lkml.org 
[lkml]   [2022]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] usb: gadget: udc: atmel: convert to platform driver
Date
The driver won't probe on a LAN9668 because the pinctrl driver isn't
ready yet. Probe deferral is not supported because the init section
is already discarded. With fw_devlink enabled, the probe won't even
be called. Convert the driver to a proper platform driver.

Signed-off-by: Michael Walle <michael@walle.cc>
---
drivers/usb/gadget/udc/atmel_usba_udc.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 48355e0cee76..53ca38c4b3ec 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -2060,7 +2060,7 @@ static const struct usba_udc_errata at91sam9g45_errata = {
.pulse_bias = at91sam9g45_pulse_bias,
};

-static const struct usba_ep_config ep_config_sam9[] __initconst = {
+static const struct usba_ep_config ep_config_sam9[] = {
{ .nr_banks = 1 }, /* ep 0 */
{ .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 1 */
{ .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 2 */
@@ -2070,7 +2070,7 @@ static const struct usba_ep_config ep_config_sam9[] __initconst = {
{ .nr_banks = 3, .can_dma = 1, .can_isoc = 1 }, /* ep 6 */
};

-static const struct usba_ep_config ep_config_sama5[] __initconst = {
+static const struct usba_ep_config ep_config_sama5[] = {
{ .nr_banks = 1 }, /* ep 0 */
{ .nr_banks = 3, .can_dma = 1, .can_isoc = 1 }, /* ep 1 */
{ .nr_banks = 3, .can_dma = 1, .can_isoc = 1 }, /* ep 2 */
@@ -2449,6 +2449,7 @@ static int usba_udc_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(usba_udc_pm_ops, usba_udc_suspend, usba_udc_resume);

static struct platform_driver udc_driver = {
+ .probe = usba_udc_probe,
.remove = usba_udc_remove,
.driver = {
.name = "atmel_usba_udc",
@@ -2456,8 +2457,7 @@ static struct platform_driver udc_driver = {
.of_match_table = atmel_udc_dt_ids,
},
};
-
-module_platform_driver_probe(udc_driver, usba_udc_probe);
+module_platform_driver(udc_driver);

MODULE_DESCRIPTION("Atmel USBA UDC driver");
MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
--
2.30.2
\
 
 \ /
  Last update: 2022-07-05 15:51    [W:0.327 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site