lkml.org 
[lkml]   [2022]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 6/6] can: sja1000: Add support for RZ/N1 SJA1000 CAN Controller
Date
Hi Uwe,

Thanks for the feedback.

> Subject: Re: [PATCH 6/6] can: sja1000: Add support for RZ/N1 SJA1000 CAN
> Controller
>
> On Sun, Jul 03, 2022 at 07:15:16AM +0000, Biju Das wrote:
> > Hi Marc and Uwe,
> >
> > > Subject: Re: [PATCH 6/6] can: sja1000: Add support for RZ/N1 SJA1000
> > > CAN Controller
> > >
> > > On 02.07.2022 15:01:30, Biju Das wrote:
> > > > The SJA1000 CAN controller on RZ/N1 SoC has some differences
> > > > compared to others like it has no clock divider register (CDR)
> > > > support and it has no HW loopback(HW doesn't see tx messages on
> rx).
> > > >
> > > > This patch adds support for RZ/N1 SJA1000 CAN Controller.
> > > >
> > > > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> > > > ---
> > > > drivers/net/can/sja1000/sja1000_platform.c | 34
> > > > ++++++++++++++++++----
> > > > 1 file changed, 29 insertions(+), 5 deletions(-)
> > > >
> > > > diff --git a/drivers/net/can/sja1000/sja1000_platform.c
> > > > b/drivers/net/can/sja1000/sja1000_platform.c
> > > > index 5f3d362e0da5..8e63af76a013 100644
> > > > --- a/drivers/net/can/sja1000/sja1000_platform.c
> > > > +++ b/drivers/net/can/sja1000/sja1000_platform.c
> > > [...]
> > > > @@ -262,6 +276,16 @@ static int sp_probe(struct platform_device
> *pdev)
> > > > priv->reg_base = addr;
> > > >
> > > > if (of) {
> > > > + clk = devm_clk_get_optional(&pdev->dev, "can_clk");
> > > > + if (IS_ERR(clk))
> > > > + return dev_err_probe(&pdev->dev, PTR_ERR(clk),
> "no CAN
> > > clk");
> > > > +
> > > > + if (clk) {
> > > > + priv->can.clock.freq = clk_get_rate(clk) / 2;
> > > > + if (!priv->can.clock.freq)
> > > > + return dev_err_probe(&pdev->dev, -EINVAL,
> "Zero
> > > CAN clk rate");
> > > > + }
> > >
> > > There's no clk_prepare_enable in the driver. You might go the quick
> > > and dirty way an enable the clock right here. IIRC there's a new
> > > convenience function to get and enable a clock, managed bei devm.
> > > Uwe (Cc'ed) can point you in the right direction.
> >
> > + clk
> >
> > As per the patch history devm version for clk_prepare_enable is
> rejected[1], so the individual drivers implemented the same using
> devm_add_action_or_reset [2].
> > So shall I implement devm version here as well?
>
> You want to make use of 7ef9651e9792b08eb310c6beb202cbc947f43cab (which
> is currently in next). If you cherry-pick this to an older kernel
> version, make sure to also pick
> 8b3d743fc9e2542822826890b482afabf0e7522a.

Ok will use "devm_clk_get_optional_enabled" and send V2.

Cheers,
Biju


\
 
 \ /
  Last update: 2022-07-03 12:10    [W:0.138 / U:0.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site