lkml.org 
[lkml]   [2022]   [Jul]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] watchdog: max63xx_wdt: Add support for specifying WDI logic via GPIO
On Wednesday 04 May 2022 00:05:50 Pali Rohár wrote:
> On Monday 02 May 2022 21:37:16 Guenter Roeck wrote:
> > On 5/2/22 20:57, Tzung-Bi Shih wrote:
> > > On Fri, Apr 29, 2022 at 03:13:49PM +0200, Pali Rohár wrote:
> > > > @@ -27,6 +27,7 @@
> > > > #include <linux/io.h>
> > > > #include <linux/slab.h>
> > > > #include <linux/property.h>
> > > > +#include <linux/gpio/consumer.h>
> > >
> > > It would be better to keep them alphabetically. Anyway, they aren't sorted
> > > originally...
> > >
> > > > +static void max63xx_gpio_ping(struct max63xx_wdt *wdt)
> > > > +{
> > > > + spin_lock(&wdt->lock);
> > >
> > > Does it really need to acquire the lock? It looks like the lock is to prevent
> > > concurrent accesses to the mmap in max63xx_mmap_ping() and max63xx_mmap_set().
> > >
> >
> > Actually, that doesn't work at all. spin_lock() directly contradicts
> > with gpiod_set_value_cansleep().
> >
> > > > + gpiod_set_value_cansleep(wdt->gpio_wdi, 1);
> > > > + udelay(1);
> > >
> > > Doesn't it need to include <linux/delay.h> for udelay()?
> > >
> > > > @@ -225,10 +240,19 @@ static int max63xx_wdt_probe(struct platform_device *pdev)
> > > > return -EINVAL;
> > > > }
> > > > + wdt->gpio_wdi = devm_gpiod_get(dev, NULL, GPIOD_FLAGS_BIT_DIR_OUT);
> > > > + if (IS_ERR(wdt->gpio_wdi) && PTR_ERR(wdt->gpio_wdi) != -ENOENT)
> > >
> > > Use devm_gpiod_get_optional() to make the intent clear. Also, it gets rid of
> > > the check for -ENOENT.
> > >
> > > > + return dev_err_probe(dev, PTR_ERR(wdt->gpio_wdi),
> > > > + "unable to request gpio: %ld\n",
> > > > + PTR_ERR(wdt->gpio_wdi));
> > >
> > > It doesn't need to again print for PTR_ERR(wdt->gpio_wdi). dev_err_probe()
> > > prints the error.
> > >
> > > > err = max63xx_mmap_init(pdev, wdt);
> > > > if (err)
> > > > return err;
> > > > + if (!IS_ERR(wdt->gpio_wdi))
> > > > + wdt->ping = max63xx_gpio_ping;
> > >
> > > Thus, the max63xx_gpio_ping() overrides max63xx_mmap_ping() if the GPIO was
> > > provided? It would be better to mention the behavior in the commit message.
> > >
> > > Also, could both the assignments of `wdt->gpio_wdi` and `wdt->ping` happen
> > > after max63xx_mmap_init()?
> >
>
> Hello! I'm going to look at all these issues. Recently I sent max63
> watchdog driver also into U-Boot and seems that I mixed DTS and driver
> code between U-Boot and Kernel... and tested something mixed.
>
> I will do new testing again, and will check that I'm testing correct
> code.

Hello! Now I sent a new version V3. I have tested it on PowerPC P2020
based board where watchdog registers are exported via CPLD and new V3
version is working fine.

\
 
 \ /
  Last update: 2022-07-05 02:14    [W:0.104 / U:0.444 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site