lkml.org 
[lkml]   [2022]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/5] clk: qcom: Drop use of pxo/cxo_board for rpm devices
Date
Trying to convert every driver used by ipq806x to parent_data api, I notice
RPM was still using pxo_board clk.

pxo and pxo_board are the same clock and are defined just to handle old
clock definition. It was discovered that rpm is the last driver using
pxo_board instead of pxo.

While updating the rpm driver I notice the documentation was also wrong,
so this series also fix that.

Christian Marangi (5):
dt-bindings: clock: fix wrong clock documentation for qcom,rpmcc
ARM: DTS: qcom: fix dtbs_check warning with new rpmcc clocks
clk: qcom: clk-rpm: convert to parent_data API
ARM: dts: qcom: add pxo/cxo clock-output-names for ipq8064
clk: qcom: gcc-ipq806x: remove cc_register_board for pxo and cxo

.../devicetree/bindings/clock/qcom,rpmcc.yaml | 77 ++++++++++++++++++-
arch/arm/boot/dts/qcom-apq8064.dtsi | 2 +
arch/arm/boot/dts/qcom-ipq8064.dtsi | 4 +
arch/arm/boot/dts/qcom-msm8660.dtsi | 4 +-
drivers/clk/qcom/clk-rpm.c | 24 ++++--
drivers/clk/qcom/gcc-ipq806x.c | 8 --
6 files changed, 98 insertions(+), 21 deletions(-)

--
2.36.1

\
 
 \ /
  Last update: 2022-07-05 22:57    [W:0.151 / U:0.384 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site