lkml.org 
[lkml]   [2022]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: [PATCH 08/14] perf test: Add memcpy thread test shell script
From


On 05/07/2022 15:25, James Clark wrote:
>
>
> On 01/07/2022 13:07, carsten.haitzler@foss.arm.com wrote:
>> From: "Carsten Haitzler (Rasterman)" <raster@rasterman.com>
>>
>> Add a script to drive the threaded memcpy test that gathers data so
>> it passes a minimum bar for amount and quality of content that we
>> extract from the kernel's perf support.
>>
>
> On this one I get a failure about 1/50 times on N1SDP (I ran it about 150
> times and saw 3 failures so it's quite consistent). Usually it records
> about a 1.4MB file with one aux record. But when it fails the file is
> only 20K and has one small aux record:
>
> 0 0 0x1a10 [0x30]: PERF_RECORD_AUXTRACE size: 0x1820 offset: 0 ref: 0x1c23126d7ff3d2ab idx: 3 tid: 682799 cpu: 3
>
> Nothing was dropped, and the load on the system wasn't any different
> to when it passes. So I'm not sure if this is a real coresight bug
> or that the test is flaky. There was a bug in SPE before where
> threads weren't followed after forking, but only very rarely. It feels
> a bit like that.
>
> It could also be some contention issue because 10 threads are launched
> but the machine only has 4 cores.
>
> The failure message from the test looks like this:
>
> 77: CoreSight / Memcpy 16k 10 Threads :
> --- start ---
> Couldn't synthesize bpf events.
> [ perf record: Woken up 1 times to write data ]
> [ perf record: Captured and wrote 0.012 MB ./perf-memcpy_thread-16k_10.data ]
> Sanity check number of ASYNC is too low (3 < 10)
> ---- end ----
> CoreSight / Memcpy 16k 10 Threads: FAILED!
>
> I didn't see this issue on any of the other tests. Sometimes very small
> files were made if I loaded the system, but the tests still passed.

Spoke too soon, same thing on another test with an unloaded system. It's
just a bit more rare:

80: CoreSight / Unroll Loop Thread 10 :
--- start ---
Couldn't synthesize bpf events.
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.041 MB ./perf-unroll_loop_thread-10.data ]
Sanity check number of ASYNC is too low (6 < 10)
---- end ----
CoreSight / Unroll Loop Thread 10: FAILED!

>
> Thanks
> James
>
>> Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
>> ---
>> .../shell/coresight/memcpy_thread_16k_10.sh | 18 ++++++++++++++++++
>> 1 file changed, 18 insertions(+)
>> create mode 100755 tools/perf/tests/shell/coresight/memcpy_thread_16k_10.sh
>>
>> diff --git a/tools/perf/tests/shell/coresight/memcpy_thread_16k_10.sh b/tools/perf/tests/shell/coresight/memcpy_thread_16k_10.sh
>> new file mode 100755
>> index 000000000000..d21ba8545938
>> --- /dev/null
>> +++ b/tools/perf/tests/shell/coresight/memcpy_thread_16k_10.sh
>> @@ -0,0 +1,18 @@
>> +#!/bin/sh -e
>> +# CoreSight / Memcpy 16k 10 Threads
>> +
>> +# SPDX-License-Identifier: GPL-2.0
>> +# Carsten Haitzler <carsten.haitzler@arm.com>, 2021
>> +
>> +TEST="memcpy_thread"
>> +. $(dirname $0)/../lib/coresight.sh
>> +ARGS="16 10 1"
>> +DATV="16k_10"
>> +DATA="$DATD/perf-$TEST-$DATV.data"
>> +
>> +perf record $PERFRECOPT -o "$DATA" "$BIN" $ARGS
>> +
>> +perf_dump_aux_verify "$DATA" 10 10 10
>> +
>> +err=$?
>> +exit $err
> _______________________________________________
> CoreSight mailing list -- coresight@lists.linaro.org
> To unsubscribe send an email to coresight-leave@lists.linaro.org
\
 
 \ /
  Last update: 2022-07-05 16:30    [W:0.078 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site