lkml.org 
[lkml]   [2022]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 17/43] dt-bindings: phy: qcom,qmp-pcie: add missing child node schema
From
On 05/07/2022 11:42, Johan Hovold wrote:
> Add the missing the description of the PHY-provider child node which was
> ignored when converting to DT schema.
>
> Also fix up the incorrect description that claimed that one child node
> per lane was required.
>
> Fixes: ccf51c1cedfd ("dt-bindings: phy: qcom,qmp: Convert QMP PHY bindings to yaml")
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> .../bindings/phy/qcom,qmp-pcie-phy.yaml | 88 ++++++++++++++++++-
> 1 file changed, 85 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml
> index ff1577f68a00..5a1ebf874559 100644
> --- a/Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml
> @@ -69,9 +69,37 @@ properties:
> patternProperties:
> "^phy@[0-9a-f]+$":
> type: object
> - description:
> - Each device node of QMP PHY is required to have as many child nodes as
> - the number of lanes the PHY has.
> + description: Single PHY-provider child node.
> + properties:
> + reg:
> + minItems: 3
> + maxItems: 6
> +
> + clocks:
> + items:
> + - description: PIPE clock
> +
> + clock-names:
> + items:
> + - const: pipe0
> +
> + "#clock-cells":
> + const: 0
> +
> + clock-output-names: true
> +
> + "#phy-cells":
> + const: 0
> +
> + required:
> + - reg
> + - clocks
> + - clock-names
> + - "#clock-cells"
> + - clock-output-names
> + - "#phy-cells"
> +
> + additionalProperties: false
>
> required:
> - compatible
> @@ -180,3 +208,57 @@ allOf:
> required:
> - vdda-phy-supply
> - vdda-pll-supply
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,sm8250-qmp-gen3x2-pcie-phy
> + - qcom,sm8250-qmp-modem-pcie-phy
> + - qcom,sm8450-qmp-gen4x2-pcie-phy
> + then:
> + patternProperties:
> + "^phy@[0-9a-f]+$":
> + properties:
> + reg:
> + items:
> + - description: TX lane 1
> + - description: RX lane 1
> + - description: PCS
> + - description: TX lane 2
> + - description: RX lane 2
> + - description: PCS_MISC
> + else:
> + patternProperties:
> + "^phy@[0-9a-f]+$":
> + properties:
> + reg:
> + minItems: 3
> + maxItems: 4
> + items:
> + - description: TX
> + - description: RX
> + - description: PCS
> + - description: PCS_MISC
> + if:

Do not include if within other if. Just split the entire section to its
own if:.


> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,ipq6018-qmp-pcie-phy
> + - qcom,ipq8074-qmp-pcie-phy
> + - qcom,msm8998-qmp-pcie-phy
> + - qcom,sdm845-qhp-pcie-phy
> + then:
> + patternProperties:
> + "^phy@[0-9a-f]+$":
> + properties:
> + reg:
> + maxItems: 3
> + else:
> + patternProperties:
> + "^phy@[0-9a-f]+$":
> + properties:
> + reg:
> + minItems: 4


Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-07-05 12:22    [W:0.319 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site