lkml.org 
[lkml]   [2022]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 2/2] ARM: dts: sun8i: Add R16 Vista E board from RenewWorldOutreach
From
Date
On 6/15/22 4:39 AM, Suniel Mahesh wrote:
> The R16-Vista-E board from RenewWorldOutreach based on allwinner
> R16(A33).
>
> General features:
> - 1GB RAM
> - microSD slot
> - Realtek Wifi
> - 1 x USB 2.0
> - HDMI IN
> - HDMI OUT
> - Audio out
> - MIPI DSI
> - TI DLPC3433
>
> It has also connectors to connect an external mini keypad.
>
> Signed-off-by: Christopher Vollo <chris@renewoutreach.org>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
>
> ---
> Changes for v2:
> - Add missing compatible string
> - insert missing signatures of contributors
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/sun8i-r16-renew-vista-e.dts | 361 ++++++++++++++++++
> 2 files changed, 362 insertions(+)
> create mode 100644 arch/arm/boot/dts/sun8i-r16-renew-vista-e.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 184899808ee7..b5966c0742e1 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1353,6 +1353,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
> sun8i-r16-nintendo-nes-classic.dtb \
> sun8i-r16-nintendo-super-nes-classic.dtb \
> sun8i-r16-parrot.dtb \
> + sun8i-r16-renew-vista-e.dtb \
> sun8i-r40-bananapi-m2-ultra.dtb \
> sun8i-r40-oka40i-c.dtb \
> sun8i-s3-elimo-initium.dtb \
> diff --git a/arch/arm/boot/dts/sun8i-r16-renew-vista-e.dts b/arch/arm/boot/dts/sun8i-r16-renew-vista-e.dts
> new file mode 100644
> index 000000000000..45f620203c33
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun8i-r16-renew-vista-e.dts
> @@ -0,0 +1,361 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2022 RenewWorldOutreach
> + * Copyright (C) 2022 Amarula Solutions(India)
> + */
> +
> +/dts-v1/;
> +#include "sun8i-a33.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/leds/common.h>
> +
> +/ {
> + model = "RenewWorldOutreach R16-Vista-E";
> + compatible = "renewworldoutreach,r16-vista-e", "allwinner,sun8i-r16", "allwinner,sun8i-a33";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + poll-interval = <100>;
> +
> + ok {
> + label = "ok";
> + linux,code = <KEY_OK>;
> + gpios = <&pio 4 0 GPIO_ACTIVE_LOW>;
> + };
> +
> + left {
> + label = "left";
> + linux,code = <KEY_LEFT>;
> + gpios = <&pio 4 1 GPIO_ACTIVE_LOW>;
> + };
> +
> + right {
> + label = "right";
> + linux,code = <KEY_RIGHT>;
> + gpios = <&pio 4 2 GPIO_ACTIVE_LOW>;
> + };
> +
> + up {
> + label = "up";
> + linux,code = <KEY_UP>;
> + gpios = <&pio 4 3 GPIO_ACTIVE_LOW>;
> + };
> +
> + down {
> + label = "down";
> + linux,code = <KEY_DOWN>;
> + gpios = <&pio 4 4 GPIO_ACTIVE_LOW>;
> + };
> +
> + back {
> + label = "back";
> + linux,code = <KEY_BACK>;
> + gpios = <&pio 4 5 GPIO_ACTIVE_LOW>;
> + };
> +
> + power {
> + label = "power";
> + linux,code = <KEY_POWER>;
> + gpios = <&pio 4 6 GPIO_ACTIVE_LOW>;
> + };
> +
> + vol-down {
> + label = "vol-down";
> + linux,code = <KEY_VOLUMEDOWN>;
> + gpios = <&pio 7 3 GPIO_ACTIVE_LOW>;
> + };
> +
> + vol-up {
> + label = "vol-up";
> + linux,code = <KEY_VOLUMEUP>;
> + gpios = <&pio 7 9 GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + battery-led0 {
> + label = "renew-e:battery-led0";
> + gpios = <&r_pio 0 2 GPIO_ACTIVE_HIGH>;
> + };
> +
> + battery-led1 {
> + label = "renew-e:battery-led1";
> + gpios = <&r_pio 0 3 GPIO_ACTIVE_HIGH>;
> + };
> +
> + battery-led2 {
> + label = "renew-e:battery-led2";
> + gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>;
> + };
> +
> + battery-led3 {
> + label = "renew-e:battery-led3";
> + gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>;
> + };
> +
> + pad-intz {
> + label = "renew-e:pad-intz";
> + gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>;
> + default-state = "on";
> + };

Is this really an LED, or just a generic output?

> +
> + battery-led4 {
> + label = "renew-e:battery-led4";
> + gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
> + };
> +
> + volume-led0 {
> + label = "renew-e:volume-led0";
> + gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
> + };

Indent with tabs, please.

> +
> + volume-led1 {
> + label = "renew-e:volume-led1";
> + gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>;
> + };
> +
> + volume-led2 {
> + label = "renew-e:volume-led2";
> + gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>;
> + };
> +
> + volume-led3 {
> + label = "renew-e:volume-led3";
> + gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>;
> + };
> +
> + volume-led4 {
> + label = "renew-e:volume-led4";
> + gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>;
> + };
> +
> + fans-on {
> + label = "renew-e:fans-on";
> + gpios = <&pio 4 14 GPIO_ACTIVE_HIGH>; /* FAN_ON/OFF: PE14 */
> + default-state = "on";
> + };

Does this drive an LED or control a fan? If it controls a fan, it should use the
gpio-fan binding, and not pretend to be an LED.

It also does not validate against the gpio-leds binding:

sun8i-r16-renew-vista-e.dtb: leds: 'fans-on', 'pad-intz' do not match any of the
regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'

> + };
> +
> + reg_vcc5v0: vcc5v0 {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc5v0";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + };
> +};
> +
> +&codec {
> + status = "okay";
> +};
> +
> +&cpu0 {
> + cpu-supply = <&reg_dcdc3>;
> +};
> +
> +&cpu0_opp_table {
> + opp-1104000000 {
> + opp-hz = /bits/ 64 <1104000000>;
> + opp-microvolt = <1320000>;
> + clock-latency-ns = <244144>; /* 8 32k periods */
> + };
> +
> + opp-1200000000 {
> + opp-hz = /bits/ 64 <1200000000>;
> + opp-microvolt = <1320000>;
> + clock-latency-ns = <244144>; /* 8 32k periods */
> + };
> +};
> +
> +&dai {
> + status = "okay";
> +};
> +
> +&de {
> + status = "okay";
> +};
> +
> +&dphy {
> + status = "okay";
> +};
> +
> +&ehci0 {
> + status = "okay";
> +};
> +
> +&mmc0 {
> + vmmc-supply = <&reg_dcdc1>;
> + bus-width = <4>;
> + non-removable;
> + status = "okay";
> +};
> +
> +&mmc1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc1_pg_pins>;
> + vmmc-supply = <&reg_dcdc1>;
> + bus-width = <4>;
> + broken-cd;
> + status = "okay";
> +};
> +
> +&ohci0 {
> + status = "okay";
> +};
> +
> +&r_rsb {
> + status = "okay";
> +
> + axp22x: pmic@3a3 {
> + compatible = "x-powers,axp223";
> + reg = <0x3a3>;
> + interrupt-parent = <&r_intc>;
> + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
> + eldoin-supply = <&reg_dcdc1>;
> + x-powers,drive-vbus-en;
> + };
> +};
> +
> +#include "axp223.dtsi"
> +
> +&ac_power_supply {
> + status = "okay";
> +};
> +
> +&reg_aldo1 {
> + regulator-always-on;
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-name = "vcc-io";
> +};
> +
> +&reg_aldo2 {
> + regulator-always-on;
> + regulator-min-microvolt = <2500000>;
> + regulator-max-microvolt = <2500000>;
> + regulator-name = "vdd-dll";
> +};
> +
> +&reg_aldo3 {
> + regulator-always-on;
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-name = "avcc";
> +};
> +
> +&reg_dc1sw {
> + regulator-name = "vcc-lcd";
> +};
> +
> +&reg_dc5ldo {
> + regulator-always-on;
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1400000>;
> + regulator-name = "vdd-cpus";
> +};
> +
> +&reg_dcdc1 {
> + regulator-always-on;
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-name = "vcc-3v0";
> +};
> +
> +&reg_dcdc2 {
> + regulator-always-on;
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1400000>;
> + regulator-name = "vdd-sys";
> +};
> +
> +&reg_dcdc3 {
> + regulator-always-on;
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1400000>;
> + regulator-name = "vdd-cpu";
> +};
> +
> +&reg_dcdc5 {
> + regulator-always-on;
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-name = "vcc-dram";
> +};
> +
> +&reg_dldo1 {
> + regulator-always-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc-3v3-main1";
> +};
> +
> +&reg_dldo2 {
> + regulator-always-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc-3v3-main2";
> +};
> +
> +&reg_dldo3 {
> + regulator-always-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc-3v3-main3";
> +};
> +
> +&reg_dldo4 {
> + regulator-always-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc-3v3-main4";
> +};
> +
> +&reg_eldo1 {
> + regulator-always-on;
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-name = "vcc-1v2-hdmi";
> +};
> +
> +&reg_drivevbus {
> + regulator-name = "usb0-vbus";
> + status = "okay";
> +};
> +
> +&reg_rtc_ldo {
> + regulator-name = "vcc-rtc";
> +};
> +
> +&sound {
> + status = "okay";
> + simple-audio-card,routing =
> + "Left DAC", "AIF1 Slot 0 Left",
> + "Right DAC", "AIF1 Slot 0 Right";

Please use "DACL" and "DACR" here, instead of the AIF1 Slot 0 widgets. The AIF1
Slot 0 widgets do not accurately describe the audio routing and are only kept
for backward compatibility.

> +};
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_pb_pins>;
> + status = "okay";
> +};
> +
> +&usb_otg {
> + dr_mode = "host";
> + status = "okay";
> +};
> +
> +&usbphy {
> + usb0_vbus-supply = <&reg_vcc5v0>;

You enable drivevbus and label it as "usb0-vbus". But this suggests the VBUS is
always on. Which is correct?

> + status = "okay";
> +};
>

\
 
 \ /
  Last update: 2022-07-03 09:44    [W:0.101 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site