lkml.org 
[lkml]   [2022]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[V5 1/2] dt-bindings: remoteproc: qcom: Convert SC7280 MSS bindings to YAML
Date
Add a separate YAML binding to act as a superset of the PAS and non-PAS
compatible for SC7280 MSS PIL. This also serves as a way to increase
readability.

Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
---

Depends on Krzysztof's remoteproc cleanups and improvements:
https://patchwork.kernel.org/project/linux-arm-msm/cover/20220517070113.18023-1-krzysztof.kozlowski@linaro.org/

Previous discussions on PAS vs non-PAS bindings:
https://lore.kernel.org/lkml/YUps1JfGtf6JdbCx@ripper/ [Bjorn]
https://lore.kernel.org/lkml/CAE-0n51KBYjZvwGNy06_okmEWjEfRLQO54CYaY6-JnbBk6kOhA@mail.gmail.com/ [Stephen]

v5:
* Improve phandle-array schemas [Stephen/Rob/Krzysztof]
* Add more details to the firmware-name/memory region string array [Stephen/Rob]
* Drop 'items' from label [Rob]

v4:
* Remove older bindings [Matthias/Krzysztof]
* Misc. Fixes [Krzysztof]
* Rebased on v2 of Krzysztof's bindings cleanups

v3:
* Re-ordered clock list, fixed pdc_sync typo [Rob/Matthias]

.../devicetree/bindings/remoteproc/qcom,q6v5.txt | 31 +--
.../bindings/remoteproc/qcom,sc7280-mss-pil.yaml | 266 +++++++++++++++++++++
2 files changed, 268 insertions(+), 29 deletions(-)
create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
index b677900b3aae..1ec9093c3a82 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -15,7 +15,6 @@ on the Qualcomm Hexagon core.
"qcom,msm8996-mss-pil"
"qcom,msm8998-mss-pil"
"qcom,sc7180-mss-pil"
- "qcom,sc7280-mss-pil"
"qcom,sdm845-mss-pil"

- reg:
@@ -48,7 +47,6 @@ on the Qualcomm Hexagon core.
qcom,msm8996-mss-pil:
qcom,msm8998-mss-pil:
qcom,sc7180-mss-pil:
- qcom,sc7280-mss-pil:
qcom,sdm845-mss-pil:
must be "wdog", "fatal", "ready", "handover", "stop-ack",
"shutdown-ack"
@@ -89,8 +87,6 @@ on the Qualcomm Hexagon core.
qcom,sc7180-mss-pil:
must be "iface", "bus", "xo", "snoc_axi", "mnoc_axi",
"nav"
- qcom,sc7280-mss-pil:
- must be "iface", "xo", "snoc_axi", "offline", "pka"
qcom,sdm845-mss-pil:
must be "iface", "bus", "mem", "xo", "gpll0_mss",
"snoc_axi", "mnoc_axi", "prng"
@@ -102,7 +98,7 @@ on the Qualcomm Hexagon core.
reference to the list of 3 reset-controllers for the
wcss sub-system
reference to the list of 2 reset-controllers for the modem
- sub-system on SC7180, SC7280, SDM845 SoCs
+ sub-system on SC7180, SDM845 SoCs

- reset-names:
Usage: required
@@ -111,7 +107,7 @@ on the Qualcomm Hexagon core.
must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset"
for the wcss sub-system
must be "mss_restart", "pdc_reset" for the modem
- sub-system on SC7180, SC7280, SDM845 SoCs
+ sub-system on SC7180, SDM845 SoCs

For devices where the mba and mpss sub-nodes are not specified, mba/mpss region
should be referenced as follows:
@@ -178,8 +174,6 @@ For the compatible string below the following supplies are required:
must be "cx", "mx"
qcom,sc7180-mss-pil:
must be "cx", "mx", "mss"
- qcom,sc7280-mss-pil:
- must be "cx", "mss"
qcom,sdm845-mss-pil:
must be "cx", "mx", "mss"

@@ -205,9 +199,6 @@ For the compatible string below the following supplies are required:
Definition: a phandle reference to a syscon representing TCSR followed
by the three offsets within syscon for q6, modem and nc
halt registers.
- a phandle reference to a syscon representing TCSR followed
- by the four offsets within syscon for q6, modem, nc and vq6
- halt registers on SC7280 SoCs.

For the compatible strings below the following phandle references are required:
"qcom,sc7180-mss-pil"
@@ -218,24 +209,6 @@ For the compatible strings below the following phandle references are required:
by the offset within syscon for conn_box_spare0 register
used by the modem sub-system running on SC7180 SoC.

-For the compatible strings below the following phandle references are required:
- "qcom,sc7280-mss-pil"
-- qcom,ext-regs:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: two phandle references to syscons representing TCSR_REG and
- TCSR register space followed by the two offsets within the syscon
- to force_clk_en/rscc_disable and axim1_clk_off/crypto_clk_off
- registers respectively.
-
-- qcom,qaccept-regs:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: a phandle reference to a syscon representing TCSR followed
- by the three offsets within syscon for mdm, cx and axi
- qaccept registers used by the modem sub-system running on
- SC7280 SoC.
-
The Hexagon node must contain iommus property as described in ../iommu/iommu.txt
on platforms which do not have TrustZone.

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml
new file mode 100644
index 000000000000..da1a5de3d38b
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml
@@ -0,0 +1,266 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sc7280-mss-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7280 MSS Peripheral Image Loader
+
+maintainers:
+ - Sibi Sankar <quic_sibis@quicinc.com>
+
+description:
+ This document describes the hardware for a component that loads and boots firmware
+ on the Qualcomm Technology Inc. SC7280 Modem Hexagon Core.
+
+properties:
+ compatible:
+ enum:
+ - qcom,sc7280-mss-pil
+
+ reg:
+ items:
+ - description: MSS QDSP6 registers
+ - description: RMB registers
+
+ reg-names:
+ items:
+ - const: qdsp6
+ - const: rmb
+
+ iommus:
+ items:
+ - description: MSA Stream 1
+ - description: MSA Stream 2
+
+ interconnects:
+ items:
+ - description: Path leading to system memory
+
+ interrupts:
+ items:
+ - description: Watchdog interrupt
+ - description: Fatal interrupt
+ - description: Ready interrupt
+ - description: Handover interrupt
+ - description: Stop acknowledge interrupt
+ - description: Shutdown acknowledge interrupt
+
+ interrupt-names:
+ items:
+ - const: wdog
+ - const: fatal
+ - const: ready
+ - const: handover
+ - const: stop-ack
+ - const: shutdown-ack
+
+ clocks:
+ items:
+ - description: GCC MSS IFACE clock
+ - description: GCC MSS OFFLINE clock
+ - description: GCC MSS SNOC_AXI clock
+ - description: RPMH PKA clock
+ - description: RPMH XO clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: offline
+ - const: snoc_axi
+ - const: pka
+ - const: xo
+
+ power-domains:
+ items:
+ - description: CX power domain
+ - description: MSS power domain
+
+ power-domain-names:
+ items:
+ - const: cx
+ - const: mss
+
+ resets:
+ items:
+ - description: AOSS restart
+ - description: PDC reset
+
+ reset-names:
+ items:
+ - const: mss_restart
+ - const: pdc_reset
+
+ memory-region:
+ items:
+ - description: MBA reserved region
+ - description: modem reserved region
+
+ firmware-name:
+ $ref: /schemas/types.yaml#/definitions/string-array
+ items:
+ - description: Name of MBA firmware
+ - description: Name of modem firmware
+
+ qcom,halt-regs:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ Halt registers are used to halt transactions of various sub-components
+ within MSS.
+ items:
+ - items:
+ - description: phandle to TCSR_MUTEX registers
+ - description: offset to the Q6 halt register
+ - description: offset to the modem halt register
+ - description: offset to the nc halt register
+ - description: offset to the vq6 halt register
+
+ qcom,ext-regs:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: EXT registers are used for various power related functionality
+ items:
+ - items:
+ - description: phandle to TCSR_REG registers
+ - description: offset to the force_clk_en register
+ - description: offset to the rscc_disable register
+ - items:
+ - description: phandle to TCSR_MUTEX registers
+ - description: offset to the axim1_clk_off register
+ - description: offset to the crypto_clk_off register
+
+ qcom,qaccept-regs:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: QACCEPT registers are used to bring up/down Q-channels
+ items:
+ - items:
+ - description: phandle to TCSR_MUTEX registers
+ - description: offset to the mdm qaccept register
+ - description: offset to the cx qaccept register
+ - description: offset to the axi qaccept register
+
+ qcom,qmp:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Reference to the AOSS side-channel message RAM.
+
+ qcom,smem-states:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: States used by the AP to signal the Hexagon core
+ items:
+ - description: Stop the modem
+
+ qcom,smem-state-names:
+ description: The names of the state bits used for SMP2P output
+ const: stop
+
+ glink-edge:
+ $ref: qcom,glink-edge.yaml#
+ description:
+ Qualcomm G-Link subnode which represents communication edge, channels
+ and devices related to the DSP.
+
+ properties:
+ interrupts:
+ items:
+ - description: IRQ from MSS to GLINK
+
+ mboxes:
+ items:
+ - description: Mailbox for communication between APPS and MSS
+
+ label:
+ const: modem
+
+ apr: false
+ fastrpc: false
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - iommus
+ - interconnects
+ - interrupts
+ - interrupt-names
+ - clocks
+ - clock-names
+ - power-domains
+ - power-domain-names
+ - resets
+ - reset-names
+ - qcom,halt-regs
+ - qcom,ext-regs
+ - qcom,qaccept-regs
+ - memory-region
+ - qcom,qmp
+ - qcom,smem-states
+ - qcom,smem-state-names
+ - glink-edge
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interconnect/qcom,sc7280.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/mailbox/qcom-ipcc.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+ #include <dt-bindings/reset/qcom,sdm845-aoss.h>
+ #include <dt-bindings/reset/qcom,sdm845-pdc.h>
+
+ remoteproc_mpss: remoteproc@4080000 {
+ compatible = "qcom,sc7280-mss-pil";
+ reg = <0x04080000 0x10000>, <0x04180000 0x48>;
+ reg-names = "qdsp6", "rmb";
+
+ iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
+
+ interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
+
+ interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+
+ interrupt-names = "wdog", "fatal", "ready", "handover",
+ "stop-ack", "shutdown-ack";
+
+ clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+ <&gcc GCC_MSS_OFFLINE_AXI_CLK>,
+ <&gcc GCC_MSS_SNOC_AXI_CLK>,
+ <&rpmhcc RPMH_PKA_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "offline", "snoc_axi", "pka", "xo";
+
+ power-domains = <&rpmhpd SC7280_CX>,
+ <&rpmhpd SC7280_MSS>;
+ power-domain-names = "cx", "mss";
+
+ memory-region = <&mba_mem>, <&mpss_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&modem_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
+ <&pdc_reset PDC_MODEM_SYNC_RESET>;
+ reset-names = "mss_restart", "pdc_reset";
+
+ qcom,halt-regs = <&tcsr_mutex 0x23000 0x25000 0x28000 0x33000>;
+ qcom,ext-regs = <&tcsr 0x10000 0x10004>, <&tcsr_mutex 0x26004 0x26008>;
+ qcom,qaccept-regs = <&tcsr_mutex 0x23030 0x23040 0x23020>;
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+ label = "modem";
+ qcom,remote-pid = <1>;
+ };
+ };
--
2.7.4
\
 
 \ /
  Last update: 2022-07-05 13:33    [W:1.767 / U:0.836 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site