ctx->spi_client = i2c_new_dummy_device(client->adapter,
+ spi_addr);
+ if (ctx->spi_client)
+ return 0;
+ }
+ }
+
+ dev_err(&client->dev, "unable to get SPI slave\n");
+ return -ENOMEM;
+}
+
+static void anx7411_port_unregister_altmodes(struct typec_altmode **adev)
+{
+ int i;
+
+ for (i = 0; i < MAX_ALTMODE; i++)
+ if (adev[i]) {
+ typec_unregister_altmode(adev[i]);
+ adev[i] = NULL;
+ }
+}
+
+static int anx7411_usb_mux_set(struct typec_mux_dev *mux,
+ struct typec_mux_state *state)
+{
+ struct anx7411_data *ctx = typec_mux_get_drvdata(mux);
+ struct device *dev = &ctx->spi_client->dev;
+ int has_dp;
+
+ has_dp = (state->alt && state->alt->svid == USB_TYPEC_DP_SID &&
+ state->alt->mode == USB_TYPEC_DP_MODE);
+ if (!has_dp)
+ dev_err(dev, "dp altmode not register\n");
+
+ return 0;
+}
+
+static int anx7411_usb_set_orientation(struct typec_switch_dev *sw,
+ enum typec_orientation orientation)
+{
+ /* No need set */
+
+ return 0;
+}
+
+static int anx7411_register_switch(struct anx7411_data *ctx,
+ struct device *dev,
+ struct fwnode_handle *fwnode)
+{
+ struct typec_switch_desc sw_desc = { };
+
+ sw_desc.fwnode = fwnode;
+ sw_desc.drvdata = ctx;
+ sw_desc.name = fwnode_get_name(fwnode);
+ sw_desc.set = anx7411_usb_set_orientation;
+
+ ctx->typec.typec_switch = typec_switch_register(dev, &sw_desc);
+ if (IS_ERR(ctx->typec.typec_switch)) {
+ dev_err(dev, "switch register failed\n");
+ return PTR_ERR(ctx->typec.typec_switch);
+ }
+
+ return 0;
+}
+
+static int anx7411_register_mux(struct anx7411_data *ctx,
+ struct device *dev,
+ struct fwnode_handle *fwnode)
+{
+ struct typec_mux_desc mux_desc = { };
+
+ mux_desc.fwnode = fwnode;
+ mux_desc.drvdata = ctx;
+ mux_desc.name = fwnode_get_name(fwnode);
+ mux_desc.set = anx7411_usb_mux_set;
+
+ ctx->typec.typec_mux = typec_mux_register(dev, &mux_desc);
+ if (IS_ERR(ctx->typec.typec_mux)) {
+ dev_err(dev, "mux register failed\n");
+ return PTR_ERR(ctx->typec.typec_mux);
+ }
+
+ return 0;
+}
+
+static void anx7411_unregister_mux(struct anx7411_data *ctx)
+{
+ if (ctx->typec.typec_mux) {
+ typec_mux_unregister(ctx->typec.typec_mux);
+ ctx->typec.typec_mux = NULL;
+ }
+}
+
+static void anx7411_unregister_switch(struct anx7411_data *ctx)
+{
+ if (ctx->typec.typec_switch) {
+ typec_switch_unregister(ctx->typec.typec_switch);
+ ctx->typec.typec_switch = NULL;
+ }
+}
+
+static int anx7411_typec_switch_probe(struct anx7411_data *ctx,
+ struct device *dev)
+{
+ int ret;
+ struct device_node *node;
+
+ node = of_find_node_by_name(dev->of_node, "orientation_switch");
+ if (!node)
+ return 0;
+
+ ret = anx7411_register_switch(ctx, dev, &node->fwnode);
+ if (ret) {
+ dev_err(dev, "failed register switch");
+ return ret;
+ }
+
+ node = of_find_node_by_name(dev->of_node, "mode_switch");
+ if (!node) {
+ dev_err(dev, "no typec mux exist");
+ ret = -ENODEV;
+ goto unregister_switch;
+ }
+
+ ret = anx7411_register_mux(ctx, dev, &node->fwnode);
+ if (ret) {
+ dev_err(dev, "failed register mode switch");
+ ret = -ENODEV;
+ goto unregister_switch;
+ }
+
+ return 0;
+
+unregister_switch:
+ anx7411_unregister_switch(ctx);
+
+ return ret;
+}
+
+static int anx7411_typec_port_probe(struct anx7411_data *ctx,
+ struct device *dev)
+{
+ struct typec_capability *cap = &ctx->typec.caps;
+ struct typec_params *typecp = &ctx->typec;
+ struct fwnode_handle *fwnode;
+ const char *buf;
+ int ret, i;
+
+ fwnode = device_get_named_child_node(dev, "connector");
+ if (!fwnode)
+ return -EINVAL;
+
+ ret = fwnode_property_read_string(fwnode, "power-role", &buf);
+ if (ret) {
+ dev_err(dev, "power-role not found: %d\n", ret);
+ return ret;
+ }
+
+ ret = typec_find_port_power_role(buf);
+ if (ret < 0)
+ return ret;
+ cap->type = ret;
+
+ ret = fwnode_property_read_string(fwnode, "data-role", &buf);
+ if (ret) {
+ dev_err(dev, "data-role not found: %d\n", ret);
+ return ret;
+ }
+
+ ret = typec_find_port_data_role(buf);
+ if (ret < 0)
+ return ret;
+ cap->data = ret;
+
+ ret = fwnode_property_read_string(fwnode, "try-power-role", &buf);
+ if (ret) {
+ dev_err(dev, "try-power-role not found: %d\n", ret);
+ return ret;
+ }
+
+ ret = typec_find_power_role(buf);
+ if (ret < 0)
+ return ret;
+ cap->prefer_role = ret;
+
+ /* Get source pdos */
+ ret = fwnode_property_count_u32(fwnode, "source-pdos");
+ if (ret > 0) {
+ typecp->src_pdo_nr = min(ret, PDO_MAX_OBJECTS);
+ ret = fwnode_property_read_u32_array(fwnode, "source-pdos",
+ typecp->src_pdo,
+ typecp->src_pdo_nr);
+ if (ret < 0) {
+ dev_err(dev, "source cap validate failed: %d\n", ret);
+ return -EINVAL;
+ }
+
+ typecp->caps_flags |= HAS_SOURCE_CAP;
+ }
+
+ ret = fwnode_property_count_u32(fwnode, "sink-pdos");
+ if (ret > 0) {
+ typecp->sink_pdo_nr = min(ret, PDO_MAX_OBJECTS);
+ ret = fwnode_property_read_u32_array(fwnode, "sink-pdos",
+ typecp->sink_pdo,
+ typecp->sink_pdo_nr);
+ if (ret < 0) {
+ dev_err(dev, "sink cap validate failed: %d\n", ret);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < typecp->sink_pdo_nr; i++) {
+ ret = 0;
+ switch (pdo_type(typecp->sink_pdo[i])) {
+ case PDO_TYPE_FIXED:
+ ret = pdo_fixed_voltage(typecp->sink_pdo[i]);
+ break;
+ case PDO_TYPE_BATT:
+ case PDO_TYPE_VAR:
+ ret = pdo_max_voltage(typecp->sink_pdo[i]);
+ break;
+ case PDO_TYPE_APDO:
+ default:
+ ret = 0;
+ break;
+ }
+
+ /* 100mv per unit */
+ typecp->sink_voltage = max(5000, ret) / 100;
+ }
+
+ typecp->caps_flags |= HAS_SINK_CAP;
+ }
+
+ if (!fwnode_property_read_u32(fwnode, "op-sink-microwatt", &ret)) {
+ typecp->sink_watt = ret / 500000; /* 500mw per unit */
+ typecp->caps_flags |= HAS_SINK_WATT;
+ }
+
+ cap->fwnode = fwnode;
+
+ ctx->typec.role_sw = usb_role_switch_get(dev);
+ if (IS_ERR(ctx->typec.role_sw)) {
+ dev_err(dev, "USB role switch not found.\n");
+ ctx->typec.role_sw = NULL;
+ }
+
+ ctx->typec.port = typec_register_port(dev, cap);
+ if (IS_ERR(ctx->typec.port)) {
+ ret = PTR_ERR(ctx->typec.port);
+ ctx->typec.port = NULL;
+ dev_err(dev, "Failed to register type c port %d\n", ret);
+ return ret;
+ }
+
+ typec_port_register_altmodes(ctx->typec.port, NULL, ctx,
+ ctx->typec.port_amode,
+ MAX_ALTMODE);
+
+ return 0;
+}
+
+static int anx7411_typec_check_connection(struct anx7411_data *ctx)
+{
+ int ret;
+
+ ret = anx7411_reg_read(ctx->spi_client, FW_VER);
+ if (ret < 0)
+ return 0; /* No device attached in typec port */
+
+ /* Clear interrupt and alert status */
+ ret = anx7411_reg_write(ctx->spi_client, INT_STS, 0);
+ ret |= anx7411_reg_write(ctx->tcpc_client, ALERT_0, 0xFF);
+ ret |= anx7411_reg_write(ctx->tcpc_client, ALERT_1, 0xFF);
+ if (ret)
+ return ret;
+
+ anx7411_cc_status_detect(ctx);
+ anx7411_power_role_detect(ctx);
+ anx7411_data_role_detect(ctx);
+ anx7411_set_mux(ctx, SELECT_PIN_ASSIGMENT_C);
+
+ anx7411_send_msg(ctx, TYPE_GET_DP_ALT_ENTER, NULL, 0);
+ anx7411_send_msg(ctx, TYPE_GET_DP_DISCOVER_MODES_INFO, NULL, 0);
+
+ return 0;
+}
+
+static int __maybe_unused anx7411_runtime_pm_suspend(struct device *dev)
+{
+ struct anx7411_data *ctx = dev_get_drvdata(dev);
+
+ mutex_lock(&ctx->lock);
+
+ anx7411_partner_unregister_altmode(ctx);
+
+ if (ctx->typec.partner)
+ anx7411_unregister_partner(ctx);
+
+ mutex_unlock(&ctx->lock);
+
+ return 0;
+}
+
+static int __maybe_unused anx7411_runtime_pm_resume(struct device *dev)
+{
+ struct anx7411_data *ctx = dev_get_drvdata(dev);
+
+ mutex_lock(&ctx->lock);
+ /* Detect PD connection */
+ anx7411_typec_check_connection(ctx);
+
+ mutex_unlock(&ctx->lock);
+
+ return 0;
+}
+
+static const struct dev_pm_ops anx7411_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
+ SET_RUNTIME_PM_OPS(anx7411_runtime_pm_suspend,
+ anx7411_runtime_pm_resume, NULL)
+};
+
+static void anx7411_get_gpio_irq(struct anx7411_data *ctx)
+{
+ struct device *dev = &ctx->tcpc_client->dev;
+
+ ctx->intp_gpiod = devm_gpiod_get_optional(dev, "interrupt", GPIOD_IN);
+ if (!ctx->intp_gpiod) {
+ dev_err(dev, "no interrupt gpio property\n");
+ return;
+ }
+
+ ctx->intp_irq = gpiod_to_irq(ctx->intp_gpiod);
+ if (!ctx->intp_irq)
+ dev_err(dev, "failed to get GPIO IRQ\n");
+}
+
+static enum power_supply_usb_type anx7411_psy_usb_types[] = {
+ POWER_SUPPLY_USB_TYPE_C,
+ POWER_SUPPLY_USB_TYPE_PD,
+ POWER_SUPPLY_USB_TYPE_PD_PPS,
+};
+
+static enum power_supply_property anx7411_psy_props[] = {
+ POWER_SUPPLY_PROP_USB_TYPE,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_MAX,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+static int anx7411_psy_set_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct anx7411_data *ctx = power_supply_get_drvdata(psy);
+ int ret = 0;
+
+ if (psp == POWER_SUPPLY_PROP_ONLINE)
+ ctx->psy_online = val->intval;
+ else
+ ret = -EINVAL;
+
+ power_supply_changed(ctx->psy);
+ return ret;
+}
+
+static int anx7411_psy_prop_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ return psp == POWER_SUPPLY_PROP_ONLINE;
+}
+
+static int anx7411_psy_get_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct anx7411_data *ctx = power_supply_get_drvdata(psy);
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_USB_TYPE:
+ val->intval = ctx->usb_type;
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = ctx->psy_online;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+ val->intval = (ctx->psy_online) ?
+ ctx->typec.request_voltage * 1000 : 0;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ val->intval = (ctx->psy_online) ?
+ ctx->typec.request_current * 1000 : 0;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static int anx7411_psy_register(struct anx7411_data *ctx)
+{
+ struct power_supply_desc *psy_desc = &ctx->psy_desc;
+ struct power_supply_config psy_cfg = {};
+ char *psy_name;
+
+ psy_name = devm_kasprintf(ctx->dev, GFP_KERNEL, "anx7411-source-psy-%s",
+ dev_name(ctx->dev));
+ if (!psy_name)
+ return -ENOMEM;
+
+ psy_desc->name = psy_name;
+ psy_desc->type = POWER_SUPPLY_TYPE_USB;
+ psy_desc->usb_types = anx7411_psy_usb_types;
+ psy_desc->num_usb_types = ARRAY_SIZE(anx7411_psy_usb_types);
+ psy_desc->properties = anx7411_psy_props,
+ psy_desc->num_properties = ARRAY_SIZE(anx7411_psy_props),
+
+ psy_desc->get_property = anx7411_psy_get_prop,
+ psy_desc->set_property = anx7411_psy_set_prop,
+ psy_desc->property_is_writeable = anx7411_psy_prop_writeable,
+
+ ctx->usb_type = POWER_SUPPLY_USB_TYPE_C;
+ ctx->psy = devm_power_supply_register(ctx->dev, psy_desc, &psy_cfg);
+
+ if (IS_ERR(ctx->psy))
+ dev_warn(ctx->dev, "unable to register psy\n");
+
+ return PTR_ERR_OR_ZERO(ctx->psy);
+}
+
+static int anx7411_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct anx7411_data *plat;
+ struct device *dev = &client->dev;
+ int ret;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
+ return -ENODEV;
+
+ plat = devm_kzalloc(dev, sizeof(*plat), GFP_KERNEL);
+ if (!plat)
+ return -ENOMEM;
+
+ plat->tcpc_client = client;
+ i2c_set_clientdata(client, plat);
+
+ mutex_init(&plat->lock);
+
+ ret = anx7411_register_i2c_dummy_clients(plat, client);
+ if (ret) {
+ dev_err(dev, "fail to reserve I2C bus\n");
+ return ret;
+ }
+
+ ret = anx7411_typec_switch_probe(plat, dev);
+ if (ret) {
+ dev_err(dev, "fail to probe typec switch\n");
+ goto free_i2c_dummy;
+ }
+
+ ret = anx7411_typec_port_probe(plat, dev);
+ if (ret) {
+ dev_err(dev, "fail to probe typec property.\n");
+ ret = -ENODEV;
+ goto free_typec_switch;
+ }
+
+ plat->intp_irq = client->irq;
+ if (!client->irq)
+ anx7411_get_gpio_irq(plat);
+
+ if (!plat->intp_irq) {
+ dev_err(dev, "fail to get interrupt IRQ\n");
+ goto free_typec_port;
+ }
+
+ plat->dev = dev;
+ plat->psy_online = ANX7411_PSY_OFFLINE;
+ anx7411_psy_register(plat);
+
+ INIT_WORK(&plat->work, anx7411_work_func);
+ plat->workqueue = alloc_workqueue("anx7411_work",
+ WQ_FREEZABLE |
+ WQ_MEM_RECLAIM,
+ 1);
+ if (!plat->workqueue) {
+ dev_err(dev, "fail to create work queue\n");
+ ret = -ENOMEM;
+ goto free_typec_port;
+ }
+
+ ret = devm_request_threaded_irq(dev, plat->intp_irq,
+ NULL, anx7411_intr_isr,
+ IRQF_TRIGGER_FALLING |
+ IRQF_ONESHOT,
+ "anx7411-intp", plat);
+ if (ret) {
+ dev_err(dev, "fail to request irq\n");
+ goto free_wq;
+ }
+
+ anx7411_typec_check_connection(plat);
+
+ pm_runtime_enable(dev);
+
+ return 0;
+
+free_wq:
+ destroy_workqueue(plat->workqueue);
+
+free_typec_port:
+ typec_unregister_port(plat->typec.port);
+ anx7411_port_unregister_altmodes(plat->typec.port_amode);
+
+free_typec_switch:
+ anx7411_unregister_switch(plat);
+ anx7411_unregister_mux(plat);
+
+free_i2c_dummy:
+ i2c_unregister_device(plat->spi_client);
+
+ return ret;
+}
+
+static int anx7411_i2c_remove(struct i2c_client *client)
+{
+ struct anx7411_data *plat = i2c_get_clientdata(client);
+
+ anx7411_partner_unregister_altmode(plat);
+ anx7411_unregister_partner(plat);
+
+ if (plat->workqueue)
+ destroy_workqueue(plat->workqueue);
+
+ if (plat->spi_client)
+ i2c_unregister_device(plat->spi_client);
+
+ if (plat->typec.role_sw)
+ usb_role_switch_put(plat->typec.role_sw);
+
+ anx7411_unregister_mux(plat);
+
+ anx7411_unregister_switch(plat);
+
+ if (plat->typec.port)
+ typec_unregister_port(plat->typec.port);
+
+ anx7411_port_unregister_altmodes(plat->typec.port_amode);
+
+ return 0;
+}
+
+static const struct i2c_device_id anx7411_id[] = {
+ {"anx7411", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, anx7411_id);
+
+static const struct of_device_id anx_match_table[] = {
+ {.compatible = "analogix,anx7411",},
+ {},
+};
+
+static struct i2c_driver anx7411_driver = {
+ .driver = {
+ .name = "anx7411",
+ .of_match_table = anx_match_table,
+ .pm = &anx7411_pm_ops,
+ },
+ .probe = anx7411_i2c_probe,
+ .remove = anx7411_i2c_remove,
+
+ .id_table = anx7411_id,
+};
+
+module_i2c_driver(anx7411_driver);
+
+MODULE_DESCRIPTION("Anx7411 USB Type-C PD driver");
+MODULE_AUTHOR("Xin Ji <xji@analogixsemi.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION("0.1.5");
--
2.25.1
\
 
 \ /
  Last update: 2022-07-05 07:38    [W:0.087 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site