Messages in this thread Patch in this message |  | | From | Marcus Folkesson <> | Subject | [PATCH v3 7/9] dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry | Date | Mon, 4 Jul 2022 19:21:14 +0200 |
| |
The Data Ready Output Pin is either hard wired to work as high impedance or push-pull. Make it configurable.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- .../devicetree/bindings/iio/adc/microchip,mcp3911.yaml | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml index 95ab285f4eba..57a16380f864 100644 --- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml @@ -36,6 +36,13 @@ properties: description: IRQ line of the ADC maxItems: 1 + microchip,data-ready-hiz: + description: + Data Ready Pin Inactive State Control + true = The DR pin state is high-impedance when data are NOT ready + false = The DR pin state is a logic high when data are NOT ready + type: boolean + microchip,device-addr: description: Device address when multiple MCP3911 chips are present on the same SPI bus. $ref: /schemas/types.yaml#/definitions/uint32 -- 2.36.1
|  |