lkml.org 
[lkml]   [2022]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] leds: Add support for Turris 1.x LEDs
On Tuesday 05 July 2022 12:37:05 Marek Behún wrote:
> On Tue, 5 Jul 2022 02:04:48 +0200
> Pali Rohár <pali@kernel.org> wrote:
>
> > This adds support for the RGB LEDs found on the front panel of the
> > Turris 1.x routers. There are 8 RGB LEDs that are controlled by
> > CZ.NIC CPLD firmware running on Lattice FPGA.
> >
> > CPLD firmware provides HW triggering mode for all LEDs except WiFi LED
> > which is automatically enabled after power on reset. LAN LEDs share HW
> > registers for RGB colors settings, so it is not possible to set different
> > colors for individual LAN LEDs.
> >
> > CZ.NIC CPLD firmware is open source and available at:
> > https://gitlab.nic.cz/turris/hw/turris_cpld/-/blob/master/CZ_NIC_Router_CPLD.v
> >
> > This driver uses the multicolor LED framework and HW led triggers.
> >
> > Signed-off-by: Pali Rohár <pali@kernel.org>
> > ---
> > .../testing/sysfs-class-led-driver-turris1x | 23 +
> > drivers/leds/Kconfig | 9 +
> > drivers/leds/Makefile | 1 +
> > drivers/leds/leds-turris-1x.c | 412 ++++++++++++++++++
> > 4 files changed, 445 insertions(+)
> > create mode 100644 Documentation/ABI/testing/sysfs-class-led-driver-turris1x
> > create mode 100644 drivers/leds/leds-turris-1x.c
> >
> > diff --git a/Documentation/ABI/testing/sysfs-class-led-driver-turris1x b/Documentation/ABI/testing/sysfs-class-led-driver-turris1x
> > new file mode 100644
> > index 000000000000..02be9197554d
> > --- /dev/null
> > +++ b/Documentation/ABI/testing/sysfs-class-led-driver-turris1x
> > @@ -0,0 +1,23 @@
> > +What: /sys/class/leds/<led>/device/brightness
> > +Date: July 2022
> > +KernelVersion: 5.20
> > +Contact: Pali Rohár <pali@kernel.org>
> > +Description: (RW) On the back size of the Turris 1.x routers there is also
> > + a button which can be used to control the intensity of all the
> > + LEDs at once, so that if they are too bright, user can dim them.
> > +
> > + The CPLD firmware cycles between 8 levels of this global
> > + brightness (from 100% to 0%), but this setting can have any
> > + integer value between 0 and 255. It is therefore convenient to be
> > + able to change this setting from software.
> > +
> > + Format: %u
> > +
> > +What: /sys/class/leds/<led>/device/brightness_values
> > +Date: July 2022
> > +KernelVersion: 5.20
> > +Contact: Pali Rohár <pali@kernel.org>
> > +Description: (RW) Values of all 8 levels between which CPLD firmware cycles
> > + when brightness buffer is pressed.
>
> *button

OK.

> > + Format: %u %u %u %u %u %u %u %u
> > diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> > index a49979f41eee..71caf45c8ac3 100644
> > --- a/drivers/leds/Kconfig
> > +++ b/drivers/leds/Kconfig
> > @@ -157,6 +157,15 @@ config LEDS_EL15203000
> > To compile this driver as a module, choose M here: the module
> > will be called leds-el15203000.
> >
> > +config LEDS_TURRIS_1X
> > + tristate "LED support for CZ.NIC's Turris 1.x"
> > + depends on LEDS_CLASS_MULTICOLOR
> > + depends on OF
> > + select LEDS_TRIGGERS
> > + help
> > + This option enables support for LEDs found on the front side of
> > + CZ.NIC's Turris 1.x routers.
> > +
> > config LEDS_TURRIS_OMNIA
> > tristate "LED support for CZ.NIC's Turris Omnia"
> > depends on LEDS_CLASS_MULTICOLOR
> > diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> > index 4fd2f92cd198..de08083dbbca 100644
> > --- a/drivers/leds/Makefile
> > +++ b/drivers/leds/Makefile
> > @@ -82,6 +82,7 @@ obj-$(CONFIG_LEDS_TCA6507) += leds-tca6507.o
> > obj-$(CONFIG_LEDS_TI_LMU_COMMON) += leds-ti-lmu-common.o
> > obj-$(CONFIG_LEDS_TLC591XX) += leds-tlc591xx.o
> > obj-$(CONFIG_LEDS_TPS6105X) += leds-tps6105x.o
> > +obj-$(CONFIG_LEDS_TURRIS_1X) += leds-turris-1x.o
> > obj-$(CONFIG_LEDS_TURRIS_OMNIA) += leds-turris-omnia.o
> > obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o
> > obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
> > diff --git a/drivers/leds/leds-turris-1x.c b/drivers/leds/leds-turris-1x.c
> > new file mode 100644
> > index 000000000000..bd566f5210c7
> > --- /dev/null
> > +++ b/drivers/leds/leds-turris-1x.c
> > @@ -0,0 +1,412 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +// (C) 2022 Pali Rohár <pali@kernel.org>
> > +//
> > +// CZ.NIC's Turris 1.x LEDs driver, controlled by CPLD firmware:
> > +// https://gitlab.nic.cz/turris/hw/turris_cpld/-/blob/master/CZ_NIC_Router_CPLD.v
> > +
> > +#include <linux/i2c.h>
> > +#include <linux/led-class-multicolor.h>
> > +#include <linux/module.h>
> > +#include <linux/mutex.h>
> > +#include <linux/of.h>
> > +#include <linux/platform_device.h>
> > +#include "leds.h"
> > +
> > +/* LED registers starts at byte 0x13 in CPLD memory map */
> > +#define TURRIS1X_LED_REG_OFF(reg) ((reg)-0x13)
> > +
> > +/* LEDs 1-5 share common register for setting brightness */
> > +#define TURRIS1X_LED_BRIGHTNESS_OFF(idx) ({ const u8 _idx = (idx) & 7; \
> > + (_idx == 0) ? 0 : \
> > + (_idx <= 5) ? 1 : \
> > + (_idx - 4); })
> > +
> > +#define TURRIS1X_LED_BRIGHTNESS_REG(idx, color) TURRIS1X_LED_REG_OFF(0x13 + \
> > + 3 * TURRIS1X_LED_BRIGHTNESS_OFF(idx) + \
> > + ((color) & 3))
> > +#define TURRIS1X_LED_GLOBAL_LEVEL_REG TURRIS1X_LED_REG_OFF(0x20)
> > +#define TURRIS1X_LED_GET_GLOBAL_BRIGHTNESS_REG TURRIS1X_LED_REG_OFF(0x21)
> > +#define TURRIS1X_LED_SW_OVERRIDE_REG TURRIS1X_LED_REG_OFF(0x22)
> > +#define TURRIS1X_LED_SW_DISABLE_REG TURRIS1X_LED_REG_OFF(0x23)
> > +#define TURRIS1X_LED_GLOBAL_BRIGHTNESS_REG(lvl) TURRIS1X_LED_REG_OFF(0x28 + ((lvl) & 7))
> > +
> > +struct turris1x_led {
> > + struct led_classdev_mc mc_cdev;
> > + struct mc_subled subled_info[3];
> > + u32 reg;
> > + bool registered;
> > +};
> > +
> > +#define to_turris1x_led(l) container_of(l, struct turris1x_led, mc_cdev)
> > +
> > +struct turris1x_leds {
> > + void __iomem *regs;
> > + struct mutex lock;
> > + struct turris1x_led leds[8];
> > +};
> > +
> > +static struct led_hw_trigger_type turris1x_hw_trigger_type;
> > +
> > +static int turris1x_hwtrig_activate(struct led_classdev *cdev)
> > +{
> > + struct turris1x_leds *leds = dev_get_drvdata(cdev->dev->parent);
> > + struct turris1x_led *led = to_turris1x_led(lcdev_to_mccdev(cdev));
> > + u8 val;
> > +
> > + /* Disable software control of LED */
> > + mutex_lock(&leds->lock);
> > + val = readb(leds->regs + TURRIS1X_LED_SW_OVERRIDE_REG);
> > + val &= ~BIT(led->reg);
> > + writeb(val, leds->regs + TURRIS1X_LED_SW_OVERRIDE_REG);
> > + mutex_unlock(&leds->lock);
> > +
> > + return 0;
> > +}
> > +
> > +static void turris1x_hwtrig_deactivate(struct led_classdev *cdev)
> > +{
> > + struct turris1x_leds *leds = dev_get_drvdata(cdev->dev->parent);
> > + struct turris1x_led *led = to_turris1x_led(lcdev_to_mccdev(cdev));
> > + u8 val;
> > +
> > + /* Enable software control of LED */
> > + mutex_lock(&leds->lock);
> > + val = readb(leds->regs + TURRIS1X_LED_SW_OVERRIDE_REG);
> > + val |= BIT(led->reg);
> > + writeb(val, leds->regs + TURRIS1X_LED_SW_OVERRIDE_REG);
> > + mutex_unlock(&leds->lock);
> > +}
> > +
> > +static struct led_trigger turris1x_hw_trigger = {
> > + .name = "turris1x-cpld",
> > + .activate = turris1x_hwtrig_activate,
> > + .deactivate = turris1x_hwtrig_deactivate,
> > + .trigger_type = &turris1x_hw_trigger_type,
> > +};
> > +
> > +static enum led_brightness turris1x_led_brightness_get(struct led_classdev *cdev)
> > +{
> > + struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(cdev);
> > + struct turris1x_leds *leds = dev_get_drvdata(cdev->dev->parent);
> > + struct turris1x_led *led = to_turris1x_led(mc_cdev);
> > +
> > + if (!(readb(leds->regs + TURRIS1X_LED_SW_OVERRIDE_REG) & BIT(led->reg)))
> > + return LED_ON;
> > + else if (!(readb(leds->regs + TURRIS1X_LED_SW_DISABLE_REG) & BIT(led->reg)))
> > + return LED_ON;
> > + else
> > + return LED_OFF;
> > +}
>
> LED_ON and LED_OFF are deprecated, as says in include/linux/leds.h.
> Just return 0 or 1.

Ok!

> > +
> > +static int turris1x_led_brightness_set_blocking(struct led_classdev *cdev,
> > + enum led_brightness brightness)
> > +{
>
> The register write should be immediate, we don't need to use the
> _blocking variant here. On Omnia we need to, cause I2C is slow.

Ok! (I thought that usage of mutex is also blocking variant)

> > + struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(cdev);
> > + struct turris1x_leds *leds = dev_get_drvdata(cdev->dev->parent);
> > + struct turris1x_led *led = to_turris1x_led(mc_cdev);
> > + int i, j;
> > + u8 val;
> > +
> > + mutex_lock(&leds->lock);
> > +
> > + /* Set new brightness value for each color when LED is enabled */
> > + if (brightness == LED_ON) {
>
> if (brightness)
>
> So this will also make sure that I can change LED color by writing
> new color to multi_intensity and 1 to brightness, even if the LED is in
> HW control mode, am I correct?

This is for ability to disable LAN1 and enable LAN2, both in SW mode
which shares TURRIS1X_LED_BRIGHTNESS_REG register. Disabling LED cause
that mc_cdev->subled_info[0..3].brightness is 0.

> > + led_mc_calc_color_components(mc_cdev, brightness);
> > + for (i = 0; i < ARRAY_SIZE(led->subled_info); i++)
> > + writeb(mc_cdev->subled_info[i].brightness,
> > + leds->regs + TURRIS1X_LED_BRIGHTNESS_REG(led->reg, i));
> > +
> > + /*
> > + * LEDs 1-5 (LAN) share common color settings in same sets
> > + * of HW registers and therefore it is not possible to set
> > + * different colors. So when chaning color of one LED then
> > + * reflect color change for all of them.
> > + */
> > + if (led->reg >= 1 && led->reg <= 5) {
> > + for (j = 0; j < ARRAY_SIZE(leds->leds); j++) {
> > + if (leds->leds[j].reg < 1 ||
> > + leds->leds[j].reg > 5 ||
> > + leds->leds[j].reg == led->reg)
> > + continue;
> > + for (i = 0; i < ARRAY_SIZE(led->subled_info); i++)
> > + leds->leds[j].mc_cdev.subled_info[i].intensity =
> > + mc_cdev->subled_info[i].intensity;
> > + }
>
> I don't consider this a problem

I think it is a problem, to ensure that 'cat multi_intensity' for every
LAN led reports correct (= current) value. If you change multi_intensity
of LAN1 then color is changed for all LAN* but sysfs reports new value
only for LAN1 and old values for LAN2..5.

> but suppose that we are rewriting the
> other LEDs colors, and at the same time someone is reading from sysfs
> the multi_intensity file of a LED that is being rewritten. This can
> result in wrong value being read, right? But probably only on multi-core
> systems...

This is eventual inconsistency and I do not consider this as issue.
Moreover achieving eventual consistency here is probably not possible as
there is still some latency between "writeb" call and real reflection of
LED color on the hardware.

> > + }
> > + }
> > +
> > + /* Enable / disable LED for software control */
> > + val = readb(leds->regs + TURRIS1X_LED_SW_DISABLE_REG);
> > + if (brightness == LED_ON && (val & BIT(led->reg)))
> > + writeb(val & ~BIT(led->reg),
> > + leds->regs + TURRIS1X_LED_SW_DISABLE_REG);
> > + else if (brightness == LED_OFF && !(val & BIT(led->reg)))
> > + writeb(val | BIT(led->reg),
> > + leds->regs + TURRIS1X_LED_SW_DISABLE_REG);
>
> Pls just use brightness or !brightness.

Ok!

> Or maybe just write the value?
> Is the register write expensive on the CPLD or why are you trying to
> avoid it if unnecessary?

I just do not see any reason to do unnecessary writes.

> > + mutex_unlock(&leds->lock);
> > +
> > + return 0;
> > +}
> > +
> > +static int turris1x_led_register(struct device *dev, struct turris1x_leds *leds,
> > + struct device_node *np, u8 val_sw_override,
> > + u8 val_sw_disable)
> > +{
> > + struct led_init_data init_data = {};
> > + struct led_classdev *cdev;
> > + struct turris1x_led *led;
> > + int ret, color;
> > + u32 reg;
> > +
> > + ret = of_property_read_u32(np, "reg", &reg);
> > + if (ret || reg >= ARRAY_SIZE(leds->leds)) {
> > + dev_err(dev,
> > + "Node %pOF: must contain 'reg' property with values between 0 and %u\n",
> > + np, (unsigned int)ARRAY_SIZE(leds->leds)-1);
>
> Weird that checkpatch doesn't warn about spaces around the minus
> operator in ARRAY_SIZE()-1.
>
>
> > + return -EINVAL;
> > + }
> > +
> > + ret = of_property_read_u32(np, "color", &color);
> > + if (ret || color != LED_COLOR_ID_RGB) {
> > + dev_err(dev,
> > + "Node %pOF: must contain 'color' property with value LED_COLOR_ID_RGB\n",
> > + np);
> > + return -EINVAL;
> > + }
> > +
> > + led = &leds->leds[reg];
> > +
> > + if (led->registered) {
> > + dev_err(dev, "Node %pOF: duplicate 'reg' property %u\n",
> > + np, reg);
> > + return -EINVAL;
> > + }
> > +
> > + led->registered = true;
> > + led->reg = reg;
> > +
> > + led->subled_info[0].color_index = LED_COLOR_ID_RED;
> > + led->subled_info[0].intensity = 255;
> > + led->subled_info[0].channel = 0;
> > + led->subled_info[1].color_index = LED_COLOR_ID_GREEN;
> > + led->subled_info[1].intensity = 255;
> > + led->subled_info[1].channel = 1;
> > + led->subled_info[2].color_index = LED_COLOR_ID_BLUE;
> > + led->subled_info[2].intensity = 255;
> > + led->subled_info[2].channel = 2;
> > +
> > + led->mc_cdev.subled_info = led->subled_info;
> > + led->mc_cdev.num_colors = ARRAY_SIZE(led->subled_info);
> > +
> > + init_data.fwnode = &np->fwnode;
> > +
> > + cdev = &led->mc_cdev.led_cdev;
> > + cdev->max_brightness = LED_ON;
>
> s/LED_ON/1/
>
> > + cdev->brightness_get = turris1x_led_brightness_get;
> > + cdev->brightness_set_blocking = turris1x_led_brightness_set_blocking;
>
> See above about _blocking.
>
> > +
> > + /* All LEDs except LED 6 (WiFi) can be controller by hardware trigger */
> > + if (reg != 6)
> > + cdev->trigger_type = &turris1x_hw_trigger_type;
> > +
> > + /* Disable hardware trigger for LED 6 (WiFi) - allow software control */
> > + if (reg == 6 && !(val_sw_override & BIT(6))) {
> > + if (!(val_sw_disable & BIT(6))) {
> > + val_sw_disable |= BIT(6);
> > + writeb(val_sw_disable,
> > + leds->regs + TURRIS1X_LED_SW_DISABLE_REG);
> > + }
> > + val_sw_override |= BIT(6);
> > + writeb(val_sw_override,
> > + leds->regs + TURRIS1X_LED_SW_OVERRIDE_REG);
>
> Again, is the register write that expensive that you try to avoid it if
> the corresponding bit has the value you want?
>
> > + }
> > +
> > + if (!(val_sw_override & BIT(reg)))
> > + cdev->default_trigger = turris1x_hw_trigger.name;
> > +
> > + if (!(val_sw_override & BIT(reg)) || !(val_sw_disable & BIT(reg)))
> > + cdev->brightness = LED_ON;
>
> s/LED_ON/1/
>
> > + ret = devm_led_classdev_multicolor_register_ext(dev, &led->mc_cdev,
> > + &init_data);
> > + if (ret) {
> > + dev_err(dev, "Cannot register LED %pOF: %i\n", np, ret);
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static ssize_t brightness_show(struct device *dev, struct device_attribute *a,
> > + char *buf)
> > +{
> > + struct turris1x_leds *leds = dev_get_drvdata(dev);
> > + unsigned int brightness;
> > +
> > + /*
> > + * Current brightness value is available in read-only register
> > + * TURRIS1X_LED_GET_GLOBAL_BRIGHTNESS_REG. Equivalent code is:
> > + * level = readb(leds->regs + TURRIS1X_LED_GLOBAL_LEVEL_REG) & 7;
> > + * brightness = readb(leds->regs + TURRIS1X_LED_GLOBAL_BRIGHTNESS_REG(level));
> > + */
> > + brightness = readb(leds->regs + TURRIS1X_LED_GET_GLOBAL_BRIGHTNESS_REG);
> > +
> > + return sprintf(buf, "%u\n", brightness);
> > +}
> > +
> > +static ssize_t brightness_store(struct device *dev, struct device_attribute *a,
> > + const char *buf, size_t count)
> > +{
> > + struct turris1x_leds *leds = dev_get_drvdata(dev);
> > + int best_error, error, level, value;
> > + unsigned long brightness;
> > + u8 best_level;
> > +
> > + if (kstrtoul(buf, 10, &brightness))
> > + return -EINVAL;
> > +
> > + if (brightness > 255)
> > + return -EINVAL;
> > +
> > + /*
> > + * Brightness can be set only to one of 8 predefined value levels
> > + * available in TURRIS1X_LED_GLOBAL_BRIGHTNESS_REG(level) registers.
> > + * Choose level which has nearest value to the specified brightness.
> > + */
>
> Hmm. Wouldn't it make more sense to simply have the global brightness
> accept values from 0 to 7, instead of mapping it to 256 values? And
> call it something like selected_brightness_index?

All other drivers have brightness entry which operates on monotone
brightness property.

Brightness levels do not have to be monotone and by default are
decreasing: 0 = brightness with higher intensity; 7 = no intensity (off)

I cannot image who would like or prefer usage of such API.

Just stick with existing APIs. "brightness" entry takes intensity value
which is monotone, 0 the lowest, MAX (=255) the highest.

For setting individual level values I introduced a new entry
"brightness_values".

> > + best_level = 0;
> > + best_error = INT_MAX;
> > + for (level = 0; level < 8; level++) {
> > + value = readb(leds->regs +
> > + TURRIS1X_LED_GLOBAL_BRIGHTNESS_REG(level));
> > + error = abs(value - (int)brightness);
> > + if (best_error > error) {
> > + best_error = error;
> > + best_level = level;
> > + }
> > + }
> > +
> > + writeb(best_level, leds->regs + TURRIS1X_LED_GLOBAL_LEVEL_REG);
> > +
> > + return count;
> > +}
> > +static DEVICE_ATTR_RW(brightness);
> > +
> > +static ssize_t brightness_values_show(struct device *dev,
> > + struct device_attribute *a, char *buf)
> > +{
> > + struct turris1x_leds *leds = dev_get_drvdata(dev);
> > + unsigned int vals[8];
> > + int i;
> > +
> > + for (i = 0; i < 8; i++)
> > + vals[i] = readb(leds->regs +
> > + TURRIS1X_LED_GLOBAL_BRIGHTNESS_REG(i));
> > +
> > + return sprintf(buf, "%u %u %u %u %u %u %u %u\n", vals[0], vals[1],
> > + vals[2], vals[3], vals[4], vals[5], vals[6], vals[7]);
> > +}
> > +
> > +static ssize_t brightness_values_store(struct device *dev,
> > + struct device_attribute *a,
> > + const char *buf, size_t count)
> > +{
> > + struct turris1x_leds *leds = dev_get_drvdata(dev);
> > + unsigned int vals[8];
> > + int nchars;
> > + int i;
> > +
> > + if (sscanf(buf, "%u %u %u %u %u %u %u %u%n", &vals[0], &vals[1],
> > + &vals[2], &vals[3], &vals[4], &vals[5], &vals[6], &vals[7],
> > + &nchars) != 8 || nchars + 1 < count)
> > + return -EINVAL;
> > +
> > + for (i = 0; i < 8; i++)
> > + writeb(vals[i],
> > + leds->regs + TURRIS1X_LED_GLOBAL_BRIGHTNESS_REG(i));
> > +
> > + return count;
> > +}
> > +static DEVICE_ATTR_RW(brightness_values);
> > +
> > +static struct attribute *turris1x_leds_controller_attrs[] = {
> > + &dev_attr_brightness.attr,
> > + &dev_attr_brightness_values.attr,
> > + NULL,
> > +};
> > +ATTRIBUTE_GROUPS(turris1x_leds_controller);
> > +
> > +static int turris1x_leds_probe(struct platform_device *pdev)
> > +{
> > + struct device *dev = &pdev->dev;
> > + struct device_node *np = dev_of_node(dev);
> > + struct device_node *child;
> > + struct turris1x_leds *leds;
> > + struct resource *res;
> > + void __iomem *regs;
> > + u8 val_sw_override;
> > + u8 val_sw_disable;
> > + int ret;
> > +
> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + if (!res)
> > + return -ENODEV;
> > +
> > + regs = devm_ioremap_resource(dev, res);
> > + if (IS_ERR(regs))
> > + return PTR_ERR(regs);
> > +
> > + leds = devm_kzalloc(dev, sizeof(*leds), GFP_KERNEL);
> > + if (!leds)
> > + return -ENOMEM;
> > +
> > + platform_set_drvdata(pdev, leds);
> > +
> > + leds->regs = regs;
> > + mutex_init(&leds->lock);
> > +
> > + ret = devm_led_trigger_register(dev, &turris1x_hw_trigger);
> > + if (ret) {
> > + dev_err(dev, "Cannot register private LED trigger: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + val_sw_override = readb(leds->regs + TURRIS1X_LED_SW_OVERRIDE_REG);
> > + val_sw_disable = readb(leds->regs + TURRIS1X_LED_SW_DISABLE_REG);
> > +
> > + for_each_available_child_of_node(np, child) {
> > + ret = turris1x_led_register(dev, leds, child,
> > + val_sw_override, val_sw_disable);
> > + if (ret) {
> > + of_node_put(child);
> > + return ret;
> > + }
> > + }
> > +
> > + ret = devm_device_add_groups(dev, turris1x_leds_controller_groups);
> > + if (ret) {
> > + dev_err(dev, "Could not add attribute group!\n");
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static const struct of_device_id of_turris1x_leds_match[] = {
> > + { .compatible = "cznic,turris1x-leds" },
> > + {},
> > +};
> > +
> > +static struct platform_driver turris1x_leds_driver = {
> > + .probe = turris1x_leds_probe,
> > + .driver = {
> > + .name = "turris1x_leds",
> > + .of_match_table = of_turris1x_leds_match,
> > + },
> > +};
> > +module_platform_driver(turris1x_leds_driver);
> > +
> > +MODULE_AUTHOR("Pali Rohár <pali@kernel.org>");
> > +MODULE_DESCRIPTION("CZ.NIC's Turris 1.x LEDs");
> > +MODULE_LICENSE("GPL");
> > +MODULE_ALIAS("platform:turris1x_leds");
>

\
 
 \ /
  Last update: 2022-07-05 12:59    [W:0.273 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site