lkml.org 
[lkml]   [2022]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v4 05/14] dt-bindings: memory-controllers: add canaan k210 sram controller
Date


On 05/07/2022 20:28, Conor.Dooley@microchip.com wrote:
>
>
> On 05/07/2022 20:23, Rob Herring wrote:
>> On Fri, Jul 01, 2022 at 08:22:51PM +0100, Conor Dooley wrote:
>>> From: Conor Dooley <conor.dooley@microchip.com>
>>>
>>> The k210 U-Boot port has been using the clocks defined in the
>>> devicetree to bring up the board's SRAM, but this violates the
>>> dt-schema. As such, move the clocks to a dedicated node with
>>> the same compatible string & document it.
>>>
>>> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
>>> ---
>>> .../memory-controllers/canaan,k210-sram.yaml | 52 +++++++++++++++++++
>>> 1 file changed, 52 insertions(+)
>>> create mode 100644 Documentation/devicetree/bindings/memory-controllers/canaan,k210-sram.yaml
>>>
>>> diff --git a/Documentation/devicetree/bindings/memory-controllers/canaan,k210-sram.yaml b/Documentation/devicetree/bindings/memory-controllers/canaan,k210-sram.yaml
>>> new file mode 100644
>>> index 000000000000..82be32757713
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/memory-controllers/canaan,k210-sram.yaml
>>> @@ -0,0 +1,52 @@
>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/memory-controllers/canaan,k210-sram.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: Canaan K210 SRAM memory controller
>>> +
>>> +description: |
>>
>> Don't need '|'.
>>
>>> + The Canaan K210 SRAM memory controller is initialised and programmed by
>>> + firmware, but an OS might want to read its registers for error reporting
>>> + purposes and to learn about the DRAM topology.
>>
>> How the OS going to do that? You don't have any way defined to access
>> the registers.
>
> Eugh, copy paste. I'll rephrase in the respin. It should be "initialised by
> firmware." There are no registers, only clocks.

s/firmware/bootloader

>
>>
>> Also, where is the SRAM address itself defined?
>
> The actual sram is in the memory node.
>
>>
>>> +
>>> +maintainers:
>>> + - Conor Dooley <conor@kernel.org>
>>> +
>>> +properties:
>>> + compatible:
>>> + enum:
>>> + - canaan,k210-sram
>>> +
>>> + clocks:
>>> + minItems: 1
>>> + items:
>>> + - description: sram0 clock
>>> + - description: sram1 clock
>>> + - description: aisram clock
>>> +
>>> + clock-names:
>>> + minItems: 1
>>> + items:
>>> + - const: sram0
>>> + - const: sram1
>>> + - const: aisram
>>> +
>>> +required:
>>> + - compatible
>>> + - clocks
>>> + - clock-names
>>> +
>>> +additionalProperties: false
>>> +
>>> +examples:
>>> + - |
>>> + #include <dt-bindings/clock/k210-clk.h>
>>> + memory-controller {
>>> + compatible = "canaan,k210-sram";
>>> + clocks = <&sysclk K210_CLK_SRAM0>,
>>> + <&sysclk K210_CLK_SRAM1>,
>>> + <&sysclk K210_CLK_AI>;
>>> + clock-names = "sram0", "sram1", "aisram";
>>> + };
>>> --
>>> 2.37.0
>>>
>>>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
\
 
 \ /
  Last update: 2022-07-05 21:34    [W:0.107 / U:1.572 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site