lkml.org 
[lkml]   [2022]   [Jul]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 00/13] coresight: Add new API to allocate trace source ID values
Date
The current method for allocating trace source ID values to sources is
to use a fixed algorithm for CPU based sources of (cpu_num * 2 + 0x10).
The STM is allocated ID 0x1.

This fixed algorithm is used in both the CoreSight driver code, and by
perf when writing the trace metadata in the AUXTRACE_INFO record.

The method needs replacing as currently:-
1. It is inefficient in using available IDs.
2. Does not scale to larger systems with many cores and the algorithm
has no limits so will generate invalid trace IDs for cpu number > 44.

Additionally requirements to allocate additional system IDs on some
systems have been seen.

This patch set introduces an API that allows the allocation of trace IDs
in a dynamic manner.

Architecturally reserved IDs are never allocated, and the system is
limited to allocating only valid IDs.

Each of the current trace sources ETM3.x, ETM4.x and STM is updated to use
the new API.

For the ETMx.x devices IDs are allocated on certain events
a) When using sysfs, an ID will be allocated on hardware enable, or a read of
sysfs TRCTRACEID register and freed when the sysfs reset is written.

b) When using perf, ID is allocated on hardware enable, and freed on
hardware disable. IDs are communicated using the AUX_OUTPUT_HW_ID packet.
The ID allocator is notified when perf sessions start and stop
so CPU based IDs are kept constant throughout any perf session.


Note: This patchset breaks backward compatibility for perf record and
perf report.

Because the method for generating the AUXTRACE_INFO meta data has
changed, using an older perf record will result in metadata that
does not match the trace IDs used in the recorded trace data.
This mismatch will cause subsequent decode to fail.

The version of the AUXTRACE_INFO has been updated to reflect the fact that
the trace source IDs are no longer present in the metadata. This will
mean older versions of perf report cannot decode the file.

Applies to coresight/next [c06475910b52]
Tested on DB410c

Changes since v1:
(after feedback & discussion with Mathieu & Suzuki).

1) API has changed. The global trace ID map is managed internally, so it
is no longer passed in to the API functions.

2) perf record does not use sysfs to find the trace IDs. These are now
output as AUX_OUTPUT_HW_ID events. The drivers, perf record, and perf report
have been updated accordingly to generate and handle these events.

Mike Leach (13):
coresight: trace-id: Add API to dynamically assign Trace ID values
coresight: trace-id: update CoreSight core to use Trace ID API
coresight: stm: Update STM driver to use Trace ID API
coresight: etm4x: Update ETM4 driver to use Trace ID API
coresight: etm3x: Update ETM3 driver to use Trace ID API
coresight: etmX.X: stm: Remove unused legacy source Trace ID ops
coresight: perf: traceid: Add perf notifiers for Trace ID
perf: cs-etm: Move mapping of Trace ID and cpu into helper function
perf: cs-etm: Update record event to use new Trace ID protocol
kernel: events: Export perf_report_aux_output_id()
perf: cs-etm: Handle PERF_RECORD_AUX_OUTPUT_HW_ID packet
coresight: events: PERF_RECORD_AUX_OUTPUT_HW_ID used for Trace ID
coresight: trace-id: Add debug & test macros to Trace ID allocation

drivers/hwtracing/coresight/Makefile | 2 +-
drivers/hwtracing/coresight/coresight-core.c | 49 +---
.../hwtracing/coresight/coresight-etm-perf.c | 17 ++
drivers/hwtracing/coresight/coresight-etm.h | 3 +-
.../coresight/coresight-etm3x-core.c | 85 +++---
.../coresight/coresight-etm3x-sysfs.c | 28 +-
.../coresight/coresight-etm4x-core.c | 65 ++++-
.../coresight/coresight-etm4x-sysfs.c | 32 ++-
drivers/hwtracing/coresight/coresight-etm4x.h | 3 +
drivers/hwtracing/coresight/coresight-stm.c | 49 +---
.../hwtracing/coresight/coresight-trace-id.c | 263 ++++++++++++++++++
.../hwtracing/coresight/coresight-trace-id.h | 65 +++++
include/linux/coresight-pmu.h | 31 ++-
include/linux/coresight.h | 3 -
kernel/events/core.c | 1 +
tools/include/linux/coresight-pmu.h | 31 ++-
tools/perf/arch/arm/util/cs-etm.c | 21 +-
.../perf/util/cs-etm-decoder/cs-etm-decoder.c | 9 +
tools/perf/util/cs-etm.c | 220 +++++++++++++--
tools/perf/util/cs-etm.h | 14 +-
20 files changed, 784 insertions(+), 207 deletions(-)
create mode 100644 drivers/hwtracing/coresight/coresight-trace-id.c
create mode 100644 drivers/hwtracing/coresight/coresight-trace-id.h

--
2.17.1

\
 
 \ /
  Last update: 2022-07-04 10:13    [W:0.265 / U:20.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site