Messages in this thread Patch in this message | | | From | "Peng Fan (OSS)" <> | Subject | [PATCH V3 10/10] arm64: dts: imx8mp: add NoC node | Date | Sun, 3 Jul 2022 17:11:32 +0800 |
| |
From: Peng Fan <peng.fan@nxp.com>
Add i.MX8MP NoC node to make the interconnect i.MX8MP driver could work. Currently dynamic frequency scaling of the i.MX8MP NoC has not been supported, only NoC initial settings are configured by interconnect driver.
Signed-off-by: Peng Fan <peng.fan@nxp.com> --- arch/arm64/boot/dts/freescale/imx8mp.dtsi | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index eb2d516278eb..13a2ee77d3c6 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -4,6 +4,7 @@ */ #include <dt-bindings/clock/imx8mp-clock.h> +#include <dt-bindings/interconnect/fsl,imx8mp.h> #include <dt-bindings/power/imx8mp-power.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -1019,6 +1020,27 @@ eqos: ethernet@30bf0000 { }; }; + noc: interconnect@32700000 { + compatible = "fsl,imx8mp-noc", "fsl,imx8m-noc", "syscon"; + reg = <0x32700000 0x100000>; + clocks = <&clk IMX8MP_CLK_NOC>; + #interconnect-cells = <1>; + + operating-points-v2 = <&noc_opp_table>; + + noc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200M { + opp-hz = /bits/ 64 <200000000>; + }; + + opp-1000M { + opp-hz = /bits/ 64 <1000000000>; + }; + }; + }; + aips4: bus@32c00000 { compatible = "fsl,aips-bus", "simple-bus"; reg = <0x32c00000 0x400000>; -- 2.25.1
| |