lkml.org 
[lkml]   [2022]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v15 2/3] phy: qcom-qmp: add regulator_set_load to dp phy
On 21-06-22, 10:01, Kuogee Hsieh wrote:
> This patch add regulator_set_load() before enable regulator at
> DP phy driver.
>
> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 43 ++++++++++++++++++++++++-------
> 1 file changed, 33 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> index 893b5a4..df62980 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> @@ -604,6 +604,18 @@ static const struct qmp_phy_init_tbl qmp_v4_dp_tx_tbl[] = {
> QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_EMP_POST1_LVL, 0x20),
> };
>
> +

this makes it double blank lines, pls remove

> +/* list of regulators */
> +struct qmp_regulator_data {
> + const char *name;
> + unsigned int enable_load;
> +};
> +
> +struct qmp_regulator_data qmp_phy_vreg_l[] = {
> + { .name = "vdda-phy", .enable_load = 21800 },
> + { .name = "vdda-pll", .enable_load = 36000 },
> +};
> +
> struct qmp_phy;
>
> /* struct qmp_phy_cfg - per-PHY initialization config */
> @@ -646,7 +658,7 @@ struct qmp_phy_cfg {
> const char * const *reset_list;
> int num_resets;
> /* regulators to be requested */
> - const char * const *vreg_list;
> + const struct qmp_regulator_data *vreg_list;
> int num_vregs;
>
> /* array of registers with different offsets */
> @@ -809,11 +821,6 @@ static const char * const sc7180_usb3phy_reset_l[] = {
> "phy",
> };
>
> -/* list of regulators */
> -static const char * const qmp_phy_vreg_l[] = {
> - "vdda-phy", "vdda-pll",
> -};
> -
> static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
> .type = PHY_TYPE_USB3,
> .nlanes = 1,
> @@ -1969,16 +1976,32 @@ static int qcom_qmp_phy_combo_vreg_init(struct device *dev, const struct qmp_phy
> {
> struct qcom_qmp *qmp = dev_get_drvdata(dev);
> int num = cfg->num_vregs;
> - int i;
> + int ret, i;
>
> qmp->vregs = devm_kcalloc(dev, num, sizeof(*qmp->vregs), GFP_KERNEL);
> if (!qmp->vregs)
> return -ENOMEM;
>
> for (i = 0; i < num; i++)
> - qmp->vregs[i].supply = cfg->vreg_list[i];
> -
> - return devm_regulator_bulk_get(dev, num, qmp->vregs);
> + qmp->vregs[i].supply = cfg->vreg_list[i].name;
> +
> + ret = devm_regulator_bulk_get(dev, num, qmp->vregs);
> + if (ret) {
> + dev_err(dev, "failed at devm_regulator_bulk_get\n");
> + return ret;
> + }
> +
> + for (i = 0; i < num; i++) {
> + ret = regulator_set_load(qmp->vregs[i].consumer,
> + cfg->vreg_list[i].enable_load);
> + if (ret) {
> + dev_err(dev, "failed to set load at %s\n",
> + qmp->vregs[i].supply);
> + return ret;
> + }
> + }
> +
> + return 0;

argh!
checkpatch says:
total: 15 errors, 25 warnings, 1 checks, 277 lines checked

Looks like all lines use spaces and not tabs :-(

Pls fix that and resend

--
~Vinod

\
 
 \ /
  Last update: 2022-07-05 09:21    [W:0.061 / U:2.892 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site