lkml.org 
[lkml]   [2022]   [Jul]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 0/4] remoteproc: restructure the remoteproc VirtIO device
I have started reviewing this set.

Thanks,
Mathieu

On Fri, Jun 03, 2022 at 06:31:54PM +0200, Arnaud Pouliquen wrote:
> 1) Update from V5 [1]:
>
> Updates based on Mathieu's comments.
> Updates are listed in the commit message of each patch.
>
> [1] https://lkml.org/lkml/2022/4/6/597
>
> 2) Patchset description:
>
> This series is a part of the work initiated a long time ago in
> the series "remoteproc: Decorelate virtio from core"[2]
>
> Objective of the work:
> - Update the remoteproc VirtIO device creation (use platform device)
> - Allow to declare remoteproc VirtIO device in DT
> - declare resources associated to a remote proc VirtIO
> - declare a list of VirtIO supported by the platform.
> - Prepare the enhancement to more VirtIO devices (e.g I2C, audio, video, ...).
> For instance be able to declare a I2C device in a virtio-i2C node.
> - Keep the legacy working!
> - Try to improve the picture about concerns reported by Christoph Hellwing [3][4]
>
> [2] https://lkml.org/lkml/2020/4/16/1817
> [3] https://lkml.org/lkml/2021/6/23/607
> [4] https://patchwork.kernel.org/project/linux-remoteproc/patch/AOKowLclCbOCKxyiJ71WeNyuAAj2q8EUtxrXbyky5E@cp7-web-042.plabs.ch/
>
> In term of device tree this would result in such hierarchy (stm32mp1 example with 2 virtio RPMSG):
>
> m4_rproc: m4@10000000 {
> compatible = "st,stm32mp1-m4";
> reg = <0x10000000 0x40000>,
> <0x30000000 0x40000>,
> <0x38000000 0x10000>;
> memory-region = <&retram>, <&mcuram>,<&mcuram2>;
> mboxes = <&ipcc 2>, <&ipcc 3>;
> mbox-names = "shutdown", "detach";
> status = "okay";
>
> #address-cells = <1>;
> #size-cells = <0>;
>
> vdev@0 {
> compatible = "rproc-virtio";
> reg = <0>;
> virtio,id = <7>; /* RPMSG */
> memory-region = <&vdev0vring0>, <&vdev0vring1>, <&vdev0buffer>;
> mboxes = <&ipcc 0>, <&ipcc 1>;
> mbox-names = "vq0", "vq1";
> status = "okay";
> };
>
> vdev@1 {
> compatible = "rproc-virtio";
> reg = <1>;
> virtio,id = <7>; /*RPMSG */
> memory-region = <&vdev1vring0>, <&vdev1vring1>, <&vdev1buffer>;
> mboxes = <&ipcc 4>, <&ipcc 5>;
> mbox-names = "vq0", "vq1";
> status = "okay";
> };
> };
>
> I have divided the work in 4 steps to simplify the review, This series implements only
> the step 1:
> step 1: redefine the remoteproc VirtIO device as a platform device
> - migrate rvdev management in remoteproc virtio.c,
> - create a remotproc virtio config ( can be disabled for platform that not use VirtIO IPC.
> step 2: add possibility to declare and probe a VirtIO sub node
> - VirtIO bindings declaration,
> - multi DT VirtIO devices support,
> - introduction of a remote proc virtio bind device mechanism ,
> => https://github.com/arnopo/linux/commits/step2-virtio-in-DT
> step 3: Add memory declaration in VirtIO subnode
> => https://github.com/arnopo/linux/commits/step3-virtio-memories
> step 4: Add mailbox declaration in VirtIO subnode
> => https://github.com/arnopo/linux/commits/step4-virtio-mailboxes
>
> Arnaud Pouliquen (4):
> remoteproc: core: Introduce rproc_rvdev_add_device function
> remoteproc: core: Introduce rproc_add_rvdev function
> remoteproc: Move rproc_vdev management to remoteproc_virtio.c
> remoteproc: virtio: Create platform device for the remoteproc_virtio
>
> drivers/remoteproc/remoteproc_core.c | 153 +++---------------
> drivers/remoteproc/remoteproc_internal.h | 23 ++-
> drivers/remoteproc/remoteproc_virtio.c | 188 ++++++++++++++++++++---
> include/linux/remoteproc.h | 6 +-
> 4 files changed, 209 insertions(+), 161 deletions(-)
>
> --
> 2.24.3
>

\
 
 \ /
  Last update: 2022-07-04 19:49    [W:0.080 / U:1.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site