lkml.org 
[lkml]   [2022]   [Jul]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v4 3/3] ARM: dts: lan966x: Add UDPHS support
Date
On 01.07.2022 17:03, Herve Codina wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> Hi Claudiu,
>
> On Fri, 1 Jul 2022 10:56:46 +0000
> <Claudiu.Beznea@microchip.com> wrote:
>
>> On 01.07.2022 10:09, Herve Codina wrote:
>>> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>>>
>>> Add UDPHS (the USB High Speed Device Port controller) support.
>>>
>>> The both lan966x SOCs (LAN9662 and LAN9668) have the same UDPHS
>>> IP. This IP is also the same as the one present in the SAMA5D3
>>> SOC.
>>>
>>> Signed-off-by: Herve Codina <herve.codina@bootlin.com>
>>> ---
>>> arch/arm/boot/dts/lan966x.dtsi | 11 +++++++++++
>>> 1 file changed, 11 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi
>>> index 3cb02fffe716..c98e7075c2b4 100644
>>> --- a/arch/arm/boot/dts/lan966x.dtsi
>>> +++ b/arch/arm/boot/dts/lan966x.dtsi
>>> @@ -458,6 +458,17 @@ cpu_ctrl: syscon@e00c0000 {
>>> reg = <0xe00c0000 0x350>;
>>> };
>>>
>>> + udc: usb@e0808000 {
>>> + compatible = "microchip,lan9662-udc",
>>> + "atmel,sama5d3-udc";
>>> + reg = <0x00200000 0x80000>,
>>> + <0xe0808000 0x400>;
>>> + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
>>> + clocks = <&clks GCK_GATE_UDPHS>, <&nic_clk>;
>>> + clock-names = "pclk", "hclk";
>>> + status = "disabled";
>>> + };
>>> +
>>
>> I have these compilation warnings:
>>
>> DTC arch/arm/boot/dts/lan966x-pcb8291.dtb
>> arch/arm/boot/dts/lan966x.dtsi:461.21-470.5: Warning (simple_bus_reg):
>> /soc/usb@e0808000: simple-bus unit address format error, expected "200000"
>> DTC arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb
>> arch/arm/boot/dts/lan966x.dtsi:461.21-470.5: Warning (simple_bus_reg):
>> /soc/usb@e0808000: simple-bus unit address format error, expected "200000"
>> DTC arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dtb
>> arch/arm/boot/dts/lan966x.dtsi:461.21-470.5: Warning (simple_bus_reg):
>> /soc/usb@e0808000: simple-bus unit address format error, expected "200000"
>
> I am a bit confused but these warnings do not appear on my side (patches
> based on v5.19-rc1).
> What is the exact command that leads to these warning ?

Oh, and the set of commands I'm using:
make sama7_defconfig
make menuconfig + enable CONFIG_SOC_LAN966
make W=1 dtbs

>
> Thanks,
> Hervé
>
> --
> Hervé Codina, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com

\
 
 \ /
  Last update: 2022-07-04 07:44    [W:0.106 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site