lkml.org 
[lkml]   [2022]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v10 0/3] arm64: mvebu: Support for Marvell 98DX2530 (and variants)
Date

On 6/07/22 07:09, Vadym Kochan wrote:
> This series adds support for the Marvell 98DX2530 SoC which is the Control and
> Management CPU integrated into the AlleyCat5/AlleyCat5X series of Marvell
> switches.
>
> The CPU core is an ARM Cortex-A55 with neon, simd and crypto extensions.
>
> This is fairly similar to the Armada-3700 SoC so most of the required
> peripherals are already supported. This series adds a devicetree and pinctrl
> driver for the SoC and the RD-AC5X-32G16HVG6HLG reference board.
>
> The pinctrl changes from v4 have been picked up and are in linux-next so I
> haven't included them in this round. That leaves just the dts files and a minor
> Kconfig update for arm64.

Looks good to me.

I don't know if it's the done practice for a series I started but I've
just taken these for a spin on my board so

Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>

>
> Changes:
>
> v10:
> 1) Use different cnm clock for AC5 and AC5X DTSIs
>
> 2) Rename device-tree yaml binding to match the $id
>
> v9 (proposed by Marvell):
> It was discussed with Chris that Marvell will add some changes:
> 1) Rename "armada-" prefix in dts(i) file names to ac5, because
> Armada has not much common with AC5 SoC.
>
> 2) Add clock fixes:
> a) rename core_clock to cnm_clock
>
> b) remove axi_clock
>
> c) change cnm_clock to 325MHZ
>
> d) use cnm_clock for the UART
>
> Chris Packham (3):
> dt-bindings: marvell: Document the AC5/AC5X compatibles
> arm64: dts: marvell: Add Armada 98DX2530 SoC and RD-AC5X board
> arm64: marvell: enable the 98DX2530 pinctrl driver
>
> .../bindings/arm/marvell/marvell,ac5.yaml | 32 ++
> arch/arm64/Kconfig.platforms | 2 +
> arch/arm64/boot/dts/marvell/Makefile | 1 +
> arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi | 291 ++++++++++++++++++
> .../boot/dts/marvell/ac5-98dx35xx-rd.dts | 101 ++++++
> arch/arm64/boot/dts/marvell/ac5-98dx35xx.dtsi | 17 +
> 6 files changed, 444 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/marvell/marvell,ac5.yaml
> create mode 100644 arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
> create mode 100644 arch/arm64/boot/dts/marvell/ac5-98dx35xx-rd.dts
> create mode 100644 arch/arm64/boot/dts/marvell/ac5-98dx35xx.dtsi
>
\
 
 \ /
  Last update: 2022-07-05 23:05    [W:0.072 / U:1.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site