lkml.org 
[lkml]   [2022]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 1/4] dt-bindings: net: dsa: mediatek,mt7530: make trivial changes
    Date
    Make trivial changes on the binding.

    - Update title to include MT7531 switch.
    - Add me as a maintainer. List maintainers in alphabetical order by first
    name.
    - Add description to compatible strings.
    - Fix MCM description. mediatek,mcm is not used on MT7623NI.
    - Add description for reset-gpios.
    - Remove quotes from $ref: "dsa.yaml#".

    Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
    ---
    .../bindings/net/dsa/mediatek,mt7530.yaml | 27 ++++++++++++++-----
    1 file changed, 20 insertions(+), 7 deletions(-)

    diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
    index 17ab6c69ecc7..541984a7d2d4 100644
    --- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
    +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
    @@ -4,12 +4,13 @@
    $id: http://devicetree.org/schemas/net/dsa/mediatek,mt7530.yaml#
    $schema: http://devicetree.org/meta-schemas/core.yaml#

    -title: Mediatek MT7530 Ethernet switch
    +title: Mediatek MT7530 and MT7531 Ethernet Switches

    maintainers:
    - - Sean Wang <sean.wang@mediatek.com>
    + - Arınç ÜNAL <arinc.unal@arinc9.com>
    - Landen Chao <Landen.Chao@mediatek.com>
    - DENG Qingfang <dqfext@gmail.com>
    + - Sean Wang <sean.wang@mediatek.com>

    description: |
    Port 5 of mt7530 and mt7621 switch is muxed between:
    @@ -66,6 +67,14 @@ properties:
    - mediatek,mt7531
    - mediatek,mt7621

    + description: |
    + mediatek,mt7530:
    + For standalone MT7530 and multi-chip module MT7530 in MT7623AI SoC.
    + mediatek,mt7531:
    + For standalone MT7531.
    + mediatek,mt7621:
    + For multi-chip module MT7530 in MT7621AT, MT7621DAT and MT7621ST SoCs.
    +
    reg:
    maxItems: 1

    @@ -79,7 +88,7 @@ properties:
    gpio-controller:
    type: boolean
    description:
    - if defined, MT7530's LED controller will run on GPIO mode.
    + If defined, MT7530's LED controller will run on GPIO mode.

    "#interrupt-cells":
    const: 1
    @@ -98,11 +107,15 @@ properties:
    mediatek,mcm:
    type: boolean
    description:
    - if defined, indicates that either MT7530 is the part on multi-chip
    - module belong to MT7623A has or the remotely standalone chip as the
    - function MT7623N reference board provided for.
    + Used for MT7621AT, MT7621DAT, MT7621ST and MT7623AI SoCs which the MT7530
    + switch is a part of the multi-chip module.

    reset-gpios:
    + description:
    + GPIO to reset the switch. Use this if mediatek,mcm is not used.
    + This property is optional because some boards share the reset line with
    + other components which makes it impossible to probe the switch if the
    + reset line is used.
    maxItems: 1

    reset-names:
    @@ -148,7 +161,7 @@ required:
    - reg

    allOf:
    - - $ref: "dsa.yaml#"
    + - $ref: dsa.yaml#
    - if:
    required:
    - mediatek,mcm
    --
    2.34.1
    \
     
     \ /
      Last update: 2022-07-30 16:29    [W:2.432 / U:0.368 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site