lkml.org 
[lkml]   [2022]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/5] clk/qcom: Support gdsc collapse polling using 'reset' inteface
Date

Some clients like adreno gpu driver would like to ensure that its gdsc
is collapsed at hardware during a gpu reset sequence. This is because it
has a votable gdsc which could be ON due to a vote from another subsystem
like tz, hyp etc or due to an internal hardware signal. To allow
this, gpucc driver can expose an interface to the client driver using
reset framework. Using this the client driver can trigger a polling within
the gdsc driver.

This series is rebased on top of linus's master branch.

Related discussion: https://patchwork.freedesktop.org/patch/493144/


Akhil P Oommen (5):
dt-bindings: clk: qcom: Support gpu cx gdsc reset
clk: qcom: Allow custom reset ops
clk: qcom: gpucc-sc7280: Add cx collapse reset support
clk: qcom: gdsc: Add a reset op to poll gdsc collapse
arm64: dts: qcom: sc7280: Add Reset support for gpu

arch/arm64/boot/dts/qcom/sc7280.dtsi | 3 +++
drivers/clk/qcom/gdsc.c | 23 +++++++++++++++++++----
drivers/clk/qcom/gdsc.h | 7 +++++++
drivers/clk/qcom/gpucc-sc7280.c | 6 ++++++
drivers/clk/qcom/reset.c | 6 ++++++
drivers/clk/qcom/reset.h | 2 ++
include/dt-bindings/clock/qcom,gpucc-sc7280.h | 3 +++
7 files changed, 46 insertions(+), 4 deletions(-)

--
2.7.4

\
 
 \ /
  Last update: 2022-07-30 11:19    [W:0.339 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site