lkml.org 
[lkml]   [2022]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3] dt-bindings: qcom: document preferred compatible naming
Date
Compatibles can come in two formats.  Either "vendor,ip-soc" or
"vendor,soc-ip". Qualcomm bindings were mixing both of usages, so add a
DT schema file documenting preferred policy and enforcing it for all new
compatibles, except few existing patterns.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Changes since v2:
1. Narrow the expected pattern to be followed by dash '-' after model
number (msm8996-) or by two letters and a dash (sc8280xp-).
2. Add qcom,apss-wdt-xxx to list of exceptions.
3. Use comment instead of description in the oneOf list.

Changes since v1:
1. Add schema instead of readme (Rob).

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Alex Elder <elder@linaro.org>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
.../devicetree/bindings/arm/qcom-soc.yaml | 57 +++++++++++++++++++
1 file changed, 57 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/qcom-soc.yaml

diff --git a/Documentation/devicetree/bindings/arm/qcom-soc.yaml b/Documentation/devicetree/bindings/arm/qcom-soc.yaml
new file mode 100644
index 000000000000..6307c925335d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/qcom-soc.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/qcom-soc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoC compatibles naming convention
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+ Guidelines for new compatibles for SoC blocks/components.
+ When adding new compatibles in new bindings, use the format::
+ qcom,SoC-IP
+
+ For example::
+ qcom,sdm845-llcc-bwmon
+
+ When adding new compatibles to existing bindings, use the format in the
+ existing binding, even if it contradicts the above.
+
+select:
+ properties:
+ compatible:
+ pattern: "^qcom,.*(apq|ipq|mdm|msm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
+ required:
+ - compatible
+
+properties:
+ compatible:
+ oneOf:
+ # Preferred naming style for compatibles of SoC components:
+ - pattern: "^qcom,(apq|ipq|mdm|msm|qcs|sa|sc|sdm|sdx|sm)[0-9]+-.*$"
+ - pattern: "^qcom,(sa|sc)8[0-9]+[a-z][a-z]?-.*$"
+
+ # Legacy namings - variations of existing patterns/compatibles are OK,
+ # but do not add completely new entries to these:
+ - pattern: "^qcom,apss-wdt-(apq|ipq|mdm|msm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
+ - pattern: "^qcom,gcc-(apq|ipq|mdm|msm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
+ - pattern: "^qcom,mmcc-(apq|ipq|mdm|msm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
+ - pattern: "^qcom,pcie-(apq|ipq|mdm|msm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
+ - pattern: "^qcom,rpm-(apq|ipq|mdm|msm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
+ - pattern: "^qcom,scm-(apq|ipq|mdm|msm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
+ - enum:
+ - qcom,gpucc-sdm630
+ - qcom,gpucc-sdm660
+ - qcom,lcc-apq8064
+ - qcom,lcc-ipq8064
+ - qcom,lcc-mdm9615
+ - qcom,lcc-msm8960
+ - qcom,lpass-cpu-apq8016
+ - qcom,usb-ss-ipq4019-phy
+ - qcom,usb-hs-ipq4019-phy
+ - qcom,vqmmc-ipq4019-regulator
+
+additionalProperties: true
--
2.34.1
\
 
 \ /
  Last update: 2022-07-05 11:30    [W:0.032 / U:0.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site