lkml.org 
[lkml]   [2022]   [Jul]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 1/4] mfd: ch341: add core driver for the WCH CH341 in I2C/SPI/GPIO mode
On Wed, 15 Jun 2022, frank zago wrote:

> The CH341 is a multifunction chip, presenting 3 different USB PID. One
> of these functions is for I2C/SPI/GPIO. This new set of drivers will
> manage I2C and GPIO.
>
> Signed-off-by: frank zago <frank@zago.net>
> ---
> MAINTAINERS | 7 +++
> drivers/mfd/Kconfig | 10 +++++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/ch341-core.c | 90 +++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/ch341.h | 18 ++++++++
> 5 files changed, 126 insertions(+)
> create mode 100644 drivers/mfd/ch341-core.c
> create mode 100644 include/linux/mfd/ch341.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 43d3d07afccd..628eeaa9bf68 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -21475,6 +21475,13 @@ M: David Härdeman <david@hardeman.nu>
> S: Maintained
> F: drivers/media/rc/winbond-cir.c
>
> +WINCHIPHEAD CH341 I2C/GPIO MFD DRIVER
> +M: Frank Zago <frank@zago.net>
> +L: linux-usb@vger.kernel.org
> +S: Maintained
> +F: drivers/mfd/ch341-core.c
> +F: include/linux/mfd/ch341.h
> +
> WINSYSTEMS EBC-C384 WATCHDOG DRIVER
> M: William Breathitt Gray <vilhelm.gray@gmail.com>
> L: linux-watchdog@vger.kernel.org
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 3b59456f5545..893acc821a42 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -1784,6 +1784,16 @@ config MFD_LOCHNAGAR
> help
> Support for Cirrus Logic Lochnagar audio development board.
>
> +config MFD_CH341
> + tristate "WinChipHead CH341 in I2C/SPI/GPIO mode"
> + depends on USB
> + help
> + If you say yes to this option, support for the CH341 series
> + of chips, running in I2C/SPI/GPIO mode will be included.
> +
> + This driver can also be built as a module. If so, the
> + module will be called ch341-core.
> +
> config MFD_ARIZONA
> select REGMAP
> select REGMAP_IRQ
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 858cacf659d6..fd615ab3929f 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -13,6 +13,7 @@ obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o
> obj-$(CONFIG_ARCH_BCM2835) += bcm2835-pm.o
> obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o
> obj-$(CONFIG_MFD_BD9571MWV) += bd9571mwv.o
> +obj-$(CONFIG_MFD_CH341) += ch341-core.o
> obj-$(CONFIG_MFD_CROS_EC_DEV) += cros_ec_dev.o
> obj-$(CONFIG_MFD_ENE_KB3930) += ene-kb3930.o
> obj-$(CONFIG_MFD_EXYNOS_LPASS) += exynos-lpass.o
> diff --git a/drivers/mfd/ch341-core.c b/drivers/mfd/ch341-core.c
> new file mode 100644
> index 000000000000..f08a67dd6074
> --- /dev/null
> +++ b/drivers/mfd/ch341-core.c
> @@ -0,0 +1,90 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Core driver for the CH341A, CH341B and CH341T in I2C/SPI/GPIO
> + * mode. There are cell drivers available for I2C and GPIO. SPI is not
> + * yet supported.
> + *
> + * Copyright 2022, Frank Zago
> + * Copyright (c) 2017 Gunar Schorcht (gunar@schorcht.net)
> + * Copyright (c) 2016 Tse Lun Bien
> + * Copyright (c) 2014 Marco Gittler
> + * Copyright (c) 2006-2007 Till Harbaum (Till@Harbaum.org)
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/mfd/ch341.h>
> +#include <linux/mfd/core.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/usb.h>
> +
> +static const struct mfd_cell ch341_devs[] = {
> + {
> + .name = "ch341-gpio",
> + },
> + {
> + .name = "ch341-i2c",
> + },
> +};

These should both be on one line each.

> +static int ch341_usb_probe(struct usb_interface *iface,
> + const struct usb_device_id *usb_id)
> +{
> + struct usb_endpoint_descriptor *bulk_out;
> + struct usb_endpoint_descriptor *bulk_in;
> + struct usb_endpoint_descriptor *intr_in;
> + struct ch341_ddata *ddata;
> + int ret;
> +
> + ddata = devm_kzalloc(&iface->dev, sizeof(*ddata), GFP_KERNEL);
> + if (!ddata)
> + return -ENOMEM;
> +
> + ddata->usb_dev = interface_to_usbdev(iface);
> + mutex_init(&ddata->usb_lock);
> +
> + ret = usb_find_common_endpoints(iface->cur_altsetting, &bulk_in,
> + &bulk_out, &intr_in, NULL);
> + if (ret) {
> + dev_err(&iface->dev, "Could not find all endpoints\n");
> + return -ENODEV;
> + }
> +
> + ddata->ep_in = bulk_in->bEndpointAddress;
> + ddata->ep_out = bulk_out->bEndpointAddress;
> + ddata->ep_intr = intr_in->bEndpointAddress;
> + ddata->ep_intr_interval = intr_in->bInterval;
> +
> + usb_set_intfdata(iface, ddata);
> +
> + ret = mfd_add_devices(&iface->dev, PLATFORM_DEVID_AUTO, ch341_devs,
> + ARRAY_SIZE(ch341_devs), NULL, 0, NULL);
> + if (ret)
> + return dev_err_probe(&iface->dev, ret,
> + "Failed to register child devices\n");
> +
> + return 0;
> +}
> +
> +static void ch341_usb_disconnect(struct usb_interface *usb_if)
> +{
> + mfd_remove_devices(&usb_if->dev);

Why not use the devm_* version?

> +}
> +
> +static const struct usb_device_id ch341_usb_table[] = {
> + { USB_DEVICE(0x1a86, 0x5512) },
> + { }
> +};
> +MODULE_DEVICE_TABLE(usb, ch341_usb_table);
> +
> +static struct usb_driver ch341_usb_driver = {
> + .name = "ch341-mfd",
> + .id_table = ch341_usb_table,
> + .probe = ch341_usb_probe,
> + .disconnect = ch341_usb_disconnect,
> +};
> +module_usb_driver(ch341_usb_driver);
> +
> +MODULE_AUTHOR("Frank Zago <frank@zago.net>");
> +MODULE_DESCRIPTION("CH341 USB to I2C/SPI/GPIO adapter");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/mfd/ch341.h b/include/linux/mfd/ch341.h
> new file mode 100644
> index 000000000000..44f5da0720bd
> --- /dev/null
> +++ b/include/linux/mfd/ch341.h
> @@ -0,0 +1,18 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/* Definitions for the CH341 driver */

What definitions?

> +
> +#include <linux/mutex.h>
> +#include <linux/types.h>
> +
> +struct usb_device;
> +struct usb_interface;
> +
> +struct ch341_ddata {
> + struct usb_device *usb_dev;
> + struct mutex usb_lock;
> +
> + int ep_in;
> + int ep_out;
> + int ep_intr;
> + u8 ep_intr_interval;
> +};

--
Lee Jones [李琼斯]
Principal Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2022-07-04 12:09    [W:0.159 / U:0.672 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site