lkml.org 
[lkml]   [2022]   [Jul]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv2] vgaarb: Add module param to allow for choosing the boot VGA device
[+cc Alex, Cornelia, kvm]

On Mon, Jul 04, 2022 at 05:12:44PM -0400, Cal Peake wrote:
> Add module parameter 'bootdev' to the VGA arbiter to allow the user
> to choose which PCI device should be selected over any others as the
> boot VGA device.
>
> When using a multi-GPU system with one or more GPUs being used in
> conjunction with VFIO for passthrough to a virtual machine, if the
> VGA arbiter settles on a passthrough GPU as the boot VGA device,
> once the VFIO PCI driver claims that GPU, all display output is lost
> and the result is blank screens and no VT access.

I cc'd KVM folks in case they have anything to add here because I'm
not a VFIO passthrough expert.

It sounds like the problem occurs when the VFIO driver claims the GPU.
I assume that happens after boot, when setting up for the virtual
machine? If so, is there a way to avoid the problem at run-time so
the admin doesn't have to decide at boot-time which GPU will be passed
through to a VM? Is it possible or desirable to pass through GPU A to
VM A, then after VM A exits, pass through GPU B to VM B?

> Signed-off-by: Cal Peake <cp@absolutedigital.net>
> ---
> .../admin-guide/kernel-parameters.txt | 7 ++++
> drivers/pci/vgaarb.c | 40 +++++++++++++++++++
> 2 files changed, 47 insertions(+)
>
> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> index 2522b11e593f..21ac87f4a8a9 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -6518,6 +6518,13 @@
> This is actually a boot loader parameter; the value is
> passed to the kernel using a special protocol.
>
> + vgaarb.bootdev= [PCI] Specify the PCI ID (e.g. 0e:00.0) of the
> + device to use as the boot VGA device, overriding
> + the heuristic used to normally determine which
> + of the eligible VGA devices to use. If the device
> + specified is not valid or not eligible, then we
> + fallback to the heuristic.
> +
> vm_debug[=options] [KNL] Available with CONFIG_DEBUG_VM=y.
> May slow down system boot speed, especially when
> enabled on systems with a large amount of memory.
> diff --git a/drivers/pci/vgaarb.c b/drivers/pci/vgaarb.c
> index f80b6ec88dc3..d3689b7dc63d 100644
> --- a/drivers/pci/vgaarb.c
> +++ b/drivers/pci/vgaarb.c
> @@ -35,6 +35,34 @@
>
> #include <linux/vgaarb.h>
>
> +static char *bootdev __initdata;
> +module_param(bootdev, charp, 0);
> +MODULE_PARM_DESC(bootdev, "Force boot device to the specified PCI ID");
> +
> +/*
> + * Initialize to the last possible ID to have things work as normal
> + * when no 'bootdev' option is supplied. We especially do not want
> + * this to be zero (0) since that is a valid PCI ID (00:00.0).
> + */
> +static u16 bootdev_id = 0xffff;
> +
> +static void __init parse_bootdev(char *input)
> +{
> + unsigned int bus, dev, func;
> + int ret;
> +
> + if (input == NULL)
> + return;
> +
> + ret = sscanf(input, "%x:%x.%x", &bus, &dev, &func);
> + if (ret != 3) {
> + pr_warn("Improperly formatted PCI ID: %s\n", input);
> + return;
> + }
> +
> + bootdev_id = PCI_DEVID(bus, PCI_DEVFN(dev, func));
> +}
> +
> static void vga_arbiter_notify_clients(void);
> /*
> * We keep a list of all vga devices in the system to speed
> @@ -53,6 +81,7 @@ struct vga_device {
> bool bridge_has_one_vga;
> bool is_firmware_default; /* device selected by firmware */
> unsigned int (*set_decode)(struct pci_dev *pdev, bool decode);
> + bool is_chosen_one; /* device specified on command line */
> };
>
> static LIST_HEAD(vga_list);
> @@ -605,6 +634,7 @@ static bool vga_is_boot_device(struct vga_device *vgadev)
>
> /*
> * We select the default VGA device in this order:
> + * User specified device (see module param bootdev=)
> * Firmware framebuffer (see vga_arb_select_default_device())
> * Legacy VGA device (owns VGA_RSRC_LEGACY_MASK)
> * Non-legacy integrated device (see vga_arb_select_default_device())
> @@ -612,6 +642,14 @@ static bool vga_is_boot_device(struct vga_device *vgadev)
> * Other device (see vga_arb_select_default_device())
> */
>
> + if (boot_vga && boot_vga->is_chosen_one)
> + return false;
> +
> + if (bootdev_id == PCI_DEVID(pdev->bus->number, pdev->devfn)) {
> + vgadev->is_chosen_one = true;
> + return true;
> + }
> +
> /*
> * We always prefer a firmware default device, so if we've already
> * found one, there's no need to consider vgadev.
> @@ -1544,6 +1582,8 @@ static int __init vga_arb_device_init(void)
> int rc;
> struct pci_dev *pdev;
>
> + parse_bootdev(bootdev);
> +
> rc = misc_register(&vga_arb_device);
> if (rc < 0)
> pr_err("error %d registering device\n", rc);
> --
> 2.35.3
>

\
 
 \ /
  Last update: 2022-07-04 23:39    [W:0.076 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site