lkml.org 
[lkml]   [2022]   [Jul]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v12 3/3] usb: typec: anx7411: Add Analogix PD ANX7411 support
Hi greg k-h, I'll add return value checking.
Thanks,
Xin

On Tue, Jun 28, 2022 at 08:26:07AM +0200, Greg Kroah-Hartman wrote:
> On Tue, Jun 28, 2022 at 12:48:42PM +0800, Xin Ji wrote:
> > +static int anx7411_process_cmd(struct anx7411_data *ctx)
> > +{
> > + struct device *dev = &ctx->spi_client->dev;
> > + struct fw_msg *msg = &ctx->recv_msg;
> > + u8 len;
> > + u8 crc;
> > + int ret;
> > +
> > + /* Read message from firmware */
> > + ret = anx7411_reg_block_read(ctx->spi_client, CMD_RECV_BUF,
> > + MSG_LEN, (u8 *)msg);
> > + if (ret < 0)
> > + return 0;
> > +
> > + if (!msg->msg_len)
> > + return 0;
> > +
> > + anx7411_reg_write(ctx->spi_client, CMD_RECV_BUF, 0);
>
> Again, you are not checking the return value here. What happens if this
> failed?
>
> > +
> > + len = msg->msg_len & MSG_LEN_MASK;
> > + crc = checksum(dev, (u8 *)msg, len + HEADER_LEN);
> > + if (crc) {
> > + dev_err(dev, "message error crc(0x%.02x)\n", crc);
> > + return -ERANGE;
> > + }
> > +
> > + return anx7411_parse_cmd(ctx, msg->msg_type, msg->buf, len - 1);
> > +}
> > +
> > +static void anx7411_translate_payload(struct device *dev, __le32 *payload,
> > + u32 *pdo, int nr, const char *type)
> > +{
> > + int i;
> > +
> > + if (nr > PDO_MAX_OBJECTS) {
> > + dev_err(dev, "nr(%d) exceed PDO_MAX_OBJECTS(%d)\n",
> > + nr, PDO_MAX_OBJECTS);
> > +
> > + return;
> > + }
> > +
> > + for (i = 0; i < nr; i++)
> > + payload[i] = cpu_to_le32(pdo[i]);
> > +}
> > +
> > +static void anx7411_config(struct anx7411_data *ctx)
> > +{
> > + struct device *dev = &ctx->spi_client->dev;
> > + struct typec_params *typecp = &ctx->typec;
> > + __le32 payload[PDO_MAX_OBJECTS];
> > +
> > + /* Config PD FW work under PD 2.0 */
> > + anx7411_reg_write(ctx->spi_client, PD_REV_INIT, PD_REV20);
> > + anx7411_reg_write(ctx->tcpc_client, FW_CTRL_0,
> > + UNSTRUCT_VDM_EN | DELAY_200MS |
> > + VSAFE1 | FRS_EN);
> > + anx7411_reg_write(ctx->spi_client, FW_CTRL_1,
> > + AUTO_PD_EN | FORCE_SEND_RDO);
>
> Same with all of these, what happens if this fails?
>
> thanks,
>
> greg k-h

\
 
 \ /
  Last update: 2022-07-05 04:56    [W:0.547 / U:0.664 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site