lkml.org 
[lkml]   [2022]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] PCI: Clear PCI_STATUS when setting up the device
On Tue, May 17, 2022 at 12:37:38PM +0800, Kai-Heng Feng wrote:
> We are seeing Master Abort bit is set on Intel I350 ethernet device and its
> root port right after boot, probably happened during BIOS phase:
>
> 00:06.0 PCI bridge [0604]: Intel Corporation Device [8086:464d] (rev 05) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
>
> 6e:00.0 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev 01)
> Subsystem: Intel Corporation Ethernet Server Adapter I350-T2 [8086:00a2]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
>
> 6e:00.1 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev 01)
> Subsystem: Intel Corporation Ethernet Server Adapter I350-T2 [8086:00a2]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
>
> And the Master Abort bit is cleared after S3.
>
> Since there's no functional impact found, clear the PCI_STATUS to treat
> it anew at setting up.
>
> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215989
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>

Applied to pci/err for v5.20, thanks!

> ---
> drivers/pci/probe.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index 17a969942d370..414f659dc8735 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -1890,6 +1890,9 @@ int pci_setup_device(struct pci_dev *dev)
>
> dev->broken_intx_masking = pci_intx_mask_broken(dev);
>
> + /* Clear errors left from system firmware */
> + pci_write_config_word(dev, PCI_STATUS, 0xffff);
> +
> switch (dev->hdr_type) { /* header type */
> case PCI_HEADER_TYPE_NORMAL: /* standard header */
> if (class == PCI_CLASS_BRIDGE_PCI)
> --
> 2.34.1
>

\
 
 \ /
  Last update: 2022-07-05 23:01    [W:0.066 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site