lkml.org 
[lkml]   [2022]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] leds: Add support for Turris 1.x LEDs
On Tue,  5 Jul 2022 17:59:29 +0200
Pali Rohár <pali@kernel.org> wrote:

> This adds support for the RGB LEDs found on the front panel of the
> Turris 1.x routers. There are 8 RGB LEDs that are controlled by
> CZ.NIC CPLD firmware running on Lattice FPGA.
>
> CPLD firmware provides HW triggering mode for all LEDs except WiFi LED
> which is automatically enabled after power on reset. LAN LEDs share HW
> registers for RGB colors settings, so it is not possible to set different
> colors for individual LAN LEDs.
>
> CZ.NIC CPLD firmware is open source and available at:
> https://gitlab.nic.cz/turris/hw/turris_cpld/-/blob/master/CZ_NIC_Router_CPLD.v
>
> This driver uses the multicolor LED framework and HW led triggers.
>
> Signed-off-by: Pali Rohár <pali@kernel.org>

Reviewed-by: Marek Behún <kabel@kernel.org>

\
 
 \ /
  Last update: 2022-07-05 19:31    [W:0.142 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site