lkml.org 
[lkml]   [2022]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/6] crypto: sa2ul - Check engine status before enabling
Date
There is a engine status register that can be used to check if the
different HW crypto engines are enabled. Check that first and then only
try to enable the engines if they are not already on.

This has a couple benefits. First we don't need to use match_data for
this. Second, this driver can now work on HS devices where the engine
control registers are read-only and writing causes a firewall exception.

Signed-off-by: Andrew Davis <afd@ti.com>
---
drivers/crypto/sa2ul.c | 15 +++++++--------
drivers/crypto/sa2ul.h | 1 +
2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/crypto/sa2ul.c b/drivers/crypto/sa2ul.c
index 1d732113b81ec..f4bc06c24ad8f 100644
--- a/drivers/crypto/sa2ul.c
+++ b/drivers/crypto/sa2ul.c
@@ -86,7 +86,6 @@ struct sa_match_data {
u8 priv;
u8 priv_id;
u32 supported_algos;
- bool skip_engine_control;
};

static struct device *sa_k3_dev;
@@ -2380,7 +2379,6 @@ static struct sa_match_data am64_match_data = {
BIT(SA_ALG_SHA256) |
BIT(SA_ALG_SHA512) |
BIT(SA_ALG_AUTHENC_SHA256_AES),
- .skip_engine_control = true,
};

static const struct of_device_id of_match[] = {
@@ -2398,6 +2396,7 @@ static int sa_ul_probe(struct platform_device *pdev)
struct device_node *node = dev->of_node;
static void __iomem *saul_base;
struct sa_crypto_data *dev_data;
+ u32 status, val;
int ret;

dev_data = devm_kzalloc(dev, sizeof(*dev_data), GFP_KERNEL);
@@ -2434,13 +2433,13 @@ static int sa_ul_probe(struct platform_device *pdev)

spin_lock_init(&dev_data->scid_lock);

- if (!dev_data->match_data->skip_engine_control) {
- u32 val = SA_EEC_ENCSS_EN | SA_EEC_AUTHSS_EN | SA_EEC_CTXCACH_EN |
- SA_EEC_CPPI_PORT_IN_EN | SA_EEC_CPPI_PORT_OUT_EN |
- SA_EEC_TRNG_EN;
-
+ val = SA_EEC_ENCSS_EN | SA_EEC_AUTHSS_EN | SA_EEC_CTXCACH_EN |
+ SA_EEC_CPPI_PORT_IN_EN | SA_EEC_CPPI_PORT_OUT_EN |
+ SA_EEC_TRNG_EN;
+ status = readl_relaxed(saul_base + SA_ENGINE_STATUS);
+ /* Only enable engines if all are not already enabled */
+ if (val & ~status)
writel_relaxed(val, saul_base + SA_ENGINE_ENABLE_CONTROL);
- }

sa_register_algos(dev_data);

diff --git a/drivers/crypto/sa2ul.h b/drivers/crypto/sa2ul.h
index ed66d1f111db5..92bf97232a292 100644
--- a/drivers/crypto/sa2ul.h
+++ b/drivers/crypto/sa2ul.h
@@ -16,6 +16,7 @@
#include <crypto/sha1.h>
#include <crypto/sha2.h>

+#define SA_ENGINE_STATUS 0x0008
#define SA_ENGINE_ENABLE_CONTROL 0x1000

struct sa_tfm_ctx;
--
2.36.1
\
 
 \ /
  Last update: 2022-07-05 19:04    [W:0.205 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site